Search Results

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

HOSE ASSEMBLY, CONVOLUTED, PTFE, METALLIC REINFORCED, LOW PRESSURE, CONDUCTIVE, FLARELESS, STRAIGHT TO STRAIGHT

2024-04-10

CURRENT

AS6996

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.

Standard

Steel, Corrosion- and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging

2024-03-27

CURRENT

AMS5805K

This specification covers a corrosion- and heat-resistant steel in the form of welding wire.

Standard

BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH

2024-03-18

CURRENT

AS24461E

Standard

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)

2024-03-12

CURRENT

AS39029/78D

Standard

Identification and Packaging Elastomeric Products

2024-03-04

CURRENT

AMS2810J

This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.

Standard

Storage, Handling, and Shipping of Aircraft Wheel and Tire Assemblies

2024-03-01

CURRENT

ARP6951

This SAE Aerospace Recommended Practice (ARP) identifies the best practices to reduce damage and promote safety during the storage, handling, and shipping of W/T assemblies.

Standard

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

2024-02-23

CURRENT

J2412_202402

This test method specifies the operating procedures for a controlled-irradiance, xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test duration, as well as any exceptions to the specimen preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. Any deviation to this test method, such as the use of optical filter combinations, is to be agreed upon by contractual parties.

Standard

INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYTETRAFLUOROETHYLENE

2024-02-16

CURRENT

AS23053/12B

Standard

Corrosion Removing Compound for Aircraft Surfaces

2024-02-12

CURRENT

AMS1640D

This specification establishes requirements for a corrosion-removing compound in the form of a liquid concentrate.

Standard

HIGH CONFORMANCE SEAL, TYPE I AND II STANDARD AND LOW PROFILE

2024-01-16

CURRENT

AS1895/23D

Standard

SEAL, TYPE I AND II STANDARD AND LOW PROFILE

2024-01-16

CURRENT

AS1895/7J

Standard

Steel, Welding Wire, 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C), Vacuum Melted, Environment Controlled Packaging

2023-12-26

CURRENT

AMS6459G

This specification covers a low-alloy steel in the form of welding wire.

Standard

SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, NYLON COIL

2023-12-20

CURRENT

AS1294A

Standard

Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV Non-Glycol Based

2023-12-13

CURRENT

AMS1428/2A

The foundation specification (AMS1428) and the category specifications (AMS1428/1 and AMS1428/2) cover deicing/anti-icing materials in the form of a fluid.

Standard

STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT STRAP, TIE DOWN, ADJUSTABLE, CORROSION-RESISTANT STEEL, TYPE VI, CLASS 1

2023-12-13

CURRENT

AS23190/3C

Standard

Steel, Welding Wire, 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 - 0.17C), Vacuum Melted, Environment Controlled Packaging

2023-11-10

CURRENT

AMS6468G

This specification covers an alloy steel in the form of welding wire.

Standard

Steel, Bars, Forgings, Rings, and Stock for Forging or Flash Welded Rings Aircraft Quality 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) Annealed

2023-10-20

CURRENT

AMS6382S

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash-welded rings, and stock for forging or flash-welded rings.

Standard

Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)

2023-10-16

CURRENT

AMS4612L

This specification covers a copper alloy (naval brass) in the form of bars and rods.