Refine Your Search

Date

Date

Topic

Topic

Aircraft operations Vehicles, Equipment, and Performance Body regions Maintenance and Aftermarket Two or three wheeled vehicles Airlines Electronic Engineering Committee

Search Results

Viewing 1 to 20 of 92
123Next >Last >>
Sort by published
Standard

AIRCRAFT SERVER, COMMUNICATIONS, AND INTERFACE STANDARD
2021-11-10
CURRENT
ARINC679
ARINC Report 679 defines the functional characteristics of an airborne server that will support Electronic Flight Bags (EFBs) and similar peripherals used in the flight deck, cabin, and maintenance applications. The document defines how EFBs will efficiently, effectively, safely, and securely connect to the airborne server in a way that offer expanded capabilities to aircraft operators. The airborne server has two main functions, first to provide specific services to connected systems, and second to provide centralized security for the EFB and its data. This document is a functional airborne server definition. It does not define the physical characteristics of the server.
Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS
2021-09-10
CURRENT
ARINC812AP1-2
The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.
Standard

TIMELY RECOVERY OF FLIGHT DATA (TRFD)
2021-08-06
CURRENT
ARINC681
The difficulty in locating crash sites has prompted international efforts for alternatives to quickly recover flight data. This document describes the technical requirements and architectural options for the Timely Recovery of Flight Data (TRFD) in commercial aircraft. ICAO and individual Civil Aviation Authorities (CAAs) levy these requirements. The ICAO Standards and Recommended Practices (SARPs) and CAA regulations cover both aircraft-level and on-ground systems. This report also documents additional system-level requirements derived from the evaluation of ICAO, CAA, and relevant industry documents and potential TRFD system architectures. It describes two TRFD architectures in the context of a common architectural framework and identifies requirements. This report also discusses implementation recommendations from an airplane-level perspective.
Standard

INTERSYSTEM NETWORK INTEGRATION
2021-06-24
CURRENT
ARINC688
The purpose of this document is to provide guidelines for integrating previously standalone cabin systems such as cabin management systems, In-Flight Entertainment (IFE) systems, In-Flight Connectivity (IFC) systems, galley systems, surveillance systems, etc. Resource sharing between systems can reduce airline costs and/or increase functionality. But, as systems expose their internal resources to external systems, the risk of an intrusion that could degrade function and/or negatively expose the supplier’s or airline’s brand increases. This document provides a recommended IP networking design framework between aircraft systems to reduce the operational security threats while still supporting the necessary intersystem routing.
Standard

CABIN EQUIPMENT INTERFACES PART 5 CABIN ELECTRICAL EQUIPMENT AND WIRING INSTALLATION GUIDELINES
2020-07-24
CURRENT
ARINC628P5-4
ARINC Specification 628, Cabin Equipment Interfaces (CEI) Part 5 Parts Selection, Wire Design and Installation Guidelines, provides design and mounting guidelines for electrical installations, mainly for supplier of cabin furnishing equipment. Part 5 addresses several aspects of installation and is divided into five sections: Introduction, Parts Selection, Electrical Wire Design Guidelines, Wire Installation Guidelines, and Documentation Guidelines. Guidelines regarding design, safety, and other subjects relevant to acceptance of the end item are addressed. Notes explaining the reason for setting a guideline or suggesting methods for performing the task are provided in commentary. The content of the document is designed to make it usable for reference by industry, particularly manufacturers of seats and equipment.
Standard

AIRCRAFT DATA INTERFACE FUNCTION (ADIF)
2020-07-21
CURRENT
ARINC834-8
This document defines an Aircraft Data Interface Function (ADIF) developed for aircraft installations that incorporate network components based on commercially available technologies. This document defines a set of protocols and services for the exchange of aircraft avionics data across aircraft networks. A common set of services that may be used to access specific avionics parameters are described. The ADIF may be implemented as a generic network service, or it may be implemented as a dedicated service within an ARINC 759 Aircraft Interface Devices (AID) such as those used with an Electronic Flight Bag (EFB). Supplement 8 includes improvements in the Aviation Data Broadcast Protocol (ADBP), adds support for the Media Independent Aircraft Messaging (MIAM) protocol, and contains data security enhancements. It also includes notification and deprecation of the Generic Aircraft Parameter Service (GAPS) protocol that will be deleted in a future supplement.
Standard

CABIN EQUIPMENT INTERFACES PART 2 PHYSICAL LAYER - IN-SEAT PROTOCOL
2020-06-30
CURRENT
ARINC485P2-5
ARINC Specification 485, Part 2 specifies the ARINC 485-control protocol used by the LRUs described in ARINC Specification 628 Part 2. This document defines a multi-drop bus. The point-to-point configuration is also supported. The point-to-point bus is treated simply as a multi-drop bus with only one drop. There is one master LRU and one or more slave LRUs present on the bus. However; multiple buses may be connected in parallel, where each parallel bus operates independently from each other.
Standard

CABIN EQUIPMENT NETWORK BUS
2020-06-19
CURRENT
ARINC854
This standard defines a new cabin network bus. While ARINC Specification 485: Cabin Equipment Interfaces, Part 2, Physical Layer – In-seat Protocol defined a low-speed serial communications interface between electronic equipment in the passenger seat, it is design-focused on obtaining status from in-seat electronic equipment. ARINC Specification 854 is a messaging protocol but does not preclude using the bus for video streaming or multicast. Cabin Equipment has evolved from the very simple to quite sophisticated systems. The resulting communications needs have surpassed the ability of ARINC 485 to provide the necessary data capacity and response times. The basic requirements for low latency, full duplex, elimination of ARINC 485 Master/Slave polling and lower weight drives the selection of 100BASE-T1 (per IEEE 802.3) as the preferred bus format.
Standard

AVIATION SATELLITE COMMUNICATION SYSTEMS PART 1 AIRCRAFT INSTALLATION PROVISIONS
2019-12-23
CURRENT
ARINC741P1-15
This ARINC Standard defines the installation characteristics of first generation L-band satellite communication systems. It provides the traditional form, fit, function, and interfaces for the installation of satcom equipment for use in all types of aircraft. Description of avionics equipment (e.g., Satellite Data Unit (SDU), Antennas, etc.) are included. Supplement 15 adds references to new Diplexer/Low Noise Amplifiers (DLNAs) defined in Supplement 8 to ARINC Characteristic 781: Mark 3 Aviation Satellite Communication Systems. The five new DLNAs are intended to protect Inmarsat Classic Aero and SwiftBroadband (SBB) satcom equipment from ground-based cellular sources, such as cellular Long Term Evolution (LTE) and Ancillary Terrestrial Component (ATCt). The DLNAs are categorized by desired features and service (e.g., new DLNA versus drop-in replacement, LTE and/or ATCt protection, Classic Aero and/or SBB service).
Standard

SECOND GENERATION AVIATION SATELLITE COMMUNICATION SYSTEMS, AIRCRAFT INSTALLATION PROVISIONS
2019-12-23
CURRENT
ARINC761-6
This ARINC Standard defines the installation characteristics of second generation L-band satellite communication systems. It provides the traditional form, fit, function, and interfaces for the installation of satcom equipment for use in all types of aircraft. Description of avionics equipment (e.g., Satellite Data Unit (SDU), Antennas, etc.) are included. Supplement 6 adds references to new Diplexer/Low Noise Amplifiers (DLNAs) defined in Supplement 8 to ARINC Characteristic 781: Mark 3 Aviation Satellite Communication Systems. The five new DLNAs are intended to protect Inmarsat Classic Aero and SwiftBroadband (SBB) satcom equipment from ground-based cellular sources, such as cellular Long Term Evolution (LTE) and Ancillary Terrestrial Component (ATCt). The DLNAs are categorized by desired features and service (e.g., new DLNA versus drop-in replacement, LTE and/or ATCt protection, Classic Aero and/or SBB service).
Standard

MARK I AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM PART 1 PHYSICAL INSTALLATION AND AIRCRAFT INTERFACES
2019-09-19
CURRENT
ARINC791P1-3
This standard sets forth the desired characteristics of Aviation Ku-band Satellite Communication (Satcom) and Ka-band Satcom Systems intended for installation in all types of commercial air transport aircraft. The intent of this characteristic is to provide guidance on the interfaces, form, fit, and function of the systems. This document also describes the desired operational capability of the equipment needed to provide a broadband transport link that can be used for data, video, and voice communications typically used for passenger communications and/or entertainment. The systems described in this characteristic are not qualified, at this writing, for aviation safety functions.
Standard

AIRCRAFT AUTONOMOUS DISTRESS TRACKING (ADT)
2019-08-26
CURRENT
ARINC680
This document describes the technical requirements, architectural options, and recommended interface standards to support an Autonomous Distress Tracking (ADT) System intended to meet global regulatory requirements for locating aircraft in distress situations and after an accident. This document is prepared in response to International Civil Aviation Organization (ICAO) and individual Civil Aviation Authorities (CAAs) initiatives.
Standard

AIRCRAFT SOFTWARE COMMON CONFIGURATION REPORTING
2019-08-13
CURRENT
ARINC843-1
This standard defines a common configuration report format that can be retrieved from an aircraft for use by ground tools and maintenance personnel. Reports will be generated in Extensible Markup Language (XML) format and structured as defined by this document. Several optional elements and attributes are defined to allow flexibility for a given report. This standard provides aircraft manufacturers, regulatory agencies, and airlines a format standard for aircraft configuration reporting, and facilitates automated comparison of configuration data reports (e.g., authorized versus as flying, etc.).
Standard

AIRCRAFT DATA NETWORK, PART 1, SYSTEMS CONCEPTS AND OVERVIEW
2019-06-20
CURRENT
ARINC664P1-2
The purpose of this document is to provide an overview of data networking standards recommended for use in commercial aircraft installations. These standards provide a means to adapt commercially defined networking standards to an aircraft environment. It refers to devices such as bridges, switches, routers and hubs and their use in an aircraft environment. This equipment, when installed in a network topology, can optimize data transfer and overall avionics performance.
Standard

FIBER OPTIC TRAINING REQUIREMENTS
2019-01-10
CURRENT
ARINC807-4
This document is based upon the SAE ARP5602 document, A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education. ARINC Report 807: Fiber Optic Training Requirements is a subset of the SAE ARP5602 document designed to meet the requirements of the commercial air transport industry. Certification to the SAE ARP5602 document fulfills the requirements of ARINC Report 807. This document defines recommended general practices for training requirements of aerospace fiber optic systems. It is the intention of this document to outline proven training practices and general standards of workmanship for technicians engaged in aerospace fiber optic manufacturing, installation, maintenance, and repair for the air transport industry. It is also recommended that management and purchasing personnel receive fundamental training to familiarize themselves with the requirements of aerospace fiber optics.
Standard

CABIN STANDARD ENCLOSURES
2018-11-20
CURRENT
ARINC836A
The purpose of this specification is to define standard cabin equipment enclosures and provisions for equipment attachment on monuments. This standard is intended to enable simpler installation and maintenance of cabin equipment, resulting in time and cost reduction.
Standard

FIBER OPTIC CABLES
2018-08-27
CURRENT
ARINC802-3
This specification covers the performance requirements, dimensions, quality assurance criteria, test procedures, and cable codification for fiber optic cables suitable for use on commercial aircraft.
Standard

FIBER OPTIC FERRULE MECHANICAL TRANSFER
2018-08-06
CURRENT
ARINC846
This specification covers the dimensions, performance, and quality assurance criteria for fiber optic MT contacts, including performance test requirements and procedures, suitable for use on commercial aircraft.
123Next >Last >>
X