Standard
BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)
2024-04-23
CURRENT
AS27646/1B
Search Results
Standard
NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN
2024-04-23
CURRENT
AS9881C
Standard
Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for
2024-04-23
CURRENT
AS7235A
This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.
Standard
Fuel and Lubricant Tanks for Motorcycles
2024-04-15
CURRENT
J1241_202404
This SAE Recommended Practice is applicable to two- or three-wheel motorcycles intended for highway use. Unless noted, requirements apply to both metallic and nonmetallic tanks. Accessory or aftermarket tanks as well as original equipment tanks are covered.
Standard
RIVET, SOLID, 100° FLUSH HEAD, HIGH TEMPERATURE, 347 CRES, UNS S34700
2024-04-10
CURRENT
AS123451C
Standard
Rings, Retaining – Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
2024-04-10
CURRENT
AS4299B
This procurement specification covers retaining rings of the spiral wound type with uniform rectangular cross-section, made of a corrosion and heat resistant age hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286, work strengthened and heat treated to a tensile strength of 185 to 240 ksi at room temperature.
Standard
INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 2 DIA NOM LENGTH
2024-04-10
CURRENT
AS3081A
Standard
INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 3 DIA NOM LENGTH
2024-04-10
CURRENT
AS3083A
Standard
INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 1.5 DIA NOM LENGTH
2024-04-10
CURRENT
AS3080A
Standard
SCREW, MACHINE - HEXAGON HEAD, PD SHANK, CRES AMS5731 (UNS S66286), .164-36 UNJF-3A
2024-04-10
CURRENT
AS3098A
Standard
BOLT, SHEAR – DOUBLE HEX HEAD, UNS S66286 – 160 KSI
2024-04-10
CURRENT
AS3528A
Standard
NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 SILVER PLATED THREADS ONLY
2024-04-10
CURRENT
AS3625B
Standard
NUT, PLAIN, CASTELLATED, HEXAGON - UNS S66286, 130 KSI MIN
2024-04-10
CURRENT
AS9358B
Standard
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Premium Aircraft Quality, Double Vacuum Melted
2024-04-10
CURRENT
AMS6499C
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
Standard
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286, .5000-20 UNJF-3A
2024-04-10
CURRENT
AS3104B
Standard
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
2024-04-10
CURRENT
AS85049/125A
Standard
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Stock for Forging and Heading, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (Alloy A286), Consumable Electrode Remelted, 1650 °F (899 °C) Solution Heat Treated
2024-04-10
CURRENT
AMS5734L
This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing up to 5.00 inches (127 mm), inclusive, in nominal diameter or least distance between parallel sides (thickness), and stock for forging or heading.
Standard
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
2024-04-10
CURRENT
AMS5517N
This specification covers a corrosion-resistant steel in the form of sheet and strip 0.005 inch (0.13 mm) and over in nominal thickness.
Standard
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For
2024-04-05
CURRENT
MA7211A
This procurement specification covers split cotter pins with optional ends (see Figure 1), made to metric dimensions and made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S32100.
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .2500-28 UNJF-3A
2024-04-05
CURRENT
AS9566B
