Search Results

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750), Solution Heat Treated, Precipitation Hardenable

2024-05-09

CURRENT

AMS5582H

This specification covers a precipitation hardenable, corrosion- and heat-resistant nickel alloy in the form of seamless tubing 0.125 inch (3.18 mm) and over in nominal OD and 0.015 inch (0.38 mm) and over in nominal wall thickness.

Standard

Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Aircraft Quality, 125 ksi (862 MPa) Tensile Strength

2024-05-09

CURRENT

AMS6361H

This specification covers aircraft-quality, low-alloy steel in the form of round, seamless tubing.

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2024-05-09

CURRENT

ARP1947D

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).

Standard

Aircraft Tire-to-Wheel Performance Characteristics

2024-05-09

CURRENT

ARP5507A

This SAE Aerospace Recommended Practice (ARP) defines the performance criteria and validation for tire circumferential movement on the rim, in the laboratory, by a static test, as well as a performance assessment in service. This document is applicable to braked wheel positions using both bias ply and radial aircraft tires.

Standard

Machine Requalification Considerations for Fusion-Based Metal Additive Manufacturing

2024-05-09

CURRENT

ARP7064

This document defines a recommended practice for addressing metal additive manufacturing (AM) machine requalification for all fusion-based metal AM machines. In general, this applies to powder bed fusion (PBF) and wire- or powder-fed directed energy deposition (DED) technologies. Plasma, electron beam, or lasers are applicable energy source(s).

Standard

Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form

2024-05-09

CURRENT

AS7250E

This document covers all metal, self-locking wrenching nuts, plate nuts, shank nuts, and gang channel nuts made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 160 ksi tensile strength at room temperature, with maximum test temperature of parts at 1200 °F.

Standard

GAF24AF (GAE24AF) Tensile Test Strain Rate Implementation

2024-05-09

WIP

GAF24AF

Update of when to implement a specific strain rate into tensile testing.

Standard

Nuts, Self-Locking, UNS N07001 730 °C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric

2024-05-09

CURRENT

MA1943C

This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) types of nuts made from a corrosion and heat-resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 1210 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 °C.

Standard

Copper, Sheet, Strip, and Plate Soft Annealed

2024-05-01

CURRENT

AMS4500L

This specification covers unalloyed copper in the form of sheet, strip, and plate at least 0.015 inch (0.38 mm) in nominal thickness.

Standard

Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized

2024-05-01

CURRENT

AMS4375N

This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.5).

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications

2024-05-01

CURRENT

AMS5880F

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

Laser Powder Bed Fusion Produced Parts, Aluminum Alloy 7A50.60L (A7050-RAM2, composition similar to UNS A97050), Hot Isostatic Pressed and T74 Aged

2024-04-26

WIP

AMS7071

Material specification for parts produced using 7A50.60L (A7050-RAM2) using the laser powder bed fusion process

Standard

Steel, Corrosion Resistant Bars and Forgings, 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo, Vacuum Induction Plus, Vacuum Consumable Electrode Remelted

2024-04-26

WIP

AMS5933B

This specification covers a premium aircraft-quality corrosion-resistant steel in the form of bars, forgings, and forging stock.

Standard

F23AB/AMS5971 Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12.25Cr– 2.5Ni – 0.6Mo -- 0.45Ti (<0.13C), Carburizing Aircraft Premium Quality, VIM-VAR or VAR, 190ksi (Composition similar to UNS S41429)

2024-04-26

WIP

F23AB/AMS5971

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

F23AA/AMS5970 Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12.25Cr– 2.5Ni – 0.6Mo -- 0.45Ti (<0.13C), Carburizing Aircraft Premium Quality, VIM-VAR or VAR, 170ksi (Composition similar to UNS S41429)

2024-04-26

WIP

F23AA/AMS5970

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock

Standard

Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed, Fine Grained

2024-04-25

CURRENT

AMS4278C

This specification covers an aluminum alloy in the form of alclad sheet over 0.039 to 0.126 inches (0.99 to 3.20 mm), inclusive, in nominal thickness with a fine-grain core of ASTM No. 6 or finer (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles (2395-T84), 3.95Cu - 1.15Li - 0.3Ag - 0.5Mg - 0.1Zr, Solution Heat Treated, Stress Relieved by Stretching, and Aged

2024-04-25

CURRENT

AMS4359A

This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 1.500 inches (1.02 to 38.10 mm), inclusive, in thickness, and produced with maximum cross-sectional area of 23.25 square inches (15000 mm2) and a maximum circumscribing circle diameter (circle size) of 15.5 inches (394 mm) (see 2.4.1 and 8.6).

Standard

Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized

2024-04-25

CURRENT

AMS4016N

This specification covers an aluminum alloy in the form of sheet and plate 0.017 to 2.000 inches (0.43 to 50.80 mm), inclusive, in nominal thickness (see 8.6).

Standard

Aluminum Alloy Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet), Solution Heat Treated, High Formability

2024-04-25

CURRENT

AMS4297C

This specification covers an aluminum alloy in the form of sheet 0.020 to 0.128 inch (0.51 to 3.25 mm), inclusive, in nominal thickness (see 8.5).