Search Results

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2023-01-17

AS5528F

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

WRENCHING CONFIGURATION EXTERNAL MORTORQ® SUPER SPIRAL BOLT HEAD

2022-10-07

AS6315

Standard

STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 UNS X .3750 - 24 UNF-3A

2022-06-02

AS126587C

Standard

Lubricant, Solid Film

2022-04-01

AS1701F

This document covers the performance requirements for solid dry film lubricants, air dried or heat cured, for use in aerospace applications. These lubricants are intended to prevent galling, and may be capable of remaining effective for extended periods of time after exposure to extreme environmental conditions.

Standard

STUD - STRAIGHT, CADMIUM PLATED, STEEL, SAE 8740, 125 KSI MIN, .3125-18UNS-3A X .3125-24 UNF-3A

2021-08-17

AS126275D

Standard

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification

2021-04-05

AS5272F

This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film lubricants. For other general or high temperature applications, refer to AS1701. This document requires qualified products.

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2020-08-03

AS5528E

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2020-03-10

AS5528D

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

Installation Procedures - Pin/Plug Expansion Type

2019-08-15

AIR3277

Standard

Boss - Plug/Pin, Expansion Type Hole Preparation

2019-08-15

AIR3276

Standard

Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements

2019-07-01

AS5133A

This specification establishes the procedure for installing self-locking, floating, attached retention element (A.R.E.) nut assemblies and defines the necessary hole preparation.

Standard

Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures

2019-07-01

AS4389A

This SAE Aerospace Standard (AS) provides minimum design, hole preparation, installation and removal requirements for AS3272, AS3273, MA3274, and MA3275 serrated shank self-locking clinch nuts. This standard is applicable when specified on engineering drawings or in procurement documents.

Standard

Groove Design - Metal Face Seal

2019-06-06

AIR1108A

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Insert - Thin Wall, Self-Locking, Metric Short and Long Length Installation and Removal of

2019-03-18

MA4811A

This SAE Metric Aerospace Standard (MA) provides minimum design, installation, and removal requirements for MA3520 and MA3521 thin wall inserts and is applicable when specified on engineering drawings or in procurement documents.

Standard

Screw Threads, Metric Buttress - MJB Profile

2019-01-03

MA1696B

This standard establishes the basic triangular profile for the MJB thread form, the design profiles, standard pitches, tolerance classes, formulae for tolerances and dimensions, tolerance tables, and a system of designations. Because of the specialized application for buttress threads, no preferred diameter-pitch series have been established for this standard and each application will require use of the thread formulae for dimensions and related tolerances given herein for deriving the thread dimensional requirements.

Standard

Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

2018-10-26

AS3071C

To establish the acceptance criteria for discontinuities as revealed by magnetic particle or liquid penetrant examination of aircraft utility parts as in 1.2.

Standard

STUD, LOCKED IN-RING LOCKED, SERRATED

2018-09-28

AS51989C

Standard

Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines

2018-09-11

ARP246D

Orientation of the engine, engine axis and coordinate system referred to herein shall be the conventional terminology used in all references to aircraft gas turbine engines.

Standard

Modules and Basic Racks of Metric Spur and Helical Gears

2018-09-11

AS1560B

This SAE Aerospace Standard (AS) establishes the standard modules for aerospace metric involute gear teeth and establishes the tooth dimensions of aerospace metric involute gear teeth in terms of the conjugate rack type cutter whose counterpart reference profile is called the basic rack profile of the generated gear, having the tooth dimensions expressed in terms proportional to the module.

Standard

Operating Instructions for Aircraft Engines (Preparation of)

2018-09-11

AS177C

This specification covers the requirements for format and outline of contents of operating instructions in published form or in manuscript form suitable for publication.