Search Results

Standard

Plastic: Polyimide for Molded Rod, Bar, and Tube, Plaque, and Formed Parts

2022-09-30

CURRENT

AMS3644H

This specification covers a polyimide plastic in the form of isostatically molded rod, bar, and tube, unidirectionally molded plaque, and direct formed parts.

Standard

Surface Treatment of Polytetrafluoroethylene (PTFE) Preparation for Bonding

2022-07-19

CURRENT

AMS2491G

This specification covers the engineering requirements for preparing surfaces of both virgin and filled polytetrafluoroethylene (PTFE) materials for bonding and the properties resulting from the treatment.

Standard

Adhesive, Electrically Conductive Silver-Filled Epoxy Resin

2019-03-28

CURRENT

AMS3681F

This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.

Standard

Adhesive, Electrically Conductive Silver-Filled Epoxy Resin

2017-07-13

HISTORICAL

AMS3681E

This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.

Standard

Film, Copper Clad Polyester

2016-11-18

CURRENT

AMS3613E

This specification covers a polyester resin in the form of a film clad on one or both sides with copper foil.

Standard

Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150 °C (302 °F) Cure

2016-11-17

CURRENT

AMS3136F

This specification covers a pigmented phenolic-resin-base coating material, filled with polytetrafluoroethylene (PTFE), supplied in kit form.

Standard

Resin Polyurethane, Foam-In-Place, Rigid

2016-10-13

CURRENT

AMS3572C

This specification covers polyurethane systems consisting of an isocyanate component and other components containing a polyol and other ingredients which, when mixed and cured, produce thermosetting, rigid, cellular products.

Standard

Foam, Rigid, Structural, Closed Cell

2016-09-01

CURRENT

AMSPRF46194B

This specification covers rigid, structural, closed cell foam (see 6.1).

Standard

Adhesive, Electrically Conductive Silver-Filled Epoxy Resin

2016-08-24

HISTORICAL

AMS3681D

This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.

Standard

Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive

2016-07-12

CURRENT

AMS3807C

This specification covers aluminum foil tape with a pressure sensitive adhesive.

Standard

Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Foil/Glass Cloth

2016-07-12

CURRENT

AMS3779/1B

This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.

Standard

Paper, Recording, Heat Sensitive

2016-07-06

CURRENT

AMSP22968A

This specification presents the requirements for one type of a heat-sensitive recording paper, in roll form, that furnishes permanent marking or tracing on one side.

Standard

Tape and Sheet, Adhesive, Rubber and Cork Composition

2016-07-06

CURRENT

AMST6841A

This specification covers one type of tape and sheet for use in the installation of windshields, panels, and windows in cabins and cockpits of aircraft.

Standard

Shims, Molded, Filled Resin Compound and Sheet Prepeg

2016-07-06

CURRENT

AMSS83474B

This specification covers the requirements for filled, resinous thermosetting compound and sheet pre-preg to fabricate shims for use during assembly of aircraft and marine components and parts.

Standard

Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

2016-02-29

CURRENT

AMS3678/14A

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 40% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

2016-02-29

CURRENT

AMS3678/6B

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 60% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Type 12 10% Mineral, 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

2016-02-29

CURRENT

AMS3678/12A

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 10% mineral and 2.5% molybdenum disulfide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings

2016-02-29

CURRENT

AMS3678/9C

This specification covers a polytetrafluoroethylene (PTFE) resin filled with inorganic pigment in the form of molded rods or tubes which are sintered after molding. The blue colored material is designated for use in rod glands only and the yellow colored material is designated for use in piston glands only. The brown colored material is designated for use in AS5857 rod glands only and the green colored material is designated for use in AS5857 piston glands only.

Standard

Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled

2016-02-29

CURRENT

AMS3678D

This specification covers several grades of virgin polytetrafluoroethylene (PTFE) resin which may be compounded with pigment and fillers in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

Standard

Plastic Sheet and Film, Vinyl Copolymers Unplasticized

2015-05-13

CURRENT

AMS3529B

This specification covers an unpigmented grade of vinyl plastic, unfilled and not containing plasticizer, in the form of sheet and film.