Refine Your Search

Date

Date

Topic

Topic

Author

Author

Standard Human Factors and Ergonomics Lubricants Nickel Vehicle dynamics Metals Logistics Forming Commercial Vehicle Lubricating oils

Search Results

Viewing 1 to 20 of 608
123Next >Last >>
Sort by published
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 1: Terms and Definitions
2024-04-23
CURRENT
J3078/1_202404
SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.
Standard

Fuel and Lubricant Tanks for Motorcycles
2024-04-15
CURRENT
J1241_202404
This SAE Recommended Practice is applicable to two- or three-wheel motorcycles intended for highway use. Unless noted, requirements apply to both metallic and nonmetallic tanks. Accessory or aftermarket tanks as well as original equipment tanks are covered.
Standard

Ambulance Patient Compartment Seated Occupant Excursion Zone Evaluation
2024-01-19
CURRENT
J3059_202401
This SAE Information Report describes the testing and reporting procedures that may be used to evaluate and document the excursion of a worker or civilian when transported in a seated and restrained position in the patient compartment of a ground ambulance when exposed to a front, side, or rear impact. Its purpose is to provide seating and occupant restraint manufacturers, ambulance builders, and end-users with testing procedures and documentation methods needed to identify head travel paths in crash loading events. This is a component level test. The seating system is tested in free space to measure maximum head travel paths. The purpose is not to identify stay out zones. Rather, the goal is to provide ambulance manufacturers with the data needed to design safer and functionally sound workstations for Emergency Medical Service workers so that workers are better able to safely perform patient care tasks in a moving ambulance.
Standard

Safety Labels of Off-Road Work Machines
2024-01-16
CURRENT
J115_202401
SAE J115 specifies the relevant ISO standards for application to safety labels for use on off-road work machines as defined in SAE J1116.
Standard

Operator Enclosure Pressurization System Test Procedure
2023-12-07
CURRENT
J1012_202312
This SAE Recommended Practice establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems for construction, general-purpose industrial, agricultural, forestry, and specialized mining machinery as categorized in SAE J1116 for off-road, self-propelled work machines.
Best Practice

AVSC Best Practice for Developing ADS Safety Performance Thresholds Based on Human Driving Behavior
2023-08-29
CURRENT
AVSC00012202308
Automated driving system (ADS) developers need a way to describe safe and competent driving for automated driving system-dedicated vehicles (ADS-DVs) in a way that is relatable to how stakeholders interpret safe driving today. Metrics informed by competent and safe human behavior could improve understanding and confidence in ADS-DVs. One way to make ADS safety performance relatable to stakeholders is to adopt an intuitive comparison to behaviors displayed on the road by human drivers. This best practice outlines an approach which involves comparing the on-road driving behavior of ADSs to that of human drivers, aiming to gain a deeper understanding of ADS behavior and its implications. It includes and assessment that centers on the predictability and similarity of ADS behavior relative to observed human driving behavior. By adopting this approach, a more comprehensive evaluation of the performance of ADS fleets can be achieved.
Standard

Motor Vehicle Driver and Passenger Head Position
2023-07-19
CURRENT
IA9120
This SAE Standard describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.
Standard

Motor Vehicle Driver and Passenger Head Position
2023-07-19
CURRENT
J1052_202307
This SAE Standard describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for head space and are required for several measures defined in SAE J1100. Separate contours are defined depending on occupant seat location and the desired percentage (95 and 99) of occupant accommodation. This document is primarily focused on application to Class A vehicles (see SAE J1100), which include most personal-use vehicles (passenger cars, sport utility vehicles, pick-up trucks). A procedure for use in Class B vehicles can be found in Appendix B.
Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening
2023-06-27
CURRENT
J444_202306
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Standard

Alarm - Backup - Electric Laboratory Performance Testing
2023-06-27
CURRENT
J994_202306
The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated backup alarm devices primarily intended for use on off-road, self-propelled work machines as defined by SAE J1116 (limited to categories of (1) construction, and (2) general purpose industrial).
Standard

Cartridge Cavity
2023-06-02
CURRENT
J2494/4_202306
This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.
Standard

Free-Rolling Cornering Test for Truck and Bus Tires
2023-05-10
CURRENT
J2429_202305
This SAE Recommended Practice describes a test method for determination of heavy truck (Class VI, VII, and VIII) tire force and moment properties under cornering conditions. The properties are acquired as functions of normal force and slip angle using a sequence specified in this practice. At each normal force increment, the slip angle is continually ramped or stepped. The data are suitable for use in vehicle dynamics modeling, comparative evaluations for research and development purposes, and manufacturing quality control. This document is intended to be a general guideline for testing on an ideal machine. Users of this SAE Recommended Practice may modify the recommended protocols to satify the needs of specific use-cases, e.g., reducing the recommended number of test loads and/or pressures for benchmarking purposes. However, due care is necessary when modifying the protocols to maintain data integrity.
Standard

Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
2023-05-01
CURRENT
J2970_202305
This SAE Standard provides the testing and functional requirements guidance necessary for a leak detection device that uses any non-A/C refrigerant tracer gas, such as helium or a nitrogen-hydrogen blend, to provide functional performance equivalent to a refrigerant electronic leak detector. It explains how a non-refrigerant leak detector’s calibration can be established to provide levels of detection equal to electronic leak detectors that meet SAE J2791 for R-134a and SAE J2913 for R-1234yf.
Standard

R134a Refrigerant Charge Determination Test Method
2023-04-19
WIP
J3023
The purpose of this document is to establish guidelines for determining the critical R134a refrigerant charge for off-road, self-propelled work machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390. It will develop a minimum to maximum refrigerant charge range in which the HVAC system can maintain proper operation. Operating conditions and characteristics of the equipment will influence the optimum charge. Since these conditions and characteristics vary greatly from one application to another, careful consideration should be taken to determine the optimum R134a refrigerant charge for the HVAC system.
Standard

Combined Cornering and Braking Test for Truck and Bus Tires
2023-03-01
CURRENT
J2675_202303
This SAE Recommended Practice describes a test method for determination of heavy truck (Class VI, VII, and VIII) tire force and moment properties under combined cornering and braking conditions. The properties are acquired as functions of slip angle, normal force, and slip ratio. Slip angle and normal force are changed incrementally using a sequence specified in this document. At each increment, the slip ratio is continually changed by application of a braking torque ramp. The data are suitable for use in vehicle dynamics modeling, comparative evaluations for research and development purposes, and manufacturing quality control. This document is intended to be a general guideline for testing on an ideal machine, and modifications to the protocols recommended within are expected depending on the requirements of each customer. Due care is necessary when modifying protocols to ensure that the integrity of the data is maintained.
Standard

Ambulance Modular Body Evaluation - Quasi-Static Loading for Type I and Type III Modular Ambulance Bodies
2023-02-06
CURRENT
J3057_202302
This SAE Recommended Practice describes the test procedures for conducting quasi-static modular body strength tests for ambulance applications. Its purpose is to establish recommended test practices which standardize the procedure for Type I and Type III bodies, provide ambulance builders and end-users with testing procedures and, where appropriate, provide acceptance criteria that, to a great extent, ensures the ambulance structure meets the same performance criteria across the industry. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment - Part 2: Air Filter Element Test Method
2023-01-25
CURRENT
J3078/2_202301
SAE J3078/2 provides a test method to determine filter performance for fresh and recirculation air filters used in operator enclosures with an air ventilation system. SAE J3078/2 is not applicable for testing vapor and gas filters. The category of machines covered includes off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ASABE standard ANSI/ASAE S390.
Standard

Ontology and Lexicon for Automated Driving System (ADS)-Operated Vehicle Behaviors and Maneuvers in Routine/Normal Operating Scenarios
2023-01-13
CURRENT
J3164_202301
This document provides a high-level ontology and lexicon for describing on-road ADS-operated vehicle behavioral competencies and driving maneuvers that comprise routine/normal performance of the complete DDT, as defined in SAE J3016. It provides definitions of behavior, maneuver, scenario, and scene. This initial high-level lexicon and ontology are developed for ADS driving behaviors, including considerations for hierarchy of behaviors, and relationships among maneuvers, operational design domain (ODD) elements, and object and event detection and response (OEDR). Considerations for describing scenarios using this lexicon and ontology are discussed. This document describes ADS-operated vehicle motion control maneuvers during routine/normal operation. Maneuvers of other road users are not evaluated. This document assumes left-hand drive vehicles and road infrastructure.
123Next >Last >>
X