Search Results

Abstract After a severe lane change, a wind gust, or another disturbance, the driver might be unable to recover the intended motion. Even though this fact is known by any driver, the scientific investigation and testing on this phenomenon is just at its very beginning, as a literature review, focusing on SAE Mobilus® database, reveals. We have used different mathematical models of car and driver for the basic description of car motion after a disturbance. Theoretical topics such as nonlinear dynamics, bifurcations, and global stability analysis had to be tackled. Since accurate mathematical models of drivers are still unavailable, a couple of driving simulators have been used to assess human driving action. Classic unstable motions such as Hopf bifurcations were found. Such bifurcations seem almost disregarded by automotive engineers, but they are very well-known by mathematicians. Other classic unstable motions that have been found are “unstable limit cycles.”

Abstract Due to the presence of uncertain disturbances in the actual steering system, disturbances in the system may affect the handling stability of the vehicle. Therefore, this article proposes an integrated steering system control strategy with stronger anti-disturbance performance. When disturbances exist in the system, the proposed control strategy effectively reduces the attitude changes during the vehicle steering process. In the upper-level control strategy, a variable transmission ratio curve is designed to coordinate the high-speed handling stability and low-speed steering sensitivity of the vehicle. On this basis, a sideslip angle observer is proposed based on the extended state observation theory, which does not depend on an accurate system model, thus determining the intervention timing of the active front wheel steering system. In the lower-level control strategy, DR-PI/DR-PID controllers are designed for the integrated steering system.

Abstract A time domain analysis method of ride comfort and energy dissipation characteristics is proposed for automotive vibration proportional–integral–derivative (PID) control. A two-degrees-of-freedom single wheel model for automotive vibration control is established, and the conventional vibration response variables for ride comfort evaluation and the energy consumption vibration response variables for energy dissipation characteristics evaluation are determined, and the Routh stability criterion method was introduced to assess the impact of PID control on vehicle stability. The PID control parameters are tuned using the differential evolution algorithm, and to improve the algorithm’s adaptive ability, an adaptive operator is introduced, so that the mutation factor of differential evolution algorithm can change with the number of iterations.

Abstract An automatic collision avoidance control method integrating optimal four-wheel steering (4WS) and direct yaw-moment control (DYC) for autonomous vehicles on curved road is proposed in this study. Optimal four-wheel steering is used to track a predetermined trajectory, and DYC is adopted for vehicle stability. Two single lane change collision avoidance scenarios, i.e., a stationary obstacle in front and a moving obstacle at a lower speed in the same lane, are constructed to verify the proposed control method. The main contributions of this article include (1) a quintic polynomial lane change trajectory for collision avoidance on curved road is proposed and (2) four different kinds of control method for autonomous collision avoidance, namely 2WS, 2WS+DYC, 4WS, and 4WS+DYC, are compared. In the design of DYC controller, two different feedback control methods are adopted for comparison, i.e., sideslip angle feedback and yaw rate feedback.

Abstract In order to enhance the path-tracking accuracy and adaptability of the electric flatbed vehicle (EFV) in the soft-target vehicle test system, an improved controller is designed based on the linear quadratic regulator (LQR) algorithm. First, the LQR feedback controller is designed based on the EFV dynamics tracking error model, and the genetic algorithm is utilized to obtain the optimal weight coefficient matrix for different speeds. Second, a weight coefficient matrix compensation strategy is proposed to address the changes in the relationship between the vehicle–road position and attitude caused by external disturbances and the state of EFV. An offline parameter table is created to reduce the computational load on the microcontroller of EFV and enhance real-time path-tracking performance. Furthermore, an adaptive preview time control strategy is added to reduce the overshooting caused by control delay. This strategy is based on road curvature and traveling speed.

Abstract Accurate estimation of traction force is essential for the development of advanced control systems, particularly in the domain of autonomous driving. This study presents an innovative approach to enhance the estimation of tire–road interaction forces under combined slip conditions, employing a combination of empirical models and neural networks. Initially, the well-known Pacejka formula, or magic formula, was adopted to estimate tire–road interaction forces under pure longitudinal slip conditions. However, it was observed that this formula yielded unsatisfactory results under non-pure slip conditions, such as during curves. To address this challenge, a neural network architecture was developed to predict the estimation error associated with the Pacejka formula. Two distinct neural networks were developed. The first neural network employed, as inputs, both longitudinal slip ratios of the driving wheels and the slip angles of the driving wheels.

Abstract Vehicle-to-infrastructure (V2I) connectivity technology presents the opportunity for vehicles to perform autonomous longitudinal control to navigate safely and efficiently through sequences of V2I-enabled intersections, known as connected corridors. Existing research has proposed several control systems to navigate these corridors while minimizing energy consumption and travel time. This article analyzes and compares the simulated performance of three different autonomous navigation systems in connected corridors: a V2I-informed constant acceleration kinematic controller (V2I-K), a V2I-informed model predictive controller (V2I-MPC), and a V2I-informed reinforcement learning (V2I-RL) agent. A rules-based controller that does not use V2I information is implemented to simulate a human driver and is used as a baseline. The performance metrics analyzed are net energy consumption, travel time, and root-mean-square (RMS) acceleration.

Abstract In this article, we present a spatiotemporal trajectory planning algorithm for emergency obstacle avoidance. Utilizing obstacle and driving environment data from the sensing module, we construct a 3D spatiotemporal grid map. This informs our improved hybrid A* algorithm, which identifies collision-safe, dynamically feasible trajectories. The traditional hybrid A* algorithm is enhanced in three significant ways to make the search practical and feasible: (1) optimizing search efficiency with motion primitives based on child node acceleration, (2) integrating collision risk into the heuristic function to reduce ineffective node exploration, and (3) introducing a One-Shot search based on the Optimal Boundary Value Problem (OBVP) to improve goal state searches. Finally, the algorithm is tested in two scenarios: (1) a vehicle cut-in from an adjacent lane and (2) a pedestrian crossing.

Abstract Since the complexity of modern vehicles is increasing continuously, car manufacturers are forced to improve the efficiency of their development process to remain profitable. A frequently mentioned measure is the consequent integration of virtual methods. In this regard, objective evaluation criteria are essential for the virtual design of driving dynamics. Therefore, this article aims to identify robust objective evaluation criteria for the nonlinear combined longitudinal and lateral dynamics of a vehicle. The article focuses on the acceleration in a turn maneuver since available objective criteria do not consider all relevant characteristics of vehicle dynamics. For the identification of the objective criteria, a generic method is developed and applied. First, an open-loop test procedure and a set of potential robust objective criteria are defined.

Abstract The European Union’s pro-ecological policy imposes a requirement to use biofuel additives in diesel fuel which is supposed to support the sustainable development of transport and limit its negative impact on the natural environment. The study presents an analysis of the exhaust gas components and the amount of solid particles carried out for internal combustion engines fueled with mixtures of diesel fuel and fatty acid methyl esters. Additionally, the computer software of the tested power units was modified by changing the amount of fuel to be supplied and the air intake. The goal of the tests was to find out how the fuel mixture and reprogramming of the computer control systems would impact the emission of exhaust gas components. Based on the tests, it was found that an additive of fatty acid methyl esters to diesel does have an influence on the tested unit parameters.

Abstract The uncertainty of a driver’s state, the variability of the traffic environment, and the complexity of road conditions have made driving behavior a critical factor affecting traffic safety. Accurate predicting of driving behavior is therefore crucial for ensuring safe driving. In this research, an efficient framework, distilled routing transformer (DRTR), is proposed for driving behavior prediction using multiple modality data, i.e., front view video frames and vehicle signals. First, a cross-modal attention distiller is introduced, which distills the cross-modal attention knowledge of a fusion-encoder transformer to guide the training of our DRTR and learn deep interactions between different modalities. Second, since the multi-modal learning usually requires information from the macro view to the micro view, a self-attention (SA)-routing module is custom-designed for SA layers in DRTR for dynamic scheduling of global and local attentions for each input instance.

Abstract Adaptive neural networks (ANNs) have become famous for modeling and controlling dynamic systems. However, because of their failure to precisely reflect the intricate dynamics of the system, these have limited use in practical applications and perform poorly during training and testing. This research explores novel approaches to this issue, including modifying the simple neuron unit and developing a generalized neuron (GN). The revised version of the neuron unit helps to develop the system controller, which is responsible for providing the desired control signal based on the inputs received from the dynamic responses of the vehicle suspension system. The controller is then tested and evaluated based on the performance of the magnetorheological (MR) damper for the main suspension system.

Abstract For spacecraft with high power consumption, it is reasonable to build the thermal control system based on a two-phase mechanically pumped loop. The heat-controlled accumulator is a key element of the two-phase mechanically pumped loop, which allows for the control of pressure in the loop and maintains the required level of coolant boiling temperature or cavitation margin at the pump inlet. There can be two critical modes of loop operation where the ability to control pressure will be lost. The first critical mode occurs when the accumulator fills with liquid at high heat loads. The second critical mode occurs when the accumulator is at low heat loads and partial loss of coolant, for example, due to the leak caused by micrometeorite breakdown. Both modes are caused by insufficient accumulator volume or working fluid charge.

Abstract Pre-crash vehicle maneuvers are known to affect occupant posture and kinematics, which consequently may influence injury risks during a collision. In this study, the influence of pre-crash vehicle maneuvers on the injury risks of front-seated occupants during a frontal crash was numerically evaluated. A generic buck vehicle model was developed based on a publicly available FE model, which included the vehicle interior and the front passenger airbag (PAB). The pre-crash phase was simulated using specific rigid-body human models with active joints (GHBMCsi-pre models) developed based on exterior shapes of the simplified deformable human model (GHBMCsi) representing a 50th male subject. Two pre-crash maneuvers representing (1) a generic 1g braking and (2) turning-and-braking scenarios were simulated.

Abstract Letter from the Special Issue Editors

Abstract In autonomous driving vehicles with an automation level greater than three, the autonomous system is responsible for safe driving, instead of the human driver. Hence, the driving safety of autonomous driving vehicles must be ensured before they are used on the road. Because it is not realistic to evaluate all test conditions in real traffic, computer simulation methods can be used. Since driving safety performance can be evaluated by simulating different driving scenarios and calculating the criticality metrics that represent dangerous collision risks, it is necessary to study and define the criticality metrics for the type of driving scenarios. This study focused on the risk of collisions in the confluence area because it was known that the accident rate in the confluence area is much higher than on the main roadway.

Abstract Parking an articulated vehicle is a challenging task that requires skill, experience, and visibility from the driver. An automatic parking system for articulated vehicles can make this task easier and more efficient. This article proposes a novel method that finds an optimal path and controls the vehicle with an innovative method while considering its kinematics and environmental constraints and attempts to mathematically explain the behavior of a driver who can perform a complex scenario, called the articulated vehicle park maneuver, without falling into the jackknifing phenomena. In other words, the proposed method models how drivers park articulated vehicles in difficult situations, using different sub-scenarios and mathematical models.

Abstract The progressive development toward highly automated driving poses major challenges for the release and validation process in the automotive industry, because the immense number of test kilometers that have to be covered with the vehicle cannot be tackled to any extent with established test methods, which are highly focused on the real vehicle. For this reason, new methodologies are required. Simulation-based testing and, in particular, virtual driving tests will play an important role in this context. A basic prerequisite for achieving a significant reduction in the test effort with the real vehicle through these simulations are realistic test scenarios. For this reason, this article presents a novel approach for generating relevant traffic situations based on a traffic flow simulation in SUMO and a vehicle dynamics simulation in CarMaker. The procedure is shown schematically for an emergency braking function.

Abstract In the last decades we have witnessed an increasing number of military operations in urban environments. Complex urban operations require high standards of training, equipment, and personnel. Emergency forces on the ground will need specialized vehicles to support them in all parts and levels of this extremely demanding environment including the subterranean and interior of infrastructure. The development of vehicles for this environment has lagged but offers a high payoff. This article describes the method for developing a concept for an urban operations vehicle by characterization of the urban environment, deduction of key issues, evaluation of related prototyping, science fiction story-typing of the requirements for such a vehicle, and comparison with field-proven and scalable solutions. Embedding these thoughts into a comprehensive research and development program provides lines of development, setting the stage for further research.

Abstract A precise knowledge of the road profile ahead of the vehicle is required to successfully engage a proactive suspension control system. If this profile information is generated by preceding vehicles and stored on a server, the challenge that arises is to accurately determine one’s own position on the server profile. This article presents a localization method based on a particle filter that uses the profile observed by the vehicle to generate an estimated longitudinal position relative to the reference profile on the server. We tested the proposed algorithm on a quarter vehicle test rig using real sensor data and different road profiles originating from various types of roads. In these tests, a mean absolute position error of around 1 cm could be achieved. In addition, the algorithm proved to be robust against local disturbances, added noise, and inaccurate vehicle speed measurements.