Refine Your Search

Date

Date

Topic

Topic

Analysis methodologies Safety testing and procedures AGE-2 Air Cargo Humidity

Search Results

Viewing 1 to 20 of 34
12Next >Last >>
Sort by published
Standard

Interline Air Cargo Pallets
2023-01-13
CURRENT
AS1491B
This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
2020-09-29
CURRENT
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2019-10-02
CURRENT
AIR4165B
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
Standard

Environmental Degradation of Textiles
2019-04-24
CURRENT
AIR1490C
Since cargo restraint devices made with textiles should have a predictable service life, there should be data available so that predictions can be made. This document compiles available information on textiles of the types used in air cargo restraint devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and nonstructural containers, restraint nets installed in cargo aircraft, and similar applications.
Standard

Aircraft On Board Weight and Balance System Requirements
2018-10-18
CURRENT
ARP1409C
This SAE Aerospace Recommended Practice (ARP) establishes requirements for the function, characteristics, and installation of an aircraft On Board Weight and Balance System (OBWBS) for use on civil transport aircraft. This document is not intended to specify design methods, mechanisms, or material to accomplish the requirements set forth.
Standard

Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents
2018-10-18
CURRENT
AIR36106A
This SAE Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100A, published 2006-04 [TSO pending], as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2018-10-18
CURRENT
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2017-05-08
CURRENT
AS5385D
This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Environmental Degradation of Textiles
2013-08-12
HISTORICAL
AIR1490B
Since the ULD device containing textiles should have a predictable service life, there should be data available so that predictions can be made. This document compiles available information on textiles of the types used in air cargo ULD devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and nonstructural containers, restraint nets installed in cargo aircraft, and similar applications.
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2013-08-06
HISTORICAL
AS6453
This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2012-11-26
HISTORICAL
AS5385C
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22,250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2012-11-01
HISTORICAL
AIR4165A
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
Standard

Interline Air Cargo Pallets
2012-09-05
HISTORICAL
AS1491A
This document establishes dimensional, structural and environmental requirements for two types of interline pallets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.
Standard

Air Mode Active Containers Conditioning Performance
2010-11-15
CURRENT
ARP5741
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2008-06-22
HISTORICAL
AS1677C
This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.
Standard

GENERAL REQUIREMENTS FOR POWERED DRIVE UNITS IN AIRCRAFT CARGO SYSTEMS
2008-06-22
HISTORICAL
AIR4165
This Aerospace Information Report (AIR) serves a dual purpose. It enables the user (aircraft manufacturer/airline) to do the following: a To make a positive decision for the installation of a powered drive system in the cargo loading system during the definition of the aircraft on-board cargo loading system to be developed/procured. b To provide the user with general requirements to be taken into consideration during the preparation of component specifications for powered drive units (PDUs) to be used in aircraft cargo systems. This is to provide the author of such a component specification with a selection of criteria in order to obtain an optimum component suitable for the users’ applications.
Standard

Auto Transport Unit Load Device
2008-06-22
HISTORICAL
ARP1554C
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents
2006-03-21
HISTORICAL
AIR36106
This Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100 published 2005-02, as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2004-11-17
HISTORICAL
AS5385B
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
12Next >Last >>
X