Search Results

This SAE Aerospace Standard (AS) establishes the general requirements for the design, construction, acceptance, and qualification testing of flat cut-off pressure compensated, variable delivery hydraulic pumps used in military aircraft hydraulic systems. It also provides parameters for a Procurement Specification to be used in conjunction with this AS. The hydraulic pumps defined by this AS are generally for use in aircraft hydraulic systems conforming to and as defined in AS5440 and MIL-H-8891, as applicable. NOTES: 1. Hydraulic pumps may incorporate features such as a clutch in the input drive, which will not be covered by this standard. 2. AS595 should be used for commercial aircraft hydraulic pumps. 3. This document should not be used for hydraulic pumps in Electro-Hydrostatic Actuator applications (EHAs).

This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.

This SAE Aerospace Standard (AS) establishes the general requirements for the design, construction, acceptance, and qualification testing of flat cut-off pressure compensated, variable delivery hydraulic pumps used in military aircraft hydraulic systems. It also provides parameters for a Procurement Specification to be used in conjunction with this AS. The hydraulic pumps defined by this AS are generally for use in aircraft hydraulic systems conforming to and as defined in AS5440 and MIL-H-8891, as applicable.

This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.

This specification establishes the common requirements for variable delivery electric motor driven, hydraulic pump units, suitable for use in aircraft hydraulic systems.

It is intended that this SAE Aerospace Recommended Practice (ARP) will set down guidelines for the development and test of gas motors to provide a practical and reliable hot gas rotary actuation mechanism. Specific operational and test requirements shall be specified in a detail specification.

It is intended that this SAE Aerospace Recommended Practice (ARP) will set down guidelines for the development and test of gas motors to provide a practical and reliable hot gas rotary actuation mechanism. Specific operational and test requirements shall be specified in a detail specification.

This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.

This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for the design, construction, testing and performance of aerospace, maintenance free, factory pre-charged hydraulic accumulators. The accumulators are designed for use in aircraft hydraulic systems at maximum rated operating pressures up to 8000 psi (55158 KPa). The temperature range of the accumulator is -65 to 275 °F (-54 to 135 °C).

This specification establishes the common requirements for variable delivery electric motor driven, hydraulic pump units, suitable for use in aircraft hydraulic systems.

Outline drawings from all known pump manufacturers for the various size pumps listed in MIL-P-7740 were requested and those received have been combined to make up the various outline drawings. There has been prepared a composite outline drawing enclosing all of the individual outline drawings. Since the pump manufacturers' drawings will change over a period of time and complete detail is not shown, it is not possible to make a detailed mockup of any specific pump. These drawings are intended to provide information concerning the general space requirement for variable delivery pumps, and could be used to manufacture a composite mockup to indicate roughly the space required on a new engine design.

This specification and a detail pump specification establish the requirements for variable flow hydraulic pumps, for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891, as applicable. The general requirements for type I and type II hydraulic systems pumps are specified in MIL-H-8775 and for type III system pumps in MIL-H-8890.

This Specification covers constant displacement hydraulic motors, generally remotely mounted, using hydraulic fluid under pressure as the energy transfer medium for driving various accessories. Hydraulic motors shall be suitable for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891 as applicable.

This specification and a detail pump specification establish the requirements for variable flow hydraulic pumps, for use in aircraft hydraulic systems conforming to and as defined in MIL-H-5440 and MIL-H-8891, as applicable. The general requirements for type I and type II hydraulic systems pumps are specified in MIL-H-8775 and for type III system pumps in MIL-H-8890.

Gas for the purpose of this ARP shall be defined as the gaseous produces) resulting from the decomposition, dissociation, or combustion of liquid or solid mono or bi-propellants. Where other gases such as heated N2, H2, H2O (steam), etc., which may have similar physical and/or chemical properties as the defined "gas", are used to effect testing economies; they may be considered as being included in this ARP.

This specification establishes the common requirements for variable delivery, hydraulic pumps, suitable for use in aircraft; and the methods to be used for demonstrating compliance with these requirements.