Refine Your Search

Date

Date

Topic

Topic

Fuels and Energy Sources Assembling AMS K Non Destructive Methods and Processes Committee Steel

Search Results

Viewing 1 to 20 of 38
12Next >Last >>
Sort by published
Standard

Ultrasonic Inspection Thin Wall Metal Tubing
2022-06-20
CURRENT
AMS2634C
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2021-11-09
CURRENT
AMS2630E
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Exposure Levels of UV Radiation in Nondestructive Inspection Processes
2019-08-05
CURRENT
AIR4964
Long wave ultraviolet or UV-A radiation (between 320 to 400 nm) is used for fluorescent inspections in magnetic particle and liquid penetrant examinations. The UV-A radiation is obtained from either fluorescent or high intensity discharge lamps that are stationary or portable. The commercially available UV-A lamps possess a large variation in intensity output that can cause a legitimate concern for possible health hazard. This draft reviews the nature of UV-A radiation emitted by these lights, blacklight equipment, acceptable UV dosage limits adopted by the American Conference of Governmental Industrial Hygienists (ACGIH) and the European Standards Committee for Nondestructive Testing, and recommendation of proper practices when working with UV-A radiation.
Standard

Inspection Process, Magnetic Rubber
2016-01-06
CURRENT
AMSI83387B
This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.
Standard

Image Quality Indicator Radiographic
2012-05-22
CURRENT
AS1613B
This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.
Standard

IMAGE QUALITY INDICATOR Radiographic
2010-11-01
HISTORICAL
AS1613A
This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2010-01-05
HISTORICAL
AMS2630C
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection Process, Magnetic Rubber
2009-07-10
HISTORICAL
AMSI83387A
This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.
Standard

Oil Fluorescent Penetrant, High Fluorescence, Solvent Soluble
2009-01-08
CURRENT
AMS3157D
CANCELLATION NOTICE This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of January 2009 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3157. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Oil, Fluorescent Penetrant, Water Washable
2008-12-15
CURRENT
AMS3156E
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3156. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Oil, Fluorescent Penetrant, Solvent-Soluble
2008-12-15
CURRENT
AMS3155E
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3155. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2008-10-22
HISTORICAL
AMS2630B
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
12Next >Last >>
X