Standard
Magnesium Alloy Welding Wire, 9.0Al - 2.0Zn (AZ92A)
2024-05-17
CURRENT
AMS4395G
This specification covers a magnesium alloy in the form of welding wire (see 8.5).
Search Results
Standard
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of
2024-05-09
CURRENT
ARP1947D
This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).
Standard
Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed
2023-08-01
CURRENT
AMS4080R
This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).
Standard
Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed
2023-05-10
CURRENT
AMS4071P
This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).
Standard
Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range
2023-01-17
CURRENT
AMS4772L
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
Standard
Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged
2022-12-16
CURRENT
AMS4365A
This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.5).
Standard
Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed
2022-08-05
CURRENT
AMS4011E
This specification covers aluminum in the form of foil and light gage sheet.
Standard
Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged
2022-04-25
CURRENT
AMS4354A
This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).
Standard
Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged
2021-09-15
CURRENT
AMS4364A
This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)
2021-05-21
CURRENT
AMSQQA250/24C
This specification covers the specific requirements for aluminum alloy 7075 plate and sheet for applications requiring improved exfoliation resistance.
Standard
Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)
2020-08-25
CURRENT
AMS4117L
This specification covers an aluminum alloy in the form of rolled or cold-finished bars, rods, and wire, and of flash welded rings and stock for flash welded rings.
Standard
Brass Tubing, Seamless 66.5Cu - 33Zn - 0.45Pb Annealed
2019-08-06
CURRENT
AMS4554C
This specification covers one grade of brass in the form of seamless tubing.
Standard
Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat Treated
2018-09-19
WIP
AMS4289A
This specification covers an aluminum alloy in the form of castings.
Standard
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of
2018-08-22
HISTORICAL
ARP1947C
This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50000 psi (345 MPa).
Standard
Heat Treatment of Magnesium Alloy Castings
2018-05-03
CURRENT
AMS2768C
This specification covers the engineering requirements for heat treatment of magnesium alloy castings and for parts machined from castings.
Standard
Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52Co - 0.28Si Solution Heat Treated (TB00)
2018-01-02
CURRENT
AMS4890D
This specification covers a copper-beryllium alloy in the form of sand, investment, or centrifugal castings.
Standard
Aluminum Alloy, Plate, 7.9Zn – 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged
2017-06-29
HISTORICAL
AMS4365
This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.4).
Standard
Solder, Tin-Lead 45Sn - 55Pb
2017-04-07
CURRENT
AMS4750E
This specification covers a tin-lead solder in the form of wire, strip, bars, and pigs.
Standard
Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg – 0.25Cr (5052-O) Annealed
2017-02-14
HISTORICAL
AMS4071N
This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm) inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).
