Search Results

Standard

A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms

2022-11-02

HISTORICAL

J1078_202211

This analysis applies to crane types as covered by ASME B30.5.

Standard

Mobile Crane Working Area Definitions

2022-09-01

CURRENT

J1028_202209

This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting, clamshell, dragline, magnet, pile driver, or similar service.

Standard

Lifting Crane Sheave and Drum Sizes

2021-10-21

CURRENT

J881_202110

This SAE Standard covers minimum dimensional relationship for sheaves, drums, and wire rope for mobile, construction type lift cranes.

Standard

A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms

2020-01-15

HISTORICAL

J1078_202001

This analysis applies to crane types as covered by ASME B30.5.

Standard

Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment

2017-10-10

CURRENT

J1238_201710

The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14.

Standard

Rating Lift Cranes Operating on Platforms in the Ocean Environment

2017-10-10

CURRENT

J1366_201710

The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.

Standard

Crane Load Stability Test Code

2017-06-07

CURRENT

J765_201706

This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. It is not applicable to cranes wherein the capacity of the crane is based on factors other than stability.

Standard

Lifting Crane Sheave and Drum Sizes

2013-04-18

HISTORICAL

J881_201304

This SAE Standard covers minimum dimensional relationship for sheaves, drums, and wire rope for mobile, construction type lift cranes.

Standard

A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms

2007-11-16

HISTORICAL

J1078_200711

This analysis applies to crane types as covered by Power Crane and Shovel Association Standard Number Two, Mobile Hydraulic Crane Standards and ANSI B30.15; refer to 5.1.

Standard

Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment

2007-11-16

HISTORICAL

J1238_200711

The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14.

Standard

Rating Lift Cranes Operating on Platforms in the Ocean Environment

2007-11-16

HISTORICAL

J1366_200711

The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.

Standard

Rating Lift Cranes Operating on Platforms in the Ocean Environment

2000-06-29

HISTORICAL

J1366_200006

The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.

Standard

Crane and Cable Excavator Basic Operating Control Arrangements

1998-10-01

CURRENT

J983_199810

This SAE Recommended Practice applies to mobile, construction type, crane and cable excavator hand and foot controls. It should not be construed to limit the use of, or to apply to combination controls, automatic controls, or any other special operating control requirements.

Standard

Mobile Crane Working Area Definitions

1998-10-01

HISTORICAL

J1028_199810

This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.

Standard

Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment

1998-07-01

HISTORICAL

J1238_199807

The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14.

Standard

A RECOMMENDED METHOD OF ANALYTICALLY DETERMINING THE COMPETENCE OF HYDRAULIC TELESCOPIC CANTILEVERED CRANE BOOMS

1994-04-05

HISTORICAL

J1078_199404

This analysis applies to crane types as covered by Power Crane and Shovel Association Standard Number Two, Mobile Hydraulic Crane Standards and ANSI B30.15; refer to 5.1.

Standard

CRANE LOAD STABILITY TEST CODE

1990-10-01

HISTORICAL

J765_199010

This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. It is not applicable to cranes wherein the capacity of the crane is based on structural strength or available hoisting power.

Standard

MOBILE CRANE STABILITY RATINGS

1981-04-01

HISTORICAL

J1289_198104

This recommended practice applies to mobile, construction-type lifting cranes with either lattice booms or cantilevered, telescopic booms.

Standard

MOBILE CRANE WORKING AREA DEFINITIONS

1980-10-01

HISTORICAL

J1028_198010

This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.

Standard

MOBILE CRANE WORKING AREA DEFINITIONS

1980-08-01

HISTORICAL

J1028_198008

This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.