Search Results

The higher load in heavy duty Diesel engines and the use of piston ring coatings with higher wear resistance cause more severe working conditions to the cylinder liners. In some cases, high localized wear occurs at the top dead center (TDC) of the first groove ring, where the loads and lubrication conditions are critical. It was studied the effect of the addition of hard particles on cylinder liner materials. The presence of these particles was obtained through the use of small quantities of strong carbide forming alloying elements: Vanadium, Niobium and Titanium. Cylinder liners with hard particle addition were tested in comparison to regular liners. This test used high sulfur fuel (> 1.0 wt %) and low additivation lubricant oil, maintaining the same ring pack configuration for both liners. The results showed sensible liner wear reduction at the TDC of the first ring without compromising the ring pack performance.

The application of multipiece oil control rings (two segments or rails and one expander) to Otto engines is very efficient and has been used for many years. However, development work to improve their performance, durability and manufacturing costs is desirable. The contoured segment is an alternative to reduce the variation of oil ring unit pressure during engine life. This paper shows the results of engine tests with this component, where nitrided segments with regular stainless steel expanders and nitrided expanders were used. The results showed satisfactory behaviour, with low wear between segments and nitrided expanders as well as between segments and the cylinder wall.