Refine Your Search

Date

Date

Topic

Topic

Safety testing and procedures Crashworthiness Crashes Rotary-wing aircraft Agricultural vehicles and equipment A-20B Exterior Lighting Committee

Search Results

Viewing 1 to 16 of 16
1
Sort by published
Standard

Design Requirements and Test Procedures for Dual Mode Exterior Lights
2023-02-20
CURRENT
ARP5825B
This SAE Aerospace Recommended Practice (ARP) contains the general requirements and test procedures for Dual Mode (NVIS Friendly visible and Covert) exterior lighting for most rotorcraft and fixed wing aircraft and could be applicable to ground vehicles that desire a Dual Mode lighting system.
Standard

Wing Inspection Lights - Design Criteria
2023-02-06
CURRENT
ARP4087D
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and engine nacelles and the upper surfaces of the wing. The addition of an ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit. It is not intended that this recommended practice require the use of any particular light source such as halogen, LED, or other specific design of lamp.
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2022-09-23
HISTORICAL
ARP6402A
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
Standard

Wing Inspection Lights – Design Criteria
2018-10-10
HISTORICAL
ARP4087C
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and engine nacelles and the upper surfaces of the wing. The addition of an ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit. It is not intended that this Recommended Practice require the use of any particular light source such as Halogen, LED or other specific design of lamp.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2018-08-13
CURRENT
AIR1106B
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
Standard

Minimum Performance Standard for Anticollision Light Systems
2017-08-24
CURRENT
AS8017D
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment anticollision light systems. This Aerospace Standard defines minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system. It is not intended that this standard require the use of any particular light source such as Xenon, LED or any other specific design of lamp.
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2011-06-21
HISTORICAL
ARP6402
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
Standard

Minimum Performance Standard for Anticollision Light Systems
2011-06-20
HISTORICAL
AS8017C
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment anticollision light systems. This Aerospace Standard defines minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system. It is not intended that this standard require the use of any particular light source such as Xenon, LED or any other specific design of lamp.
Standard

Wing Inspection Lights - Design Criteria
2006-09-12
HISTORICAL
ARP4087B
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and nacelles and the upper surfaces of the wing. The addition of ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit.
Standard

Landing and Taxiing Lights - Design Criteria for Installation
2006-06-28
HISTORICAL
ARP693C
This document includes requirements of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2004-02-05
HISTORICAL
AIR1106A
The scope of this Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgement in the many possible flight eventualities.
Standard

WING INSPECTION LIGHTS - DESIGN CRITERIA
1996-04-01
HISTORICAL
ARP4087A
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and nacelles and the upper surfaces of the wing.
Standard

LANDING AND TAXIING LIGHTS - DESIGN CRITERIA FOR INSTALLATION
1991-01-30
HISTORICAL
ARP693B
This SAE Recommended Practice includes requirements of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter
1
X