Search Results

Standard

Cutting Edge - Double Bevel Cross Sections

2014-01-08

HISTORICAL

J738_201401

This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.

Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight

2011-10-25

CURRENT

J1581_201110

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

Cutting Edge - Cross Sections Loader Straight

2011-10-25

CURRENT

J1303_201110

For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85. NOTE—For some heavy duty applications, cross sections with larger blunts and greater bevel angles may be required.

Standard

Cutting Edge—Double Bevel Cross Sections

2008-07-07

HISTORICAL

J738_200807

This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.

Standard

Cutting Edge—Curved Grader

2006-02-05

HISTORICAL

J739_200602

This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.

Standard

Machine Slope Operation Test Code

2003-05-12

CURRENT

J897_200305

This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.

Standard

Excavator and Backhoe Hand Signals

2002-08-29

HISTORICAL

J1307_200208

This SAE Recommended Practice applies to mobile excavators, as defined in SAE J/ISO 6165, Earthmoving Machinery—Basic Types—Vocabulary, and backhoes as defined in SAE J326, Nomenclature Hydraulic Backhoes.

Standard

Drawbars--Crawler Tractor

2002-02-21

CURRENT

J749_200202

This SAE Standard provides recommended dimensions for drawbars for crawler tractors as defined in SAE J1057 (SEP88). It includes only those dimensions which will affect the attaching of towed equipment.

Standard

CUTTING EDGE—CURVED GRADER

1991-06-01

HISTORICAL

J739_199106

This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.

Standard

CUTTING EDGE—DOUBLE BEVEL CROSS SECTIONS

1986-06-01

HISTORICAL

J738_198606

This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.

Standard

CUTTING EDGE - CROSS SECTIONS LOADER STRAIGHT

1985-02-01

HISTORICAL

J1303_198502

For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85.

Standard

DRAWBARS - CRAWLER TRACTOR

1983-12-01

HISTORICAL

J749_198312

This recommended practice includes only those dimensions which will affect the attaching of towed equipment.