Search Results

Standard

Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels

2023-08-14

CURRENT

AMS3379A

This specification establishes the requirements for a polysulfide sealing compound in putty consistency to be used for form-in-place sealing of removable doors, skins, and panels.

Standard

Standard Requirements for Aerospace Sealants and Adhesion Promoters

2022-11-14

CURRENT

AS5502E

This SAE Aerospace Standard (AS) establishes standard requirements for aerospace sealants and adhesion promoters, which may be incorporated as part of SAE Aerospace Material Specifications (AMS) for such products. This document provides for commonality of methods and procedures for responsibility for inspection, source inspection, classification of tests, establishment of/and qualification to qualified products lists, approval, reports, resampling and retesting, packaging, and marking.

Standard

Release Agent, for Use During Form-in-Place Gasket Preparation

2021-12-15

CURRENT

AMS3092B

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Standard

Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant

2021-06-01

CURRENT

AMS3376D

This specification covers a permanently mastic, non-curing fluorosilicone sealing compound in the form of a paste.

Standard

Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone

2021-03-05

CURRENT

AS81550B

This specification covers the requirements for two types of a two-part, transparent, reversion resistant flexible insulating compound, to provide resilient, environmental, and electrical insulation of components in systems in temperature range -85 to 392 °F (-65 to 200 °C). These insulating compounds are intended for embedding, potting or encapsulation of electrical and electronic components in systems where tear resistance is not critical, but their use is not limited to such applications. These transparent compounds allow visual circuit and part identification and facilitate part replacement and repairs. The insulating compound shall cure in sections of unlimited thickness, either exposed to air or completely sealed.

Standard

Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)

2020-09-09

CURRENT

AMS3265F

This specification covers polysulfide rubber sealing compounds containing only non-chromated corrosion inhibitors, supplied as a two-component system which cures at room temperature.

Standard

Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa·s) Viscosity

2016-10-10

CURRENT

AMS3359C

This specification covers a room-temperature-vulcanizing, elastomeric silicone compound.

Standard

Release Agent, for Use During Form-In-Place Gasket Preparation

2015-12-02

HISTORICAL

AMS3092A

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Standard

Silicone Resin, Elastomeric, Transparent Room Temperature Cure

2012-01-17

CURRENT

AMS3370B

This specification covers a silicone resin in the form of a two-component liquid.

Standard

Aerodynamic Fairing Compound −55° to +85°C (−65° to +185°F)

2012-01-17

CURRENT

AMS3696C

This specification covers a two-component air-curing, aluminum-powder-filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife.

Standard

Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 - 45

2012-01-17

CURRENT

AMS3363E

This specification covers a silicone rubber in the form of a two-component liquid compound.

Standard

Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure

2012-01-17

CURRENT

AMS3368B

This specification covers a silicone rubber in the form of a two-component liquid.

Standard

Silicone Rubber Compound Room Temperature Vulcanizing, 55,000 Centipoise Viscosity Durometer 55 - 70

2012-01-17

CURRENT

AMS3366C

Standard

Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure

2012-01-17

CURRENT

AMS3372B

This specification covers a silicone resin in the form of a two-component liquid.

Standard

Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure

2012-01-17

CURRENT

AMS3373/2B

This specification covers an elastomeric silicone insulating and sealing compound, supplied as a two-component system. The compound may be either an addition- or a condensation-cure type.

Standard

Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure

2012-01-17

CURRENT

AMS3373/1B

This specification covers an elastomeric silicone insulating and sealing compound, supplied as a two-component system. The compound may be either an addition- or a condensation-cure type.

Standard

Aerodynamic Fairing Compound −55° to +150°C (−65° to +300°F)

2012-01-17

CURRENT

AMS3697C

This specification covers a two-component air-curing, aluminum-powder-filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife.

Standard

COMPOUND, SILICONE RUBBER, INSULATING AND SEALING 35 - 55

2011-08-09

HISTORICAL

AMS3373A

This specification and its supplementary detail specifications cover elastomeric silicone insulating and sealing compounds supplied as two-component systems which cure at room temperature.

Standard

SEALING COMPOUND, ONE-PART SILICONE Aircraft Firewall

2011-08-09

HISTORICAL

AMS3374

This specification covers a one-part, high-temperature-resistant silicone sealing compound which cures to an elastomeric material upon exposure to air and is furnished in cartridges ready for extrusion. Acid is not given off during cure. A primer is required to achieve maximum adhesion.

Standard

Silicone Resin, Elastomeric, Opaque, Room Temperature Cure

2009-06-16

CURRENT

AMS3371A

This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been "CANCELLED". Cancelled specifications are available from SAE.