Search Results

Standard

Minimum General Standards for Oxygen Systems

2023-05-10

CURRENT

AS861C

This standard covers all types of oxygen breathing equipment used in non-military aircraft. It is intended that this standard supplements the requirements of the detail specification or drawings of specific components or assemblies (e.g., regulators, masks, cylinders, etc.). Where a conflict exists between this standard and detail specifications, detail specifications shall take precedence.

Standard

Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated

2023-04-26

CURRENT

AS1066B

This standard covers all types of manually operated high pressure oxygen, cylinder shut off valves for use in commercial aircraft. It is intended that the valve shall be attached to a pressure cylinder storing oxygen under a nominal pressure of 12.76 MPa (1850 psig) at 21 °C (70 °F). Upon opening the valve, oxygen will be permitted to discharge from the storage cylinder to the valve outlet and to other downstream components of the oxygen system. It shall also be possible to recharge the cylinder through the valve.

Standard

Minimum General Standards for Oxygen Systems

2021-08-11

HISTORICAL

AS861B

This standard covers all types of oxygen breathing equipment used in non-military aircraft. It is intended that this standard supplement the requirements of the detail specification or drawings of specific components or assemblies, e.g., regulators, masks, cylinders, etc. Where a conflict exists between this and detail specifications, detail specifications shall take precedence.

Standard

Glossary of Technical and Physiological Terms Related to Aerospace Oxygen Systems

2020-12-03

CURRENT

AIR171F

This document presents a glossary of many terms found in literature related to aviation oxygen systems and associated topics. Such a listing can never be all inclusive, but the majority of important terms are anticipated to be included for reference.

Standard

Aircraft Oxygen System Lines, Fabrication, Test, and Installation

2020-07-14

CURRENT

ARP1532B

This SAE Aerospace Recommended Practice (ARP) covers procedures or methods to be used for fabricating, handling, testing, and installation of oxygen lines in an aircraft oxygen system.

Standard

Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling, and Marking

2020-01-17

CURRENT

AIR1059F

This document provides guidance concerning the maintenance and serviceability of oxygen cylinders beginning with the quality of oxygen that is required, supplemental oxygen information, handling and cleaning procedures, transfilling, and marking of serviced oxygen assemblies. This document attempts to outline in a logical sequence oxygen quality, serviceability, and maintenance of oxygen cylinders. Content of this document can also be used for refilling of oxygen cylinder while installed on aircraft, directly or through an intermediate charging port.

Standard

Crewmember Demand Oxygen Mask for Transport Category Aircraft

2019-08-14

CURRENT

AS8026B

This standard covers oxygen masks and breathing valves used with both panel mounted and mask mounted demand and pressure-demand oxygen regulators. Mask mounted oxygen regulators are covered under other standards, but when the mask mounted regulator incorporates an integral exhalation valve, the performance of this valve shall meet the requirements of this standard.

Standard

Minimum Standards for Valve, High Pressure Oxygen, Line Shut Off, Manually Operated

2018-10-18

CURRENT

AS1214B

This SAE AEROSPACE Standard (AS) covers all types of manually operated high pressure Oxygen line shut off valves utilizing either metallic or nonmetallic valve seats for use in general and commercial type aircraft.

Standard

Oxygen System Integration and Performance Precautions

2018-10-18

CURRENT

AIR825/12A

Oxygen system integration and performance precautions are in particularly dependent on applicable sections of airworthiness requirements per FAR/JAR 25. In this document information will be provided on common principles and good practices regarding design criteria, installation, manufacturing, safety aspects and system handling during maintenance and inspection.

Standard

Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking

2017-05-19

HISTORICAL

AIR1059E

This document provides guidance concerning the maintenance and serviceability of oxygen cylinders beginning with the quality of oxygen that is required, supplemental oxygen information, handling and cleaning procedures, transfilling and marking of serviced oxygen assemblies. This document attempts to outline in a logical sequence oxygen quality, serviceability, and maintenance of oxygen cylinders. Content of this document can also be used for refilling of oxygen cylinder while installed on aircraft, directly or through an intermediate charging port.

Standard

Oxygen Flow Indicators

2016-06-09

HISTORICAL

AS916B

This SAE Aerospace Standard (AS) defines the overall requirements applicable to oxygen flow indicating devices intended to operate in conjunction with an oxygen regulator and mask system. Flow indicators covered by this document are for use with pressure demand, diluter-demand and continuous flow oxygen systems.

Standard

Crewmember Demand Oxygen Mask For Transport Category Aircraft

2016-06-09

HISTORICAL

AS8026A

This standard covers oxygen masks and breathing valves used with both panel mounted and mask mounted demand and pressure-demand oxygen regulators. Mask mounted oxygen regulators are covered under other standards, but when the mask mounted regulator incorporates an integral exhalation valve, the performance of this valve shall meet the requirements of this standard.

Standard

Bibliography of References Pertaining to The Effects of Oxygen on Ignition and Combustion of Materials

2014-10-16

CURRENT

AIR1169C

The scope of this document is to provide a list of documents of types pertaining to the effects of oxygen on ignition and combustion of materials. Consolidating these references in one place makes it easier to find documents of this type as these references are difficult to locate.

Standard

Oxygen Mask Assembly, Demand and Pressure Breathing, Crew

2014-10-16

CURRENT

AS452B

This standard covers both general type and quick-donning type mask assemblies in the following classes: a Class A, oronasal, demand b Class B, oronasal, pressure-demand c Class C, full face, demand d Class D, full face, pressure-demand

Standard

Oxygen Systems for General Aviation

2014-07-11

CURRENT

AIR822C

This SAE Aerospace Information Report (AIR) provides a general overview of oxygen systems for general aviation use. Included are a brief review of the factors and effects of hypoxia, system descriptions, and mission explanations for system or component selection, and techniques for safe handling of oxygen distribution systems.

Standard

Installation of Liquid Oxygen Systems in Civil Aircraft

2012-11-06

CURRENT

AIR1223B

Standard

Installation of Liquid Oxygen Systems in Civil Aircraft

2012-10-08

HISTORICAL

AIR1223A

Standard

Reducers, Oxygen Pressure

2009-11-30

HISTORICAL

AS17852

This specification covers the requirements for two types of oxygen pressure reducers.

Standard

Transfilling and Maintenance of Oxygen Cylinders

2008-11-17

HISTORICAL

AIR1059B

The purpose of this document is to list the best available information and guidelines for the qualification of personnel who are responsible for the filling of fixed or portable aircraft oxygen cylinders.

Standard

Bibliography of References Pertaining to The Effects of Oxygen on Ignition and Combustion of Materials

2007-09-26

HISTORICAL

AIR1169B

The scope of this document is to provide a list of documents of types pertaining to the effects of oxygen on ignition and combustion of materials. Consolidating these references in one place makes it easier to find documents of this type as these references are difficult to locate.