Search Results

Standard

Elastomer: Silicone Rubber (MQ/VMQ), General Purpose, 35 - 45 Durometer Type ‘A’ Hardness

2024-04-25

CURRENT

AMS3301K

This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 1: Terms and Definitions

2024-04-23

CURRENT

J3078/1_202404

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.

Standard

Tire Burst Test Methodology

2024-04-17

CURRENT

ARP6265

This document describes a recommended test procedure to assess the burst characteristics of tires used on 14CFR Part 25 or similar transport airplanes.

Standard

Nitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 – 75

2024-04-11

WIP

AMS3224B

This specification covers nitrile-butadiene elastomer in the form of molded sheet and shapes, color coded yellow per ARP1527.

Standard

Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 55 - 65

2024-04-10

WIP

AMS3202P

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 35 - 45

2024-04-10

WIP

AMS3201N

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

HOSE ASSEMBLY, CONVOLUTED, PTFE, METALLIC REINFORCED, LOW PRESSURE, CONDUCTIVE, FLARELESS, STRAIGHT TO STRAIGHT

2024-04-10

CURRENT

AS6996

Standard

Synthetic Rubber, Low-Temperature Resistant, 45-55

2024-04-01

WIP

AMS3205P

This specification covers a synthetic rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.

Standard

Nickel Wire and Ribbon 99Ni

2024-04-01

CURRENT

AMS5555G

This specification covers a nickel in the form of round wire and rectangular ribbon.

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.

Standard

Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)

2024-04-01

CURRENT

AMS6299H

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

Standard

Spring Pins, Tubular, Carbon Steel, Procurement Specification for

2024-04-01

CURRENT

AS7205A

This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.

Standard

Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants

2024-03-29

WIP

AIR6284A

This SAE Aerospace Information Report (AIR) covers forced air technology including: reference material, equipment, safety, operation, and methodology. This resource document is intended to provide information and minimum safety guidelines regarding use of forced air or forced air/fluid equipment to remove frozen contaminants. During the effective period of this document, relevant sections herein should be considered and included in all/any relevant SAE documents.

Standard

Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged

2024-03-22

CURRENT

AMS4157F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).

Standard

Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration

2024-03-18

CURRENT

ARP5088C

The test method describes the procedure for determination of the total acid number (TAN) of new and degraded polyol ester and diester-based gas turbine lubricants by the potentiometric titration technique. The method was validated to cover an acidity range of 0.05 to 6.0 mg KOH g-1. The method may also be suitable for the determination of acidities outside of this range and for other classes of lubricants.

Standard

Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification for

2024-03-18

CURRENT

AS81914A

The tubing described in this document is for use in electrical interconnect systems for the protection and routing of wire bundle installations.

Standard

Test Method for Aerospace Firewall Sealant Flame Penetration

2024-03-18

CURRENT

AS5127/2D

This SAE Aerospace Standard (AS) describes the test methods to determine the flammability performance and capability to control the passage of, and effects from, fire on aircraft firewall sealing compounds. The methods are based on requirements of FAR Part 25, Sections 25.865, 25.867, 25.1191, and 25.1193 and may be used to demonstrate compliance with the requirements established by FAA AC 20-135. This standard shall be used in conjunction with applicable material specifications.