Search Results

The thermal comfort inside automotive cabin has been extensively studied for decades. Traditional CFD models provide accurate simulation results of the air temperature distributions inside cabins but at a relatively high computation cost. In order to reduce the computational cost while still providing reasonable accuracy in simulating the air temperature profile inside a mid-sized sedan cabin, this paper introduces a new simulation tool that utilizes a proper orthogonal decomposition (POD) method. The POD method, an interpolation technique, requires only one set of multiple CFD simulations to produce a set of “snapshots”. Later, any simulations that require CFD runs to solve algorithm equation sets can be simplified by using interpolation between the snapshots provided that the geometry of the cabin keeps the same. As a result, the computation time can be reduced to only a few minutes.

Design optimization is an important engineering design activity. Performing design optimization in the presence of uncertainty has been an active area of research. The approaches used require modeling the random variables using precise probability distributions or representing uncertain quantities as fuzzy sets. This work, however, considers problems in which the random variables are described with imprecise probability distributions, which are highly relevant when there is limited information about the distribution of a random variable. In particular, this paper formulates the imprecise probability design optimization problem and presents an approach for solving it. We present examples for illustrating the approach.

Smoke detection experiments were conducted in the Microgravity Science Glovebox (MSG) on the International Space Station (ISS) during Expedition 15 in an experiment entitled Smoke Aerosol Measurement Experiment (SAME). The preliminary results from these experiments are presented. In order to simulate detection of a prefire overheated-material event, samples of five different materials were heated to temperatures below the ignition point. The smoke generation conditions were controlled to provide repeatable sample surface temperatures and air flow conditions. The smoke properties were measured using particulate aerosol diagnostics that measure different moments of the size distribution. These statistics were combined to determine the count mean diameter which can be used to describe the overall smoke distribution.

With a renewed focus on manned exploration, NASA is beginning to prepare for the challenges that lie ahead. Future manned missions will require a symbiosis of human and robotic infrastructure. As a step towards understanding the roles of humans and robots in future planetary exploration, NASA headquarters funded ILC Dover and the University of Maryland to perform research in the area of human and robotic interfaces. The research focused on development and testing of communication components, robotic command and control interfaces, electronic displays, EVA navigation software and hardware, and EVA lighting. The funded research was a 12-month effort culminating in a field test with NASA personnel.

The University of Maryland FutureTruck Team has redesigned a 2002 Ford Explorer to function as a charge-sustaining parallel hybrid electric vehicle for the 2002-2003 FutureTruck competition. Dubbed the Excite, it is powered by a dedicated E85 3.0L V6 engine coupled to a 21.6 kW peak (10kW continuous), electric motor using a 144V NiMH battery pack. The philosophy behind the UMD plan is to use a smaller, lightweight, dedicated E85 engine in parallel with an electric motor to provide starting and mild assist capabilities. The engine provides similar power to the stock 4.0 L Explorer engine and the electric motor functions as a starter, an alternator, and assists the engine during high power demands. The combination of the two systems provides the Excite with engine-off-at-idle capability, increased efficiency and fuel economy, and decreased emissions while maintaining the utility of a stock SUV.

The University of Maryland team converted a model year 2000 Chevrolet Suburban to an ethanol-fueled hybrid-electric vehicle (HEV) and tied for first place overall in the 2000 FutureTruck competition. Competition goals include a two-thirds reduction of greenhouse gas (GHG) emissions, a reduction of exhaust emissions to meet California ultra-low emissions vehicle (ULEV) Tier II standards, and an increase in fuel economy. These goals must be met without compromising the performance, amenities, safety, or ease of manufacture of the stock Suburban. The University of Maryland FutureTruck, Proteus, addresses the competition goals with a powertrain consisting of a General Motors 3.8-L V6 engine, a 75-kW (100 hp) SatCon electric motor, and a 336-V battery pack. Additionally, Proteus incorporates several emissions-reducing and energy-saving modifications; an advanced control strategy that is implemented through use of an on-board computer and an innovative hybrid-electric drive train.

The potential for thermoelectric power generation via waste heat recovery onboard automobiles to displace alternators and/or provide additional charging to a hybrid vehicle battery pack has increased with recent advances in thermoelectric materials processing. A preliminary design/modeling study was performed to optimize waste heat recovery for power generation using a modified radiator incorporating thermoelectric modules. The optimization incorporates not only thermoelectric performance but also critical systems issues such as accessory power consumption, vehicle drag, and added system weight. Results indicate the effectiveness of the thermoelectric module is extremely sensitive to ambient heat rejection and to the operating temperature range of the thermoelectric device.

The Ranger Telerobotic Shuttle Experiment (RTSX) is a Space Shuttle-based flight experiment to demonstrate key telerobotic technologies for servicing assets in Earth orbit. The flight system will be teleoperated from onboard the Space Shuttle and from a ground control station at the NASA Johnson Space Center. The robot, along with supporting equipment and task elements, will be located in the Shuttle payload bay. A number of relevant servicing operations will be performed-including extravehicular activity (EVA) worksite setup, orbital replaceable unit (ORU) exchange, and other dexterous tasks. The program is underway toward an anticipated launch date in CY2002. This paper gives an overview of the RTSX mission, and describes several follow-on mission scenarios involving cooperative Ranger and EVA activities.

The Maryland Advanced Research/Simulation (MARS) Suit is designed to be a low-cost test bed for extravehicular activity (EVA) research, providing an environment for the development and application of biomedical sensors and advanced EVA technologies. It is also designed to be used in gaining more experience with human-telerobotic interactions in an integrated EVA worksite. This paper details the first generation MARS Suit (MX-1) design, describes the low-cost development process, and presents results from ongoing suit testing, as well as plans for future work.

While robotics have been employed in many environments, their use in space has been limited by high development costs and reliability issues. Using new management strategies and reduced mission life, the University of Maryland and NASA are developing the Ranger Telerobotic Flight Experiment (TFX), scheduled for flight in early 1997. This mission poses unique requirements on the design and implementation of the ground control station and it's interfaces. Two of the most important design issues are the need for high bandwidth command data, and cost constraints on the operator interface. This paper is intended to briefly outline the Ranger TFX mission, related theory on human perception, capabilities the control station must supply to vehicle designers sot that they can design effective control station interfaces, results from a preliminary study, and suggestions for future research.

A newly designed and built Mobile Tire Testing Machine (MTTM) is described that has features for large and continuously variable camber and steering angles with minimum tire scrub. This equipment was used to examine tire properties for six passenger car tires. Of special interest were the tire characteristics at combinations of high slip and camber angle. It was found that camber stiffness decreases with increasing slip angle when the slip and camber angles are both positive, and at limit conditions in slip angle, cambering a tire has little effect on the lateral side force produced. When the slip angle is negative, and the camber angle is positive, preliminary data shows that a greater lateral force is produced when compared to operating at limit conditions in slip angle alone.

The Pride of Maryland is a single seat solar powered trans-continental race car designed and built by engineering students at the University of Maryland. The car competed in G.M. Sunrayce USA, placing third, and has gone on to compete in the World Solar Challenge. This paper outlines the three general areas of design and development for the solar vehicle: aerodynamic, electrical, and mechanical. An exercise in high efficiency, the Pride of Maryland has been extremely successful as both a race car and as an educational tool for training student engineers in “real world” problems.