Search Results

Standard

Access Systems for Off-Road Machines

2016-08-02

J185_201608

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

Access Systems for Off-Road Machines

2015-01-08

J185_201501

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

Operator’s Field of View - Engineering Evaluation

2013-11-13

J2331_201311

This SAE Standard specifies a stationary test method for determining and documenting the masking effect caused by parts of the base machine with equipment as specified by the manufacturer within a visibility test circle around the eye position of a seated operator. It applies to earthmoving machinery which has a specific seated operator’s position.

Standard

Earthmoving Machinery - Operator’s Field of View

2013-11-13

J1091_201311

This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.

Standard

Operator Controls on Industrial Equipment

2013-07-09

J297_201307

This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.

Standard

Operator Controls - Off-Road Machines

2012-08-20

J1814_201208

General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine’s operator. The criteria are based upon physical limitations as defined by human factors engineering principles.

Standard

Access Systems for Off-Road Machines

2003-05-30

J185_200305

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

Human Physical Dimensions

2003-05-29

J833_200305

This SAE Recommended Practice defines the worldwide human physical dimensions to be used in construction, general purpose industrial, agricultural tractors, forestry and specialized mining machinery categories as defined in SAE J1116 JUN86.

Standard

Earthmoving Machinery—Operator’s Field of View

2003-03-30

J1091_200303

This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.

Standard

Operator Controls—Off-Road Machines

2003-03-12

J1814_200303

General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine's operator. The criteria are based upon physical limitations as defined by human factors engineering principles.

Standard

Operator’s Field of View—Engineering Evaluation

2002-12-20

J2331_200212

This SAE Standard specifies a stationary test method for determining and documenting the masking effect caused by parts of the base machine with equipment as specified by the manufacturer within a visibility test circle around the eye position of a seated operator. It applies to earthmoving machinery which has a specific seated operator’s position.

Standard

Operator Controls for Agricultural Wheeled Tractors

1999-01-29

J841_199901

These recommendations are intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on agricultural tractors. The controls covered are those centrally located at the operator's normal position.

Standard

OPERATOR’S FIELD OF VIEW—ENGINEERING EVALUATION

1996-11-01

J2331_199611

This SAE Standard specifies a stationary test method for determining and documenting the masking effect caused by parts of the base machine with equipment as specified by the manufacturer within a visibility test circle around the eye position of a seated operator. It applies to earthmoving machinery which has a specific seated operator’s position.

Standard

EARTHMOVING MACHINERY—OPERATOR’S FIELD OF VIEW

1996-11-01

J1091_199611

This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.

Standard

CONTROL LOCATIONS FOR OFF-ROAD WORK MACHINES

1994-10-01

J898_199410

This SAE Standard applies to Construction, General Purpose Industrial, Agricultural, Forestry, and Specialized Mining categories of off-road, self-propelled work machines, as defined in SAE J1116. Powered industrial trucks and agricultural equipment, other than the basic agricultural tractor, are excluded from the scope of this document. The document defines positions for convenient placement of hand- and foot-operated controls derived from the overlapping reach capability of large and small operators. The large operator approximates the 95th percentile male, and small operator approximates the 5th percentile female of the U.S. population.

Standard

OPERATOR CONTROLS—OFF-ROAD MACHINES

1993-02-01

J1814_199302

General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine's operator. The criteria are based upon physical limitations as defined by human factors engineering principles.

Standard

OPERATOR SPACE ENVELOPE DIMENSIONS FOR OFF-ROAD MACHINES

1992-06-01

J154_199206

This SAE Standard defines the minimum normal operating space envelope for clothed seated (SAE J899 seat configuration) and standing operators (95th percentile operator, SAE J833). This document applies to off-road, self-propelled work machines used in construction, general purpose industrial, agricultural, and forestry as identified in SAE J1116.

Standard

HUMAN PHYSICAL DIMENSIONS

1989-05-01

J833_198905

This SAE Recommended Practice defines the worldwide human physical dimensions to be used in construction, general purpose industrial, agricultural tractors, forestry and specialized mining machinery categories as defined in SAE J1116 JUN86.

Standard

ACCESS SYSTEMS FOR OFF-ROAD MACHINES

1988-06-01

J185_198806

Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions.

Standard

CONTROL LOCATIONS FOR OFF-ROAD WORK MACHINES

1987-10-01

J898_198710

This standard applies to Construction, General Purpose Industrial, Agricultural, Forestry and Specialized Mining categories of off-road, self-propelled work machines, as defined in SAE J1116 JUN86. Powered Industrial Trucks and Agricultural Equipment, other than the basic agricultural tractor, are excluded from the scope of this document.