Search Results

In recent years, implementation of dual phase (DP) Advanced High Strength Steels (AHSS) and Ultra High Strength Steels (UHSS) is increasing in automotive components due to their superior structural performance and vehicle weight reduction capabilities. However, these materials are often sensitive to trimmed edge cracking if stretching along sheared edge occurs in such processes as stretch flanging. Tool wear is another major issue in the trimming of UHSS because of higher contact pressures at the interface between cutting tools and sheet metal blank caused by UHSS’s higher flow stresses and the presence of a hard martensitic in the microstructure. The objective of the present paper is to discuss the methodology of analyzing die wear for trimming operations of UHSS components and illustrate it with some examples of tool wear analysis for trimming 1.5mm thick DP980 steel.

Impact strength of pickup box floor panels is determined using a test called “The Drum Drop Test”. This drum drop test is one of the key verification requirements in the design of the pickup box floor panels. Non-linear CAE analysis is done in order to assess the performance of the pickup box design for this requirement. In this paper, a sensitivity study of various parameters that affect the performance of the pickup box floor panels is presented. Critical parameters are identified which would drive the design of the floor panels. This paper also highlights the weight reduction opportunity by using high strength steels for the design of floor panels.

Today, the interior noise perceived by the occupants is becoming an important factor driving the design standards for the design of most of the interior assemblies in an automotive vehicle. Buzz, Squeak and Rattle (BSR) is a major contributor towards the perceived noise of annoyance to the vehicle occupants. An automotive vehicle consists of many assemblies such as instrumentation panel, doors, sun/moon-roof, deck lids, hood, etc. which are the potential sources of BSR noise. The potential locations of critical BSR noise could be contained within such assemblies as well as across their boundaries. An extensive study is made regarding the overall structural behavior as well as their interaction under typical road loads to come up with enhanced design for improved quality from the BSR noise perspective. The alternative designs were comparatively evaluated for their relative noise level from buzz, squeak and rattle perspective using an analytical tool - N-hance.BSR.