Standard
Reaffirm E 2024 - spring
2024-05-13
WIP
REFIRM-E-S2024
The following document were been proposed by the sponsor or by committee E for Reaffirmation at the Spring meeting 2024.
Search Results
Standard
Reaffirmation Ballot - F 2024 Spring
2024-05-13
WIP
REFIRM-F-S2024
The following document has been proposed by the sponsor or by committee F for Reaffirmation at the Spring meeting 2024.
Standard
COUPLING, V-RETAINER, DOUBLE LATCH, TYPE II LOW PROFILE
2024-05-13
WIP
AS1895/20G
Scope is unavailable.
Standard
COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
2024-05-13
WIP
AS1895/1J
Scope is unavailable.
Standard
COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE
2024-05-13
WIP
AS1895/4J
Scope is unavailable.
Standard
COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
2024-05-13
WIP
AS1895/22G
Scope is unavailable.
Standard
Peening Media, Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC)
2024-05-13
WIP
AMS2431/3F
The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.
Standard
Peening Media, Conditioned Stainless Steel Cut Wire Shot (AWS)
2024-05-13
WIP
AMS2431/4E
The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.
Standard
Peening Media, Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)
2024-05-13
WIP
AMS2431/8D
This specification, in conjunction with the general requirements for peening media covered in AMS2431, establishes the requirements for the procurement of conditioned carbon steel cut wire shot with a hardness of 55 to 62 HRC.
Standard
Half Coupling Subassembly, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
2024-05-10
WIP
AS1713D
Scope unavailable.
Standard
Coupling Subassembly, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
2024-05-10
WIP
AS1712D
Scope unavailable.
Standard
Coupling, Flexible, Variable Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard
2024-05-10
WIP
AS1711C
No scope is available.
Standard
Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
2024-05-10
WIP
AMS3023D
This specification covers a trimethylol propane triheptanoate fluid (see 8.2) representative of standard type (SPC) gas turbine engine oils.
Standard
GAF24AF (GAE24AF) Tensile Test Strain Rate Implementation
2024-05-09
WIP
GAF24AF
Update of when to implement a specific strain rate into tensile testing.
Standard
Nickel Alloy, Corrosion- and Heat-Resistant Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750), Solution Heat Treated, Precipitation Hardenable
2024-05-09
CURRENT
AMS5582H
This specification covers a precipitation hardenable, corrosion- and heat-resistant nickel alloy in the form of seamless tubing 0.125 inch (3.18 mm) and over in nominal OD and 0.015 inch (0.38 mm) and over in nominal wall thickness.
Standard
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of
2024-05-09
CURRENT
ARP1947D
This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).
Standard
Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form
2024-05-09
CURRENT
AS7250E
This document covers all metal, self-locking wrenching nuts, plate nuts, shank nuts, and gang channel nuts made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 160 ksi tensile strength at room temperature, with maximum test temperature of parts at 1200 °F.
Standard
Nuts, Self-Locking, UNS N07001 730 °C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric
2024-05-09
CURRENT
MA1943C
This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) types of nuts made from a corrosion and heat-resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 1210 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 °C.
Standard
Recommended Method for the Testing of Impact Resistant Products on Cables
2024-05-09
CURRENT
J3350_202405
This SAE Standard describes the methods for testing flexible harness coverings for use on ground vehicle electrical distribution systems, specifically protection from severe mechanical impact. This SAE Standard shall apply to all tapes, extruded tubes, and textile sleeves used for this purpose.
Standard
Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized
2024-05-01
CURRENT
AMS4375N
This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.5).
