Search Results

Standard

Aluminum Alloy, Plate (7140-T7451), 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr, Solution Heat Treated, Stress Relieved, and Overaged

2024-05-20

WIP

AMS4401C

This specification covers an aluminum alloy in the form of plate 4.001 to 10.000 inches (101.60 to 254.00 mm), inclusive, in nominal thickness.

Standard

Spring 2024 D Reaffirmation Ballot

2024-05-20

WIP

S2024DReaffirm

The documents listed in this ballot are being proposed for reaffirmation

Standard

Magnesium Alloy Welding Wire, 9.0Al - 2.0Zn (AZ92A)

2024-05-17

CURRENT

AMS4395G

This specification covers a magnesium alloy in the form of welding wire (see 8.5).

Standard

Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged

2024-05-17

CURRENT

AMS4408B

This specification covers an aluminum alloy in the form of plate 4.000 to 10.000 inches (101.6 to 254.0 mm), inclusive, in nominal thickness (see 8.5).

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750), Vacuum Melted, Solution Heat Treated, Precipitation Hardenable to 170 ksi (1172 MPa) Tensile Strength

2024-05-17

CURRENT

AMS5583G

This specification covers a precipitation hardenable corrosion- and heat-resistant nickel alloy in the form of seamless tubing.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted, Solution Heat Treated

2024-05-17

CURRENT

AMS5828H

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

Standard

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged

2024-05-17

CURRENT

AMS4340H

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 5.000 inches (127.00 mm), inclusive, in nominal diameter or least thickness (see 8.5).

Standard

Sheet and Strip Surface Finish Nomenclature

2024-05-16

CURRENT

AS4194B

This SAE Aerospace Standard (AS) defines the nomenclature for surface finishes commonly used for sheet and strip in aerospace material specifications. It is applicable to steel and to iron, nickel, cobalt, and titanium base alloys.

Standard

Hard Anodic Coating on Aluminum and Aluminum Alloys

2024-05-16

CURRENT

AMS2469L

This specification establishes the requirements for a hard anodic coating on aluminum and aluminum alloys.

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2024-05-09

CURRENT

ARP1947D

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).

Standard

Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-05-01

CURRENT

AMS4352K

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles up to 40 square inches (258 cm2) in cross-sectional area (solids) and up to 8.5 inches (216 mm) OD by 1.188 inches (30.18 mm) wall thickness (tubing) (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T861 Sheet and Plate), Solution Heat Treated, 6% Cold Worked and Artificially Aged

2024-04-25

CURRENT

AMS4467C

This specification covers an aluminum alloy in the form of alclad sheet and plate supplied in the -T861 temper.

Standard

Aluminum Alloy, Coiled Sheet, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024; -T4 Coiled Sheet), Solution Heat Treated

2024-04-25

CURRENT

AMS4475C

This specification covers an aluminum alloy in the form of alclad coiled sheet from 0.010 to 0.128 inch (0.25 to 3.25 mm), inclusive, in thickness supplied in the -T4 temper (see 8.5).

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)

2024-04-23

CURRENT

AS27646/1B

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

PLUG, EXPANSION, ALUMINUM, 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024)

2024-04-10

CURRENT

AS3121B

Standard

PIN, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, LONG (UNS A92024)

2024-04-10

CURRENT

AS3122B

Standard

Copper Alloy, Brazing Filler Metal, 52.5Cu - 38Mn - 9.5Ni, 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range

2024-04-10

CURRENT

AMS4764H

This specification covers a copper alloy in the form of wire, rod, sheet, strip, foil, and powder and a viscous mixture (paste) of powder in a suitable binder (see 8.6).

Standard

PIN, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT, UNS A92024

2024-04-10

CURRENT

AS3124B