Standard
Webbing, Tubular, Low-Modulus Aramid-54
2018-07-31
AMS3799D
This specification covers a low-modulus aramid in the form of tubular webbing.
Search Results
Standard
Powder, Fumed Silicon Dioxide
2016-11-18
AMS3755D
This specification and its supplementary detail specifications cover silicon dioxide in the form of a white, amorphous powder.
Standard
Resin Polyurethane, Foam-In-Place, Rigid
2016-10-13
AMS3572C
This specification covers polyurethane systems consisting of an isocyanate component and other components containing a polyol and other ingredients which, when mixed and cured, produce thermosetting, rigid, cellular products.
Standard
Wipes, Cotton, Loosely Woven
2016-09-20
AMS3803A
This specification covers a loosely-woven cotton in the form of wipes supplied in rolls or cut sheets.
Standard
Foam, Rigid, Structural, Closed Cell
2016-09-01
AMSPRF46194B
This specification covers rigid, structural, closed cell foam (see 6.1).
Standard
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive
2016-07-12
AMS3807C
This specification covers aluminum foil tape with a pressure sensitive adhesive.
Standard
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant
2016-07-12
AMS3779B
This specification and its supplementary detail specifications cover thermal radiation resistant materials in the form of tape with pressure-sensitive adhesive.
Standard
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Coated Glass Cloth
2016-07-12
AMS3779/2B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
Standard
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Foil/Glass Cloth
2016-07-12
AMS3779/1B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
Standard
Paper, Recording, Heat Sensitive
2016-07-06
AMSP22968A
This specification presents the requirements for one type of a heat-sensitive recording paper, in roll form, that furnishes permanent marking or tracing on one side.
Standard
Shims, Molded, Filled Resin Compound and Sheet Prepeg
2016-07-06
AMSS83474B
This specification covers the requirements for filled, resinous thermosetting compound and sheet pre-preg to fabricate shims for use during assembly of aircraft and marine components and parts.
Standard
Fixant, Hold Down
2016-06-29
AMSF24610A
This specification covers the requirements for a film-forming liquid hold down fixant. The hold down fixant solution shall consist of compounds as required, to conform to the requirements specified herein.
Standard
Adhesive, Acrylic Base, for Acrylic Plastic
2016-06-29
AMSA8576A
This specification covers acrylic-monomer base adhesives intended for use in bonding acrylic plastics.
Standard
Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion
2016-06-15
AMS3812C
This specification covers coated round rods manufactured by the pultrusion process from glass fiber roving and a weather-resistant polyester resin binder in the form of straight lengths or in coils.
Standard
Rods, Aramid Fiber, Polyester Resin Coated Pultrusion
2016-06-15
AMS3811C
This specification covers coated round rods fabricated by the pultrusion process from aramid fibers and a weather-resistant polyester resin binder in the form of straight lengths or in coils.
Standard
Webbing, Nylon, Aircraft Arresting
2016-06-09
AMS3796B
This specification and its supplementary detail specifications cover two types of nylon and one type of nylon/polyester in the form of webbing.
Standard
Webbing, Woven Nylon Fabric
2016-06-09
AMS3795B
This specification and its supplementary detail specifications cover three types of nylon in the form of webbing.
Standard
Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
2016-02-29
AMS3678/2B
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% graphite in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
Standard
Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
2016-02-29
AMS3678/7B
This specification covers a polytetrafluoroethylene (PTFE) resin filled with carbon and graphite in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
Standard
Type 12 10% Mineral, 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
2016-02-29
AMS3678/12A
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 10% mineral and 2.5% molybdenum disulfide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
