Search Results

Standard

Nuts, Self-Locking, UNS N07001 730 °C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric

2024-05-09

CURRENT

MA1943C

This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) types of nuts made from a corrosion and heat-resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 1210 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 °C.

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2024-05-09

CURRENT

ARP1947D

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T861 Sheet and Plate), Solution Heat Treated, 6% Cold Worked and Artificially Aged

2024-04-25

CURRENT

AMS4467C

This specification covers an aluminum alloy in the form of alclad sheet and plate supplied in the -T861 temper.

Standard

Aluminum Alloy, Coiled Sheet, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024; -T4 Coiled Sheet), Solution Heat Treated

2024-04-25

CURRENT

AMS4475C

This specification covers an aluminum alloy in the form of alclad coiled sheet from 0.010 to 0.128 inch (0.25 to 3.25 mm), inclusive, in thickness supplied in the -T4 temper (see 8.5).

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)

2024-04-23

CURRENT

AS27646/1B

Standard

Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For

2024-04-23

CURRENT

AS7234A

This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivets.

Standard

NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN

2024-04-23

CURRENT

AS9881C

Standard

PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800

2024-04-23

CURRENT

AS9842B

Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 1: Terms and Definitions

2024-04-23

CURRENT

J3078/1_202404

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for

2024-04-23

CURRENT

AS7233A

This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.

Standard

Tire Burst Test Methodology

2024-04-17

CURRENT

ARP6265

This document describes a recommended test procedure to assess the burst characteristics of tires used on 14CFR Part 25 or similar transport airplanes.

Standard

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A

2024-04-10

CURRENT

AS3250D

Standard

NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 SILVER PLATED THREADS ONLY

2024-04-10

CURRENT

AS3625B

Standard

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .190-32 UNJF-3A

2024-04-10

CURRENT

AS9633B

Standard

Nickel Wire and Ribbon 99Ni

2024-04-01

CURRENT

AMS5555G

This specification covers a nickel in the form of round wire and rectangular ribbon.

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.