Search Results

Standard

Primer, Anodic Electrodeposition for Aircraft Applications

2024-05-01

WIP

AMS3144B

This specification establishes the requirements for a waterborne, corrosion inhibiting, chemical and solvent resistant, anodic electrodeposition epoxy primer capable of curing at 200 to 210 °F (93 to 99 °C).

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Application of AMS3144 Anodic Electrodeposition Primer

2024-05-01

WIP

G824AB

This standard establishes the recommended requirements for application of AMS3144 anodic electrodeposition primer to aerospace components. Adherence to these requirements will help facilitate satisfactory performance of the applied primer.

Standard

Coating System, Advanced Performance, for Exterior Aerospace Applications

2024-04-30

WIP

G824AA

This specification establishes the requirements for coating systems having high durability for use as aircraft exterior surface finishes. These coating systems normally are comprised of a surface treatment, a primer, and a topcoat and include a chemical stripper and a cleaning compound for topcoat washing.

Standard

Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T861 Sheet and Plate), Solution Heat Treated, 6% Cold Worked and Artificially Aged

2024-04-25

CURRENT

AMS4467C

This specification covers an aluminum alloy in the form of alclad sheet and plate supplied in the -T861 temper.

Standard

Aluminum Alloy, Coiled Sheet, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024; -T4 Coiled Sheet), Solution Heat Treated

2024-04-25

CURRENT

AMS4475C

This specification covers an aluminum alloy in the form of alclad coiled sheet from 0.010 to 0.128 inch (0.25 to 3.25 mm), inclusive, in thickness supplied in the -T4 temper (see 8.5).

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

Tape for Organic Coatings Adhesion Testing

2024-04-25

CURRENT

AMS3721A

This specification establishes requirements for a tape that is used to perform organic coatings adhesion testing.

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)

2024-04-23

CURRENT

AS27646/1B

Standard

Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for

2024-04-23

CURRENT

AS7233A

This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.

Standard

Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For

2024-04-23

CURRENT

AS7234A

This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivets.

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

Nickel Wire and Ribbon 99Ni

2024-04-01

CURRENT

AMS5555G

This specification covers a nickel in the form of round wire and rectangular ribbon.

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.

Standard

Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for

2024-04-01

CURRENT

AS7210B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.

Standard

Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)

2024-04-01

CURRENT

AMS6299H

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

Standard

Spring Pins, Tubular, Carbon Steel, Procurement Specification for

2024-04-01

CURRENT

AS7205A

This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.

Standard

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2024-04-01

CURRENT

AMS4344G

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 inches (6.35 to 50.80 mm) in nominal thickness and up to 32 square inches (206 cm2), inclusive, in cross-sectional area (see 8.5).

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed

2024-04-01

CURRENT

AMS5627J

This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.