Search Results

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Copper, Sheet, Strip, and Plate, Soft Annealed

2024-05-01

WIP

AMS4500L

This specification covers unalloyed copper in the form of sheet, strip, and plate at least 0.015 inch (0.38 mm) in nominal thickness.

Standard

Sheet and Plate, Magnesium Alloy, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O), Annealed and Recrystallized

2024-05-01

WIP

AMS4375N

This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.5).

Standard

Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners

2024-05-01

CURRENT

AS87132A

This specification establishes the requirements for flake or granular cetyl alcohol, solvents for dissolving the cetyl alcohol, preparation and application requirements for use of cetyl alcohol as an installation lubricant on mechanical fasteners, such as pins, bolts, nuts, washers, threaded or nonthreaded fastening devices, and inspection criteria for coated parts.

Standard

Hose, Air Duct, Flexible Nonmetallic, Aircraft

2024-04-30

WIP

AS1501E

This document covers flexible and semiflexible, reinforced and unreinforced air hoses fabricated from laminated and impregnated fabric, intended for use in aircraft heating, air conditioning, ventilating, defrosting, and/or deicing systems.

Standard

Male Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Butt Welded

2024-04-30

WIP

AS4734D

No scope available.

Standard

FEMALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, SWAGED

2024-04-30

WIP

AS4735C

SCOPE IS UNAVAILABLE.

Standard

Coating System, Advanced Performance, for Exterior Aerospace Applications

2024-04-30

WIP

G824AA

This specification establishes the requirements for coating systems having high durability for use as aircraft exterior surface finishes. These coating systems normally are comprised of a surface treatment, a primer, and a topcoat and include a chemical stripper and a cleaning compound for topcoat washing.

Standard

Laser Powder Bed Fusion Produced Parts, Aluminum Alloy 7A50.60L (A7050-RAM2, composition similar to UNS A97050), Hot Isostatic Pressed and T74 Aged

2024-04-26

WIP

AMS7071

Material specification for parts produced using 7A50.60L (A7050-RAM2) using the laser powder bed fusion process

Standard

Steel, Corrosion Resistant Bars and Forgings, 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo, Vacuum Induction Plus, Vacuum Consumable Electrode Remelted

2024-04-26

WIP

AMS5933B

This specification covers a premium aircraft-quality corrosion-resistant steel in the form of bars, forgings, and forging stock.

Standard

F23AB/AMS5971 Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12.25Cr– 2.5Ni – 0.6Mo -- 0.45Ti (<0.13C), Carburizing Aircraft Premium Quality, VIM-VAR or VAR, 190ksi (Composition similar to UNS S41429)

2024-04-26

WIP

F23AB/AMS5971

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

F23AA/AMS5970 Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12.25Cr– 2.5Ni – 0.6Mo -- 0.45Ti (<0.13C), Carburizing Aircraft Premium Quality, VIM-VAR or VAR, 170ksi (Composition similar to UNS S41429)

2024-04-26

WIP

F23AA/AMS5970

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock

Standard

Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T861 Sheet and Plate), Solution Heat Treated, 6% Cold Worked and Artificially Aged

2024-04-25

CURRENT

AMS4467C

This specification covers an aluminum alloy in the form of alclad sheet and plate supplied in the -T861 temper.

Standard

Aluminum Alloy, Coiled Sheet, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024; -T4 Coiled Sheet), Solution Heat Treated

2024-04-25

CURRENT

AMS4475C

This specification covers an aluminum alloy in the form of alclad coiled sheet from 0.010 to 0.128 inch (0.25 to 3.25 mm), inclusive, in thickness supplied in the -T4 temper (see 8.5).

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

Plain Spherical Bearing Conformity Examination

2024-04-24

CURRENT

ARP5448/6A

This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification.

Standard

BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), . 3750-24, UNJF-3A

2024-04-24

CURRENT

AS3170B

Standard

BOLT, TEE HEAD - NICKEL ALLOY (UNS N07718), CHAMFERED, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)

2024-04-24

CURRENT

AS3411E

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)

2024-04-23

CURRENT

AS27646/1B