Search Results

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2022-06-13

CURRENT

AMS3281G

This specification covers three types and three classes of fuel-resistant polysulfide sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

2020-03-18

CURRENT

AS5127/1D

This SAE Aerospace Standard (AS) describes test methods to determine the application and performance properties of two-component sealing compounds. It shall be used in conjunction with AS5127 and the applicable material specification. When modifications to these test methods are called out in material specifications, the material specification shall take precedence.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

2014-10-08

HISTORICAL

AS5127/1C

This SAE Aerospace Standard (AS) describes test methods to determine the application and performance properties of two-component sealing compounds. It shall be used in conjunction with AS5127 and the applicable material specification. When modifications to these test methods are called out in material specifications, the material specification shall take precedence.

Standard

Aircraft Sealant Removal Techniques

2012-01-17

CURRENT

AIR3270A

This SAE Aerospace Information Report (AIR) provides information on the possible methods of sealant removal. The discussion will focus on the methods of sealant removal and give the strengths and weaknesses of each method.

Standard

Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures

2011-09-23

CURRENT

AMSS7124B

This specification covers compounds for sealing aircraft structure against the passage of air, liquids and vapors.

Standard

SEALING COMPOUND, ONE-PART SILICONE Aircraft Firewall

2011-08-09

HISTORICAL

AMS3374

This specification covers a one-part, high-temperature-resistant silicone sealing compound which cures to an elastomeric material upon exposure to air and is furnished in cartridges ready for extrusion. Acid is not given off during cure. A primer is required to achieve maximum adhesion.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

2009-09-28

HISTORICAL

AS5127/1B

This SAE Aerospace Standard (AS) describes test methods to determine the application and performance properties of two-component sealing compounds. It shall be used in conjunction with AS5127 and the applicable AMS material specifications.

Standard

Aircraft Sealant Removal Techniques

2008-01-16

HISTORICAL

AIR3270

This SAE Aerospace Information Report (AIR) provides information on the possible methods of sealant removal. The discussion will focus on the methods of sealant removal and give the strengths and weaknesses of each method.

Standard

Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)

2004-02-25

HISTORICAL

AMS3259A

This specification covers a polythioether sealing compound with nonchromated corrosion inhibitors supplied as a two-component system which cures at room temperature.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

2002-03-29

HISTORICAL

AS5127/1A

This standard describes test methods to determine the application and performance properties of two-component polysulfide or polythioether sealing compounds. It shall be used in conjunction with AS5127.

Standard

Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures

2001-08-01

HISTORICAL

AMSS7124A

This specification covers compounds for sealing aircraft structure against the passage of air, liquids and vapors.

Standard

Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures

1999-07-01

HISTORICAL

AMSS7124

This specification covers compounds for sealing aircraft structure against the passage of air, liquids and vapors.

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)

1999-03-01

HISTORICAL

AMS3281B

This specification covers three classes of fuel-resistant polysulfide (T) sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polythioether Integral Fuel Tanks and General Purpose, Fast Curing Intermittent Use to 360 °F (182 °C)

1999-01-01

HISTORICAL

AMS3277A

This specification covers two types and three classes of a fuel resistant polythioether sealing compound supplied as a two-component system.

Standard

Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use To 360 °F (182 °C)

1999-01-01

HISTORICAL

AMS3276C

This specification covers five classes of a fuel-resistant polysulfide (T) sealing compound supplied as a two-component system.

Standard

Sealing of Integral Fuel Tanks

1998-05-01

HISTORICAL

AIR4069A

This SAE Aerospace Information Report (AIR) presents preferred practices for sealing of aircraft integral fuel tanks, including rework of applied fuel tank seals. It addresses engineering designs for integral fuel tanks as they are currently found in practice; and this document discusses the most practical and conservative methods for producing a reliable, sealed system. Design preferences for optimum sealing are not within the scope of this document. Such discussions can be found in the Air Force sponsored handbook, entitled Aircraft Integral Fuel Tank Design Handbook, AFWAL-TR-87-3078. Key objectives of the fuel tank sealing process are to produce a sealing plane that is leak-free and corrosion resistant, especially at fastener locations, at environmental and operational conditions expected for the life of each air vehicle.

Standard

SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 °F (182 °C)

1998-03-01

HISTORICAL

AMS3276B

This specification covers five classes of a fuel-resistant polysulfide (T) sealing compound supplied as a two-component system.

Standard

TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS

1997-05-01

HISTORICAL

AS5127/1

This document describes test methods to determine the application and performance properties of two-component polysulfide or polythioether sealing compounds. It shall be used in conjunction with AS5127.

Standard

SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE For Aircraft Structures, Fuel Resistant With Intermittent Use To 400 °F (204 °C)

1997-03-01

HISTORICAL

AMS3263

This specification covers two classes of a fuel resistant polythioether sealing compound supplied as a two-component system.

Standard

SEALING COMPOUND, SPRAYABLE, For Integral Fuel Tanks and Fuel Cell Cavities, Intermittent Use to 350 °F (177 °C)

1997-03-01

HISTORICAL

AMS3279

This specification covers one type sprayable fuel resistant polythioether urethane sealing compound supplied as a two-component system.