Search Results

Standard

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

2021-05-06

CURRENT

J1095_202105

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters ranging from 165.1 to 335.0 mm (6.500 to 13.189 inches). It is up to each hub and/or wheel for demountable rims manufacturer to determine the appropriate test method, accelerated load factor and cycle life requirements applicable to obtain satisfactory service life for a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters as necessary to ensure satisfactory service life for the intended application. It should be noted that this test procedure focuses on fatigue resulting from vehicle loading and cornering forces.

Standard

Disc Wheel and Hub or Drum Interface Dimensions - Truck and Bus

2021-04-30

CURRENT

J694_202104

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for truck and bus applications. Disc wheels designed only for single wheel applications (not dual wheels) for light trucks and special or less common applications are not covered in this document.

Standard

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

2016-06-30

HISTORICAL

J1095_201606

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.500 to 13.189 in). It is up to each hub and/or wheel for demountable rims manufacturer to determine what test method, accelerated load factor and cycle life requirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters to obtain satisfactory service life.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2013-05-23

CURRENT

J179_201305

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2012-09-27

HISTORICAL

J179_201209

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2011-04-14

HISTORICAL

J179_201104

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Disc Wheel Radial Runout Low Point Marking

2010-02-15

HISTORICAL

J2133_201002

This SAE Recommended Practice provides for standardized steel disc wheel radial runout low point marking. This marking is used for match-mounting tires on wheels to minimize assembly radial force variation. It applies to tubeless 15 degree drop center disc wheels for use on class 5, 6, 7, and 8 commercial vehicles.

Standard

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

2009-10-12

HISTORICAL

J1095_200910

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). It is up to each hub and/or wheel for demountable rims developer to determine what test method, accelerated load factor and cycle life requirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters to obtain satisfactory service life.

Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging

2008-07-17

HISTORICAL

J2224_200807

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.

Standard

Disc Wheel/Hub or Drum Interface Dimensions—Truck and Bus

2007-06-21

HISTORICAL

J694_200706

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.

Standard

Labeling—Disc Wheels and Demountable Rims—Trucks

2007-02-21

HISTORICAL

J179_200702

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Spoke Wheels and Hub Fatigue Test Procedures

2003-03-07

HISTORICAL

J1095_200303

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). It is up to each hub and/or spoke wheel developer to determine what test method, accelerated load factor and cycle life requirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or spoke wheel developer to modify other parameters to obtain satisfactory service life.

Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging

2002-05-31

HISTORICAL

J2224_200205

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.

Standard

Labeling—Disc Wheels and Demountable Rims—Trucks

2001-07-31

HISTORICAL

J179_200107

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Disc Wheel/Hub or Drum Interface Dimensions—Commercial Vehicles

2001-02-22

HISTORICAL

J694_200102

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.

Standard

Wide Base Disc Wheels and Demountable Rims

2000-04-26

HISTORICAL

J876_200004

This SAE Recomended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheels and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware.

Standard

Disc Wheel/Hub or Drum Interface Dimensions—Commercial Vehicles

1998-08-01

HISTORICAL

J694_199808

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.

Standard

DISC WHEEL/HUB OR DRUM INTERFACE DIMENSIONS—COMMERCIAL VEHICLES

1997-07-01

HISTORICAL

J694_199707

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.

Standard

SPOKE WHEELS AND HUB FATIGUE TEST PROCEDURES

1995-03-01

HISTORICAL

J1095_199503

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). The tests described in this document are not to be construed as the only tests required or permitted to ensure that a spoke wheel or a hub will perform satisfactorily for its intended use.

Standard

IDENTIFICATION OF TRUCK, TRAILER, AND BUS WHEEL SEALS AND ASSOCIATED PACKAGING

1994-10-01

HISTORICAL

J2224_199410

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.