Search Results

Standard

Identification and Packaging Elastomeric Products

2024-03-04

CURRENT

AMS2810J

This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.

Standard

Elastomer: Fluorosilicone Rubber (FVMQ), Fuel and Oil Resistant, High Strength, 45 – 55 Shore A Hardness, For Products in Fuel Systems / Lubricating Oils

2023-10-16

CURRENT

AMS3329D

This specification covers a high strength fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, molded O-ring cord, and molded in place gaskets for aeronautical and aerospace applications.

Standard

Sponge, Silicone Rubber Closed Cell, Firm

2023-05-01

CURRENT

AMS3196H

This specification covers a closed cell silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.

Standard

O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F)

2023-04-12

CURRENT

AMSP5510B

This specification covers requirements for the material, design, testing and packaging of straight thread tube fitting boss O-rings. O-rings covered by this specification are acrylonitrile-butadiene rubber.

Standard

Rubber: Acrylonitrile-Butadiene (NBR) Fuel-Resistant 60 - 70 Type A Hardness

2022-08-05

CURRENT

AMSP5315C

This specification covers an acrylonitrile-butadiene (NBR) rubber in the form of molded rings, molded compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

Standard

Elastomer: Chloroprene Rubber (CR) Weather Resistant 55 - 65

2022-06-13

CURRENT

AMS3241K

This specification covers a chloroprene (CR) rubber that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes such as window channels, bumper pads, chafing strips, etc. For molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the equivalent AMS7XXX specification.

Standard

Elastomer: Chloroprene Rubber (CR) Weather Resistant 35 - 45

2022-06-13

CURRENT

AMS3240L

This specification covers a chloroprene rubber (CR) that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes such as window channels, bumper pads, chafing strips, etc. For molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the equivalent AMS7XXX specification.

Standard

Elastomer: Silicone Rubber (MQ/VMQ), Fiberglass Fabric Reinforced 65 to 75 Shore A Hardness

2021-12-13

CURRENT

AMS3316A

This specification covers a fiberglass reinforced silicone rubber (MQ/VMQ) in the form of sheet, strip, and molded parts, color coded light blue per ARP1527.

Standard

Elastomer: Nitrile Rubber (NBR) Synthetic Oil Resistant Compression Seals, 65 to 75 Type A Hardness for Products in Engine Oil Systems

2021-10-12

CURRENT

AMS7289

This specification covers a nitrile rubber (NBR) in the form of molded compression seals such as O-rings, T-seals, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, use the AMS3786 specification, which is intended for that use.

Standard

Sponge, Fluorosilicone (FVM) Rubber Closed Cell

2021-08-12

CURRENT

AMS3323B

This specification covers a fluorosilicone (FVM) rubber sponge in the form of sheet, strip, extrusions, and molded shapes.

Standard

Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness

2021-03-16

CURRENT

AMS3307E

This specification covers a silicone (VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7XXX specification.

Standard

Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65

2020-09-18

CURRENT

AMS3248D

This specification covers an ethylene propylene (EPM) rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.

Standard

Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at 275°F (135°C)

2020-02-22

WIP

AMSP83461A

This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65° to 275°F (-54° to 135°C). This material gives improved high temperature performance over materials conforming to MIL-P-25732.

Standard

Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85

2020-01-03

CURRENT

AMS3229K

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems

2019-12-03

CURRENT

AMS7271K

This specification covers an acrylonitrile-butadiene rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

Standard

Static Seal Test Fixture and Procedure

2019-11-05

CURRENT

AS7982

This SAE Aerospace Standard (AS) provides dimensions and procedures for a standardized test fixture used to evaluate the static performance of O-rings and other seal types in glands per AS4716 and AS5857.

Standard

Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75

2019-11-05

CURRENT

AMS3215N

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

Rubber: Butyl (IIR) Low Compression Set and Low Moisture/Gas Permeability 65 to 75 Type A Hardness for Seals in Desiccated or Other Systems Requiring Resistance to Gas and/or Water Vapor Permeation

2019-07-18

CURRENT

AMS7601

This specification covers a butyl rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes use AMS3941 specification.

Standard

Ethylene Propylene Rubber Phosphate Ester Resistant 65 - 75

2019-06-17

CURRENT

AMS3253B

This specification covers an ethylene propylene elastomer in the form of molded sheet and shapes, color coded purple per ARP1527.

Standard

Silicone Rubber Sponge Closed Cell, Medium

2019-06-14

CURRENT

AMS3195H

This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.