Search Results

Standard

Peening Media, Conditioned Stainless Steel Cut Wire Shot (AWS)

2024-05-13

WIP

AMS2431/4E

The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.

Standard

Peening Media, Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC)

2024-05-13

WIP

AMS2431/3F

The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.

Standard

Peening Media, Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)

2024-05-13

WIP

AMS2431/8D

This specification, in conjunction with the general requirements for peening media covered in AMS2431, establishes the requirements for the procurement of conditioned carbon steel cut wire shot with a hardness of 55 to 62 HRC.

Standard

Reaffirm E 2024 - spring

2024-05-13

WIP

REFIRM-E-S2024

The following document were been proposed by the sponsor or by committee E for Reaffirmation at the Spring meeting 2024.

Standard

Reaffirmation Ballot - F 2024 Spring

2024-05-13

WIP

REFIRM-F-S2024

The following document has been proposed by the sponsor or by committee F for Reaffirmation at the Spring meeting 2024.

Standard

Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material

2024-05-10

WIP

AMS3023D

This specification covers a trimethylol propane triheptanoate fluid (see 8.2) representative of standard type (SPC) gas turbine engine oils.

Standard

GAF24AF (GAE24AF) Tensile Test Strain Rate Implementation

2024-05-09

WIP

GAF24AF

Update of when to implement a specific strain rate into tensile testing.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750), Solution Heat Treated, Precipitation Hardenable

2024-05-09

CURRENT

AMS5582H

This specification covers a precipitation hardenable, corrosion- and heat-resistant nickel alloy in the form of seamless tubing 0.125 inch (3.18 mm) and over in nominal OD and 0.015 inch (0.38 mm) and over in nominal wall thickness.

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2024-05-09

CURRENT

ARP1947D

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).

Standard

Machine Requalification Considerations for Fusion-Based Metal Additive Manufacturing

2024-05-09

CURRENT

ARP7064

This document defines a recommended practice for addressing metal additive manufacturing (AM) machine requalification for all fusion-based metal AM machines. In general, this applies to powder bed fusion (PBF) and wire- or powder-fed directed energy deposition (DED) technologies. Plasma, electron beam, or lasers are applicable energy source(s).

Standard

Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form

2024-05-09

CURRENT

AS7250E

This document covers all metal, self-locking wrenching nuts, plate nuts, shank nuts, and gang channel nuts made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 160 ksi tensile strength at room temperature, with maximum test temperature of parts at 1200 °F.

Standard

Nuts, Self-Locking, UNS N07001 730 °C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric

2024-05-09

CURRENT

MA1943C

This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) types of nuts made from a corrosion and heat-resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 1210 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 °C.

Standard

Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered

2024-05-08

WIP

AMS3669H

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.

Standard

Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered

2024-05-08

WIP

AMS3668F

This specification covers two types of virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in length, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered

2024-05-06

WIP

AMS3660F

This specification covers virgin, unfilled, polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).

Standard

Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized

2024-05-01

CURRENT

AMS4375N

This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.5).

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications

2024-05-01

CURRENT

AMS5880F

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

Copper, Sheet, Strip, and Plate Soft Annealed

2024-05-01

CURRENT

AMS4500L

This specification covers unalloyed copper in the form of sheet, strip, and plate at least 0.015 inch (0.38 mm) in nominal thickness.

Standard

Laser Powder Bed Fusion Produced Parts, Aluminum Alloy 7A50.60L (A7050-RAM2, composition similar to UNS A97050), Hot Isostatic Pressed and T74 Aged

2024-04-26

WIP

AMS7071

Material specification for parts produced using 7A50.60L (A7050-RAM2) using the laser powder bed fusion process