Standard
Titanium Alloy Welding Wire, 5Al - 2.5Sn
2024-04-25
CURRENT
AMS4953J
This specification covers a titanium alloy in the form of welding wire (see 8.5).
Search Results
Standard
Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for
2024-04-24
CURRENT
MA3399A
This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.
Standard
BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)
2024-04-23
CURRENT
AS27646/1B
Standard
Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for
2024-04-23
CURRENT
AS7233A
This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.
Standard
Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For
2024-04-23
CURRENT
AS7234A
This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivets.
Standard
Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for
2024-04-23
CURRENT
AS7235A
This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.
Best Practice
AVSC Best Practice for First Responder Interactions with Fleet-Managed Automated Driving System-Dedicated Vehicles (ADS-DVs)
2024-04-04
CURRENT
AVSC-I-01-2024
This AVSC best practice was first published in 2020 and has been revised to cast expanded role definitions, rearrangement of use cases in Section 4 based on severity of risk, re-creation of Table 4 in 5.4 as a checklist and moved to Appendix B, as well as clarification of sections, examples, and terms throughout the document. This document outlines interactions between first responders and ADS-DVs (SAE level 4 and level 5). It builds on earlier work done by the Crash Avoidance Metrics Partners (CAMP), detailing three types of interactions first responders may encounter: direct, indirect, and informational. In addition, a standardized framework with recommendations for an interaction plan is laid out for ADS developers, manufacturers, and fleet operators which may assist first responders in both emergency and non-emergency situations involving ADS-DVs.
Standard
Nickel Wire and Ribbon 99Ni
2024-04-01
CURRENT
AMS5555G
This specification covers a nickel in the form of round wire and rectangular ribbon.
Standard
Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture
2024-04-01
CURRENT
AMS5792C
This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.
Standard
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for
2024-04-01
CURRENT
AS7210B
This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.
Standard
Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)
2024-04-01
CURRENT
AMS6299H
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
Standard
Spring Pins, Tubular, Carbon Steel, Procurement Specification for
2024-04-01
CURRENT
AS7205A
This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.
Standard
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
2024-04-01
CURRENT
AMS4344G
This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 inches (6.35 to 50.80 mm) in nominal thickness and up to 32 square inches (206 cm2), inclusive, in cross-sectional area (see 8.5).
Standard
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed
2024-04-01
CURRENT
AMS5627J
This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.
Standard
Aluminum Alloy, Extrusions and Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), Solution and Precipitation Heat Treated
2024-03-27
CURRENT
AMS4150P
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing, flash-welded rings fabricated from extruded stock, and stock for flash-welded rings (see 8.6).
Standard
CRIMPING TOOLS, TYPE 1, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, AND SMALLER
2024-03-22
CURRENT
AS22520/7A
Standard
ROD END - THREADED, AIRCRAFT
2024-03-22
CURRENT
AS49011C
Standard
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For
2024-03-22
CURRENT
AS4983A
This procurement specification covers tubular-shaped, coiled spring pins made of a corrosion resistant nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.
Standard
Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged
2024-03-22
CURRENT
AMS4157F
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).
Standard
JAUS Messaging over the OMG Data Distribution Service (DDS)
2024-03-18
CURRENT
ARP6227
This document defines a standard representation of JAUS AS5684A message data in DDS IDL defined by the Object Management Group (OMG) CORBA 3.2 specification. This document does NOT address how JAUS transport considerations or JAUS service protocols are implemented on OMG DDS platforms.
