Search Results

Back to the non Flex Fuel vehicles, the knock control system was designed and calibrated to absorb differences between engines (mainly compression ratio) and to protect the engine against knock damage (a correction up to 4 degrees BTDC was usually enough). But now, two new variables get in the scene: Flexible Fuel strategy, working from E22 to E100 (all blends in between) and small displacement (1.0 liter) high compression ratio engines. In this new scenario the system must be capable of correcting all spark advance differences, once knock control system acts as a safety feature, protecting the engine even if the fuel learning shows some deviation. In addition to that, we have the compression ratio variation between minimum and maximum limits. Since the engine is small (as well its combustion chamber), each tenth of a millimeter difference during manufacturing process, results in an important final compression ratio variation.

Two combined four-bar mechanisms have two functions: lift and collapse. In the current design, high effort was found for the collapse function. Axiomatic Design was used to analyze and optimize the current design. The customer domain was mapped into the functional domain by specifying customer needs in terms of functional requirements (FRs) and constraints (Cs). Design parameters (DPs) were identified in the physical domain for each functional requirement. Design matrices were then defined to characterize the product design. The two combined four-bar mechanisms have two functional requirements at the highest level: lift and collapse. The corresponding DPs are: lift four-bar linkage and collapse four-bar linkage. Through zigzagging to decompose to the next level, the design was found to be coupled. At this level, a torsion spring was selected as the DP for minimizing the lift effort.

In the engine management systems field, there is lack of sensors locally built and available for sale in Brazil. Therefore, many auto parts companies have to import them affecting directly the final products costs (technology know-how/development costs, import taxes and other material handling/custom related costs). This paper was motivated to study an alternative for a simple, cheaper and locally made throttle position sensor. The choose of this part was because the fact that it is one of the most expensive in the throttle body bill of. For developing this new alternative, it was used a tool called value analysis and value engineering. The outcome of this study was a throttle position sensor function integrated to the throttle body manufacturing line with the advantages that 100% components can be locally purchased, improved robustness against humidity and component quantity reduction by 40%. Therefore achieving more value added.

It is the overall objective in the development of automotive climate control systems to guarantee a subjective feeling of thermal comfort for each passenger. The fulfillment of all physical specification parameters of a HVAC unit, such as airflow, temperature, etc., does not automatically achieve this goal. Engineers need to ensure that the consequences of the HVAC design lead to the desired demands inside the passenger compartment. In this paper a method will be presented that enables a time dependent detailed prediction of personal thermal comfort for each passenger in standard cooldown or warm-up tests. In addition to calculating overall comfort ratings for each passenger, transient local body segment comfort ratings can be calculated to determine local variations in comfort. It is therefore possible to discover reasons for potential discomfort in a much more detailed way. To accomplish this, mannequins are added to the CFD model of the cabin.

The analysis of airflow in an automotive HVAC cowl box is complicated by the cross sectional variations and abrupt changes in airflow direction. In this study, the complex three-dimensional turbulent flow found in a generic road vehicle cowl box is investigated experimentally and computationally. An optical anemometer is used to acquire the experimental data within a white metal sheet of a cowl box. The results are then used to validate and tune a Computational Fluid Dynamics (CFD) numerical cowl model.

The penetration of rainwater through the heating ventilation and air conditioning system (HVAC) of a vehicle directly affects the provision of thermal comfort within the vehicle passenger compartment. Present vehicle designs restrict considerably the air-management processes due to reduced space and tighter packaging. The motivation for the study is to get an insight into factors affecting the water ingress phenomenon when a stationary vehicle is subjected to water loading such as heavy rain when parked or waiting in a traffic light or when in a car wash. The test programme made use of a compact closed circuit full-scale automotive climatic wind tunnel that is able to simulate wind, rain and road inclination. The tunnel was developed as part of the collaborative research between the Flow Diagnostics Laboratory (FDL) of the University of Nottingham and Visteon Climate Control Systems [1].

The analysis of airflow in an automotive HVAC cowl box is complicated by the cross sectional variations and abrupt changes in airflow direction. In this study, the complex three-dimensional turbulent flow found in a generic road vehicle cowl box is investigated experimentally and computationally. An optical anemometer is used to acquire the experimental data within a white metal sheet of a cowl box. The results are then used to validate and tune a Computational Fluid Dynamics (CFD) numerical cowl model.

The drive to reduce weight, simplify assembly, and cut total system cost in today's vehicles is relentless. Replacing metal systems with thermoplastics has been of considerable interest in the engineering community. The current generations of engineering thermoplastic resins are enabling the use of plastic systems in demanding underhood applications. Technical data and discussion regarding the materials, design, molding, and assembly of lightweight composite throttle bodies will be presented in this paper. Comparisons with machined aluminum throttle housings are drawn to establish a baseline with the throttle body housing component that is most common in production today. Design flexibility and process simplification are some of the approaches highlighted. Much of the technical information provided in the paper applies to both cable driven mechanical throttle bodies as well as electronic throttle bodies under development.

For the past decade or so, automotive entertainment subsystem architectures have consisted of a simple Human Machine Interface (HMI), AM-FM tuner, a tape deck, an amplifier and a set of speakers. Over time, as customer demand for more entertainment features increased, automotive entertainment integrators made room for new features by allowing for the vertical integration of analog audio and adding a digital control. The new digital control came to entertainment subsystems via a low-speed multiplexing scheme embedded into the entertainment subsystem components, allowing remote control of these new features. New features were typically incorporated into the entertainment subsystem by independently packaging functional modules. Examples of these modules are cellular telephone, Compact Disc Jockey (CDJ), rear-seat entertainment, Satellite Digital Audio Radio System (S-DARS) receiver, voice and navigation with its associated display and hardware.

High-dilution stratified EGR combustion system operating at stoichiometric air-fuel ratio (A/F) could offer significant fuel economy saving comparable to the lean burn or stratified charge direct injection SI engines, while still complies with stringent emission standards by using the conventional three-way catalytic converter. The most critical challenge is to keep substantial separation between EGR gas and air-fuel mixture, or to minimize the mixing between these two zones to an acceptable level for stable and complete combustion. Swirl-type stratified EGR and air-fuel flow structure is considered desirable for this purpose, because the circular engine cylinder tends to preserve the swirl motion and the axial piston movement has minimal effect on the flow structure swirling about the same axis. In this study, KIVA3V was used to simulate mixing and combustion processes in a typical pent-roof gasoline engine cylinder during compression and expansion strokes.

A closed loop full-scale automotive climatic wind tunnel is described. The tunnel simulates wind and rain as well as several road conditions. It generates under controlled heat loading, wind speeds of up to 50kmh with different approach boundary conditions, rains from drizzle to cloudburst and road inclines up to 15° in any direction. The design and optimization process of the tunnel functions is outlined and examples of its use in vehicle development are given. The size constraint and the need for a compact design are important features of the tunnel. The tunnel provides an important test bed for close scrutiny of the relationship between rain ingress, vehicle speed, road condition, heat loading and vehicle geometry. The tunnel can also be used to study vehicle thermal management, vehicle thermal comfort, engine cold starting, and wipers efficiency in sever cold weather.

An accelerated seat durability test was developed to identify potential problems in areas with traditionally high warranty cost and customer dissatisfaction: squeak & rattle and mechanism looseness & efforts. The test inputs include temperature, humidity, road vibration, occupant movements, and mechanism cycling. These inputs were combined into a single 14-day test profile that simulates 10 years and 250,000 km. (approximately 150,000 miles) of 95th percentile customer usage. Various components of the seat assembly are tested together as a system. The test was performed on two current production programs. The test produced issues similar to those found in warranty repair data and evaluations of used seats from high-mileage customer-owned vehicles.

A low-pressure CO2-based climate-control system has the environmental benefits of CO2 refrigerant but avoids the extremely high pressures of the transcritical CO2 cycle. In the new cycle, a liquid “cofluid” is circulated in tandem with the CO2, with absorption and desorption of CO2 from solution replacing condensation/gas cooling and evaporation of pure CO2. This work compares the theoretical performance of the cycle using two candidate cofluids: N-methyl-2-pyrrolidone and acetone. The optimal coefficient of performance (COP) and refrigeration capacity are discussed in terms of characteristics of the CO2-cofluid mixture. Thermodynamic functions are determined either from an activity coefficient model or using the Soave equation of state, with close agreement between the two approaches. Reductions in COP due to nonideal compressor and heat exchangers are also estimated.

Environmental concerns have spawned renewed interest in naturally occurring refrigerants such as carbon dioxide. CO2 has attractive features such as high enthalpy of evaporation and low cost compared to halocarbons. However, the vapor pressure of CO2 is high at temperatures normally encountered in refrigeration and air conditioning systems when compared to traditional and alternative refrigerants such as CFC-12 and HFC-134a. Major research efforts are underway to investigate the transcritical CO2 cycle, in which a gas cooler instead of a condenser accomplishes heat rejection to ambient, since carbon dioxide in this cycle is above the critical point. The vapor pressure in the gas cooler may exceed 120 bar (1,740 lb/in2). In this paper a reduced pressure carbon dioxide system is revisited1, 2. The working fluid is a mixture of CO2 and a non-volatile liquid, referred to as a co-fluid, in which CO2 is highly soluble and readily absorbed and desorbed.

Pressures to increase the recyclable and recycled content of passenger vehicles are accelerating. In Europe, there is interest in eliminating halogenated polymers. Globally, more and more concern is focused on materials and methods that are ecologically friendly. Automakers and their suppliers are being encouraged to design and assemble components in new ways to facilitate separation, identification, and resource recovery at the end of the vehicle’s useful life - something that is not only good for the environment, but also the bottom line. One area of the vehicle that has proved challenging for applying such design for disassembly and recycling (DFD/R) principles has been the interior, owing to the sheer number of materials used there, and the great number of laminate structures that make disassembly nearly impossible. A good example is a door panel inner, which typically consists of a rigid plastic substrate, a foam pad, and a vinyl, leather, or cloth covering.

A building-block method, often used for simulating automotive systems, is described in this paper for simulating a driveline system. In the method, a driveline supplier's design responsible components are modeled with explicit FE models. Model accuracy is verified by testing and correlating the components in a free-free condition. Non-design responsible components are modeled using lumped parameters and/or modal models. These components and the validated design responsible components are integrated into a system model and connected using simple lumped parameter connections. Correlation at the system level is performed by making adjustments to the connection parameters and to the parameters of the non-design responsible components. The resulting system model has been used to accurately predict operating responses in a driveline system.

A design framework based on the principles of lean manufacturing and axiomatic design was used as a guideline for designing an automotive component manufacturing system. A brief overview of this design decomposition is given to review its structure and usefulness. Examples are examined to demonstrate how this design framework was applied to the design of a gear manufacturing system. These examples demonstrate the impact that low-level design decisions can have on high-level system objectives and the need for a systems-thinking approach in manufacturing system design. Results are presented to show the estimated performance improvements resulting from the new system design.

Plastics manufacturing technology is rapidly changing. The use of process simulation to increase competitiveness has proliferated. Visteon Automotive Systems is committed to developing competent workforce and niche capabilities in plastics processing simulation. In this paper the current capabilities and future development plan for plastic process simulation are discussed. An integrated concurrent engineering process has been developed and implemented to deliver high quality robust plastics automotive products and systems. This paper highlights the technological advancements achieved by Visteon in the field of analytical simulation of common manufacturing processes. In addition, future development initiatives towards the technical competency in plastics manufacturing simulation are discussed throughout the manuscript.

In a joint effort between Ford Motor Company, Visteon Automotive Systems, Textron Automotive Company, and Dow Automotive the 1999 Mercury Cougar instrument panel (IP) was designed and engineered to reduce the weight and overall cost of the IP system. The original IP architecture changed from a traditional design that relied heavily upon the steel structure to absorb and dissipate unbelted occupant energy during frontal collisions to a hybrid design that utilizes both plastic and steel to manage energy. This design approach further reduced IP system weight by 1.88 Kg and yielded significant system cost savings. The hybrid instrument panel architecture in the Cougar utilizes a steel cross car beam coupled to steel energy absorbing brackets and a ductile thermoplastic substrate. The glove box assembly and the driver knee bolster are double shell injection molded structures that incorporate molded-in ribs for added stiffness.

The work described in this paper was carried out on a specialist engine dynamometer which allows accurate simulation of in-vehicle conditions. This is achieved by the use of a clutch between the engine and dynamometer which allows realistic simulation of gearchanges. The presence of a clutch means that the dynamometer has two distinct modes of operation, corresponding to a engaged or disengaged clutch. This paper describes the design of a speed control scheme, providing bumpless transfer between two controllers, which has been developed to satisfy the differing control requirements of disengaged and engaged operation. Brief discussion of the controllers and bumpless transfer scheme is followed by presentation of test results. Finally, the performance of this scheme is compared with that of an existing hardware controller.