Refine Your Search

Date

Date

Topic

Topic

Metals Technical review Assembling Logistics A-6C1 Fluids and Contamination Control Committee Body structures

Search Results

Viewing 1 to 20 of 25
12Next >Last >>
Sort by published
Standard

Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft
2021-07-20
WIP
AS1241E
This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by the qualifying agency to demonstrate compliance with their specific requirements. The "qualifying agency" will be defined herein to be the airframe manufacturer submitting certification approval for use of the fluid in a specific model airplane. Fluids meeting the requirements of this specification may be approved by a qualifying agency for use on specific airplane models. Data used to show compliance to this specification can be used by the qualifying agency to show compliance to the applicable regulations for the appropriate certifying authority; e.g., FAA, EASA, etc.
Standard

Filter Element Cleaning Methods
2020-10-09
CURRENT
AIR787B
This SAE Aerospace Information Report (AIR) provides technical information to assist the development of specific cleaning methods for those filter elements which are designated as "cleanable" and cannot be cleaned by simple and obvious procedures.
Standard

Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft
2016-09-16
CURRENT
AS1241D
This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by the qualifying agency to demonstrate compliance with their specific requirements. The "qualifying agency" will be defined herein to be the airframe manufacturer submitting certification approval for use of the fluid in a specific model airplane. Fluids meeting the requirements of this specification may be approved by a qualifying agency for use on specific airplane models. Data used to show compliance to this specification can be used by the qualifying agency to show compliance to the applicable regulations for the appropriate certifying authority; e.g., FAA, EASA, etc.
Standard

Sensitization and Corrosion in Stainless Steel Filters
2014-02-06
CURRENT
AIR844B
This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.
Standard

Filter Element Cleaning Methods
2013-10-08
HISTORICAL
AIR787A
This SAE Aerospace Information Report (AIR) provides technical information to assist the development of specific cleaning methods for filter elements. Consideration is limited to filter elements which are designated as "cleanable" (not "disposable"), but which cannot be cleaned by simple and obvious procedures. Cleaning methods developed according to this report should be evaluated by the methods of ARP725. Satisfactory cleaning methods can be developed for most "cleanable" filter elements. Technical or economic feasibility of the cleaning method may be limited, however, by incompatibility of filter-element construction materials, by mechanical weakness or lack of corrosion resistance to withstand repeated or continued cleaning, or by the presence of unusually tenacious contamination. These factors must be considered when selecting approaches to the development of specific methods.
Standard

Secondary Filters for Fluid System Reliability
2012-09-24
CURRENT
AIR4057B
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Sensitization and Corrosion in Stainless Steel Filters
2008-06-04
HISTORICAL
AIR844A
This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.
Standard

Secondary Filters for Fluid System Reliability
2004-12-01
HISTORICAL
AIR4057A
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Aerospace Fluid Power - Cleanliness Classification for Hydraulic Fluids
2000-08-01
HISTORICAL
AS4059C
This SAE Aerospace Standard (AS) defines cleanliness levels for particulate contamination of hydraulic fluids and includes methods of reporting data relating to the contamination levels. The contamination levels selected are an extension of the widely accepted NAS 1638 cleanliness levels.
Standard

Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft
1997-09-01
HISTORICAL
AS1241C
This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by procuring agencies to demonstrate compliance with specific requirements.
Standard

AEROSPACE-CLEANLINESS CLASSIFICATION FOR HYDRAULIC FLUIDS
1995-03-01
HISTORICAL
AS4059B
This SAE Aerospace Standard (AS) defines cleanliness levels for particulate contamination of hydraulic fluids and includes methods of reporting data relating to the contamination levels. The contamination levels selected are an extension and simplification of the widely accepted NAS 1638.
Standard

SECONDARY FILTERS FOR FLUID SYSTEM RELIABILITY
1994-05-01
HISTORICAL
AIR4057
It discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

PARTICLE COUNT DATA CONVERSION AND EXTRAPOLATION
1993-01-01
HISTORICAL
AIR877
This report describes a mathematical model which can be used to analyze particle count data. Particle counts which fit the model can be graphically displayed. converted from one counting size-frequency range to another, and extrapolated to estimate counts beyond the measured range. Derivation, applications and calculations are described.
Standard

FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
1992-02-18
HISTORICAL
AS1241B
This document establishes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required. Additional tests may be specified by procuring agencies to demonstrate compliance with specific requirements.
Standard

FILTER-ELEMENT CLEANING METHODS
1991-11-01
HISTORICAL
AIR787
This Aerospace Information Report provides technical information to assist the development of specific cleaning methods for filter elements. Consideration is limited to filter elements which are designated as "cleanable" (not "disposable"), but which cannot be cleaned by simple and obvious procedures. Cleaning methods developed according to this report should be evaluated by the methods of ARP 725 and ARP 849. Satisfactory cleaning methods can be developed for most "cleanable" filter elements. Technical or economic feasibility of the cleaning method may be limited, however, by incompatibility of filter-element construction materials, by mechanical weakness or lack of corrosion resistance to withstand repeated or continued cleaning, or by the presence of unusually tenacious contamination. These factors must be considered when selecting approaches to the development of specific methods.
Standard

AEROSPACE-CLEANLINESS CLASSIFICATION FOR HYDRAULIC FLUIDS
1990-03-30
HISTORICAL
AS4059A
This SAE Aerospace Standard defines cleanliness levels for particulate contamination of hydraulic fluids and includes methods of reporting data relating to the contamination levels. The contamination levels selected are an extension and simplification of the widely accepted NAS 1638.
12Next >Last >>
X