Standard
WRENCHING CONFIGURATION EXTERNAL MORTORQ® SUPER SPIRAL BOLT HEAD
2022-10-07
AS6315
Search Results
Standard
Lubricant, Solid Film
2022-04-01
AS1701F
This document covers the performance requirements for solid dry film lubricants, air dried or heat cured, for use in aerospace applications. These lubricants are intended to prevent galling, and may be capable of remaining effective for extended periods of time after exposure to extreme environmental conditions.
Standard
Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of
2021-09-10
AS567L
This SAE Aerospace Standard (AS) covers devices whose primary function is the retention of fasteners, except for such devices that are integral with the item being retained.
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3750-24 UNJF-3A
2021-08-17
AS9699C
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, 160 KSI UTS MIN, TI 6Al-4V (UNS R56400), .3125-24 UNJF-3A
2021-04-07
AS9761B
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, TI 6Al-4V (UNS R56400), .2500-28 UNJF-3A
2021-04-07
AS9760B
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL UNS G87400 CADMIUM PLATED, .5625-18 UNJF-3A
2021-04-06
AS9947C
Standard
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
2021-04-05
AS5272F
This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film lubricants. For other general or high temperature applications, refer to AS1701. This document requires qualified products.
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
2020-12-22
AS9924C
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, (UNS G87400), 125 KSI MIN, .1900-32 UNJF-3A
2020-12-22
AS9923C
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A
2020-12-21
AS9565D
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .1900-32 UNJF-3A
2020-12-03
AS9741D
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A
2020-11-12
AS9112C
Standard
SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A
2020-09-29
AS9712B
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS4967 (TI 6AL-4V), .1900-32 UNJF-3A
2020-09-09
AS9759B
Standard
WASHER, KEY - 180 DEG, LOCKING, CRES, UNS S32100
2019-08-15
AS9276B
Standard
WASHER, KEY - 90 DEG, LOCKING, CRES, UNS S32100
2019-08-15
AS9581B
Standard
Installation Procedures - Pin/Plug Expansion Type
2019-08-15
AIR3277
Standard
Shaft Nut and Keywasher Installation Dimensions for
2019-07-29
AS1495B
The purpose of this Standard is to provide installation dimensions for shaft nuts and their companion keywasher. The Standard type typically shown on MS9951 and MS9952, but is also suitable for parts which are dimensionally equivalent.
Standard
Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements
2019-07-01
AS5133A
This specification establishes the procedure for installing self-locking, floating, attached retention element (A.R.E.) nut assemblies and defines the necessary hole preparation.
