Search Results

We have developed Li-ion battery heating system which is direct resistance heating for hybrid electric vehicles (HEV), plug-in hybrid vehicles (PHEV) and electric vehicles (EV) by use of an inverter and a motor. One relay is added between a positive terminal of Li-ion battery and one-phase (e.g. U-phase) of a three-phase motor. When additional relay is turned on, the motor coils, IGBTs (Insulated-gate bipolar transistor) and diodes in the inverter and a smoothing capacitor for the inverter constitute buck-boost DC to DC converter. IGBTs are controlled to repeat charging and discharging between the battery and the smoothing capacitor. We made a system prototype and examined battery heating capability. And also we optimized charging and discharging frequency from impedance and current to improve heat generation. This method can increase battery temperature from −20 degrees C to 0 degrees C in 5 minutes and can extend EV driving range.

Inverter type electric compressors capable of providing cooling capability during engine stop and that do not cause fuel efficiency drop during air conditioning system use are recently being used in hybrid vehicles that have been drawing attention for their low fuel consumption and low emissions. Conventionally, the electric compressor inverter, like other high-voltage devices, was located in a cooling unit known as a power control unit (PCU) box because it requires cooling. However, inverter installation in the PCU box is subject to rigid installation constraints, and there is increasing need to integrate it with the electric compressors. In the present development, we adopted inverter-integrated construction in which the inverter is cooled using suction refrigerant etc., so as to make the electric compressor compact.

The environment is one of the most important issues currently facing the world and the automobile industry is required to respond with eco-cars. To meet this requirement, the hybrid vehicle is one of the most optimal solutions. The hybrid system automatically stops engine idling (idling stop), or stops the engine during deceleration to recover energy. The engine stop however creates a problem concerning the vehicle's climate control system. Because the conventional climate control system incorporates a compressor driven by engine belt, there is almost no cooling performance while the engine is stopped. Until now, when a driver needed more cooling comfort the engine has been switched back on as a compromise measure. To realize cabin comfort that is consistent with fuel saving, a 2-way driven compressor has been developed that can be driven both by engine belt while the engine is running and by electric motor when the engine is stopped.

In today's motorized society, various automotive technologies continue to evolve every day. Amid this trend, a new concept with respect to automatic transaxle gear-shifting has been developed. In order to materialize a new concept for shifting operation with a universal design in mind, a system has been developed: a shift-by-wire system developed specifically for hybrid vehicles. The greatest advantage of this new system is the lack of constraints associated with the conventional mechanical linkage to the transaxle. This allows freedom of design for the gear selection module. A revolutionary improvement in the ease of shifting has been realized by taking full advantage of this design freedom. In addition, this system contributes to an innovative design. For improved ease of operation, the operation force of the shift lever of this system has been dramatically reduced. For parking, the driver can engage the parking mechanism of the transaxle at the touch of a switch.

In the 42V Mild Hybrid System introduced into market by Toyota for the first time in the world, the crankshaft using belt(s) drives the motor/generator (MG). The set-up employs an inverter unit to control the MG electronically. This paper describes the system configuration, operations, characteristic features and development results of the new power control system. The focus is on the MG, the inverter-for-MG-control and energy regeneration, as well as DC/DC converter for the power supply to the 14V devices.