Standard
Excavator and Backhoe Hand Signals
2023-10-05
CURRENT
J1307_202310
This SAE Recommended Practice applies to excavators and backhoe loaders, as defined in ISO 6165.
Search Results
Standard
Nomenclature - Hydraulic Backhoes
2020-03-04
CURRENT
J326_202003
This SAE standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.
Standard
Specification Definitions - Hydraulic Backhoes
2020-03-04
CURRENT
J49_202003
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard
Cutting Edge - Double Bevel Cross Sections
2020-01-15
CURRENT
J738_202001
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard
Hydraulic Excavator Operator Controls
2019-06-06
CURRENT
J1177_201906
This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.
Standard
Product Identification Numbering System of Off-Road Work Machines
2019-05-10
CURRENT
J1360_201905
This standard covers self-propelled off-road work machines as categorized in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.
Standard
Lift Capacity Calculation Method Scrap and Material Handlers
2019-04-15
CURRENT
J2518_201904
This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.
Standard
Volumetric Rating of Excavator Mounted, Bucket Linkage Operated Grapples
2019-04-15
CURRENT
J2754_201904
Standard
Nomenclature - Hydraulic Backhoes
2018-11-20
HISTORICAL
J326_201811
This SAE standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.
Standard
Specification Definitions - Hydraulic Backhoes
2018-11-14
HISTORICAL
J49_201811
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard
Cutting Edge - Double Bevel Cross Sections
2014-01-08
HISTORICAL
J738_201401
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard
Product Identification Numbering System of Off-Road Work Machines
2013-08-21
HISTORICAL
J1360_201308
This standard covers self-propelled off-road work machines as categorized in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.
Standard
Rated Operating Load for Loaders
2013-01-02
CURRENT
J818_201301
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard
Nomenclature - Hydraulic Backhoes
2012-11-01
HISTORICAL
J326_201211
This SAE Standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.
Standard
Specification Definitions - Hydraulic Backhoes
2012-07-16
HISTORICAL
J49_201207
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors.
Standard
Hydraulic Backhoe Lift Capacity
2012-05-11
CURRENT
J31_201205
This standard applies to hydraulically operated backhoes (as defined in SAE J1116) This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart Figure 1.
Standard
Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom
2011-12-08
CURRENT
J743_201112
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard
Nomenclature - Rollers and Compactors
2011-10-27
CURRENT
J1017_201110
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.
Standard
Drag Force Test Procedure for Construction, Forestry, and Industrial Machines
2011-10-27
CURRENT
J873_201110
This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.
Standard
Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast
2011-10-27
CURRENT
J1197_201110
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
