Refine Your Search

Date

Date

Topic

Topic

Author

Author

Vehicle dynamics Lubricants Hydraulic fluids Forming Commercial Vehicle Lubricating oils Nickel Standard Logistics Metals

Search Results

Viewing 1 to 20 of 510
123Next >Last >>
Sort by published
Standard

Fuel and Lubricant Tanks for Motorcycles
2024-04-15
CURRENT
J1241_202404
This SAE Recommended Practice is applicable to two- or three-wheel motorcycles intended for highway use. Unless noted, requirements apply to both metallic and nonmetallic tanks. Accessory or aftermarket tanks as well as original equipment tanks are covered.
Standard

Safety Labels of Off-Road Work Machines
2024-01-16
CURRENT
J115_202401
SAE J115 specifies the relevant ISO standards for application to safety labels for use on off-road work machines as defined in SAE J1116.
Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening
2023-06-27
CURRENT
J444_202306
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Standard

Cartridge Cavity
2023-06-02
CURRENT
J2494/4_202306
This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.
Standard

Free-Rolling Cornering Test for Truck and Bus Tires
2023-05-10
CURRENT
J2429_202305
This SAE Recommended Practice describes a test method for determination of heavy truck (Class VI, VII, and VIII) tire force and moment properties under cornering conditions. The properties are acquired as functions of normal force and slip angle using a sequence specified in this practice. At each normal force increment, the slip angle is continually ramped or stepped. The data are suitable for use in vehicle dynamics modeling, comparative evaluations for research and development purposes, and manufacturing quality control. This document is intended to be a general guideline for testing on an ideal machine. Users of this SAE Recommended Practice may modify the recommended protocols to satify the needs of specific use-cases, e.g., reducing the recommended number of test loads and/or pressures for benchmarking purposes. However, due care is necessary when modifying the protocols to maintain data integrity.
Standard

Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
2023-05-01
CURRENT
J2970_202305
This SAE Standard provides the testing and functional requirements guidance necessary for a leak detection device that uses any non-A/C refrigerant tracer gas, such as helium or a nitrogen-hydrogen blend, to provide functional performance equivalent to a refrigerant electronic leak detector. It explains how a non-refrigerant leak detector’s calibration can be established to provide levels of detection equal to electronic leak detectors that meet SAE J2791 for R-134a and SAE J2913 for R-1234yf.
Standard

Combined Cornering and Braking Test for Truck and Bus Tires
2023-03-01
CURRENT
J2675_202303
This SAE Recommended Practice describes a test method for determination of heavy truck (Class VI, VII, and VIII) tire force and moment properties under combined cornering and braking conditions. The properties are acquired as functions of slip angle, normal force, and slip ratio. Slip angle and normal force are changed incrementally using a sequence specified in this document. At each increment, the slip ratio is continually changed by application of a braking torque ramp. The data are suitable for use in vehicle dynamics modeling, comparative evaluations for research and development purposes, and manufacturing quality control. This document is intended to be a general guideline for testing on an ideal machine, and modifications to the protocols recommended within are expected depending on the requirements of each customer. Due care is necessary when modifying protocols to ensure that the integrity of the data is maintained.
Standard

Ambulance Modular Body Evaluation - Quasi-Static Loading for Type I and Type III Modular Ambulance Bodies
2023-02-06
CURRENT
J3057_202302
This SAE Recommended Practice describes the test procedures for conducting quasi-static modular body strength tests for ambulance applications. Its purpose is to establish recommended test practices which standardize the procedure for Type I and Type III bodies, provide ambulance builders and end-users with testing procedures and, where appropriate, provide acceptance criteria that, to a great extent, ensures the ambulance structure meets the same performance criteria across the industry. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Standard

Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices - Truck and Bus
2022-11-22
CURRENT
J2024_202211
This SAE Information Report establishes a minimum level of uniform recipes for contaminants which may be used when durability testing pneumatic components to obtain additional information on how a device may perform under more true-to-life operating conditions. This type of contamination testing, however, is not meant to replace the type of performance testing described in SAE J1409 and SAE J1410. Durability testing in the presence of contamination will yield results more reflective of actual in-service field conditions and provide an additional evaluation of pneumatic devices. While the contaminant supply rate and other test criteria of the device being tested must be set by the device manufacturer or user, the items covered in this document will be:
Standard

Crane Hoist Line Speed and Power Test Procedure
2022-10-26
WIP
J820
This document applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if the load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. This recommended practice applies to all mechanical, hydraulic, and electric powered hoist mechanisms.
Standard

Mobile Crane Working Area Definitions
2022-09-01
CURRENT
J1028_202209
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Common Port Connections Used in Truck and Bus Air Brake Systems
2022-08-05
CURRENT
J3244_202208
This SAE Information Report lists common port connection types used in truck, bus, truck-trailer, converter dolly, and multi-purpose vehicles with air brake systems at the time of publication. The purpose of the document is to give system designers and users a starting point for connector selection and a reference to the standards that govern these connector types. Also included are notes on common practices associated with these ports. CAUTION: Consult the relevant standard for the connector before making a decision on suitability for use in a specific application.
Standard

Self-Propelled Sweepers Sweep-Ability Performance
2022-07-26
CURRENT
J1702_202207
This SAE Standard establishes a method of disclosing the sweep-ability performance of self-propelled sweepers that use broom means for sweeping and collection, together with either a mechanical- or pneumatic-conveyance system for the transfer of “sweepings” into a collection hopper.
Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus
2022-06-22
CURRENT
J2698_202206
This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.
Standard

Sealing Compound, Polythioether Rubber, Light-Cured, for Integral Fuel Tanks and General Purpose, Intermittent use to 360 °F (182 °C)
2022-04-25
CURRENT
AMS1389
This specification covers polythioether rubber fuel resistant sealing compounds, supplied as a two-component system, which cure rapidly when exposed to a cure on demand (CoD) light source used to initiate a reaction that generates crosslinking of sealant polymers. Type 2 compounds also cure at ambient conditions, without light exposure.
Standard

Flares for Tubing
2022-04-25
WIP
J533

This SAE Standard covers specifications and performance requirements for 37 degree and 45 degree single and double flares for tube ends intended for use with SAE J512, SAE J513, SAE J514, and ISO 8434-2 connectors. The flares described in this document are intended for use with SAE metallic tube materials. Considerations such as the effects of wall thickness selection for specific working pressures, identifying appropriate length of thread engagements for specific applications with mating connectors and other associated criteria, shall be the responsibility of the user. For applicable nominal reference working pressures for hydraulic tubing, refer to SAE J1065 and ISO 10763.

In an effort to standardize within a global marketplace and ensure that companies can remain competitive in an international market, it is the intent of this document to promote the use of metric tube and connector sizes, which will:

  • Lead to one global system.
123Next >Last >>
X