Refine Your Search

Date

Date

Fasteners Ferrous metals Diesel Fuel Injection Equipment Standards Committee Logistics

Search Results

Viewing 1 to 20 of 20
1
Sort by published
Standard

Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
2015-11-24
CURRENT
J1958_201511
This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.
Standard

Diesel Fuel Injector Assembly—Types 8, 9, 10, and 11
2002-12-13
HISTORICAL
J265_200212
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.
Standard

Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6
2002-12-13
HISTORICAL
J629_200212
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
Standard

Diesel Fuel Injector Assembly Type 7 (9.5 mm)
2002-10-25
HISTORICAL
J347_200210
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

Diesel Engines—Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
2002-10-25
HISTORICAL
J1958_200210
This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.
Standard

Diesel Fuel Injector Assembly Type 28 (9.5 mm)
2002-10-25
HISTORICAL
J1984_200210
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

Calibration Fluid for Diesel Injection Equipment
2002-08-29
HISTORICAL
J967_200208
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM)
1995-11-01
HISTORICAL
J1984_199511
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE (9.5 MM)
1995-07-10
HISTORICAL
J347_199507
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY—TYPES 8, 9, 10, AND 11
1991-04-01
HISTORICAL
J265_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.
Standard

DIESEL FUEL INJECTOR ASSEMBLY - FLANGE MOUNTED TYPES 5 AND 6
1991-04-01
HISTORICAL
J629_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 27 (9.5 mm)
1989-11-01
HISTORICAL
J1984_198911
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

ROAD VEHICLES—HIGH PRESSURE FUEL INJECTION PIPE END—CONNECTIONS WITH 60 DEGREE FEMALE CONE
1988-10-01
HISTORICAL
J1949_198810
This SAE Standard specifies the dimensional requirements for the assembly of high-pressure pipe connections for compression-ignition (diesel) engine fuel injection equipment. It applies to 60 degrees female cones with external threaded connectors types 1 and 2 (see Figures 1, 2, and 3), and to the internal threaded tube nuts and male cone type end assembly (see Figure 4) of high-pressure pipe connections for tubes with diameters up to 12 mm inclusive.
Standard

CALIBRATION FLUID FOR DIESEL INJECTION EQUIPMENT
1988-09-01
HISTORICAL
J967_198809
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 7 (9.5 mm)
1988-07-01
HISTORICAL
J347_198807
This standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
1
X