Search Results

Currently, automobile manufacturers receive automotive headlamp assemblies from headlamp manufacturers with outer lenses produced of clear or slightly blue tinted polycarbonate. Such headlamp designed to provide optimized light output have very similar aesthetics, and leave little room to differentiate one car platform from another, using the outer lens color. With edge glow technology a car manufacturer can provide an appealing aesthetic look (edge glow effect) from the outer lens. Additionally, this technology can be used to improve the quality of the beam color emitted through the outer lens. Dependent on the chosen combination of halogen source and lens formulation, a range of beam colors spanning from halogen to HID is attainable, where the beam pattern and color continue to conform to the applicable SAE and ECE beam photometry and color standards and regulations.

OEM and Tier One integrated suppliers are in constant search of cockpit system components that reduce the overall number of breaks across smooth surfaces. Traditionally, soft instrument panels with seamless airbag systems have required a separate airbag door and a tether or steel hinge mechanism to secure the door during a deployment. In addition, a scoring operation is necessary to ensure predictable, repeatable deployment characteristics. The purpose of this paper is to demonstrate the development and performance of a cost-effective soft instrument panel with a seamless airbag door that results in a reduced number of parts and a highly efficient manufacturing process. Because of the unique characteristics of this material, a cost-effective, lightweight solution to meet both styling requirements, as well as safety and performance criteria, can be attained.

To determine what effect (measured in haze), UV exposure has on polycarbonate inner lenses (coated and uncoated), when positioned behind qualifying (UV absorbent) and non-qualifying (UV transmitting) outer lens materials (clear and red). Plastic inner lenses are those covered by another material and are not exposed directly to sunlight.

This paper will discuss, compare, and contrast current materials, designs, and manufacturing options for fuel filler doors. Also, it will explore the advantages of using conductive thermoplastic substrates over other materials that are commonly used in the fuel filler door market today. At the outset, the paper will discuss the differences between traditional steel fuel filler doors, which use an on-line painting process, and fuel filler doors that use a conductive thermoplastic substrate and require an in-line or off-line painting process. After reviewing the process, this paper will discuss material options and current technology. Here, we will highlight key drivers to thermoplastics acceptance, and look at the cost saving opportunities presented by the inline paint process option using a conductive thermoplastic resin, as well as benefits gained in quality control, component storage and coordination.

The evolution toward the use of electrostatic painting processes has been driven primarily by environmental legislation and efforts to improve efficiencies in the painting process. The development of conductive substrate material compliments the industry trend toward a green environment through further reductions in emissions of volatile organic compounds during the painting process. Traditionally, electrostatic painting of thermoplastics requires that a conductive primer be applied to the substrate prior to topcoat application. The conductive polymer blend of polyphenylene ether and polyamide provides sufficient conductivity to eliminate usage of conductive primers. Additional benefits include improved transfer efficiencies of the primer and top coat systems, uniform film builds across the part, and improved painting of complex geometries.

The luggage-rack-system market has historically been dominated by nylon- (polyamide)-based resins. The recent design and development of the Xterra® luggagerack system (LRS) from Nissan represents a new trend in luggage-rack system design. Nissan utilized an ASA/PC weatherable thermoplastic resin to develop its special gray, molded-in-color luggage-rack components. The balance of weathering performance and physical properties that ASA/PC resin offers allowed the automaker to design these structural components and avoid the high cost of paint. This paper discusses the design and development of the luggage-rack system as well as the process utilized to evaluate ASA/PC resin for performance in static loading, heat resistance, vibration performance, etc. Furthermore, the paper explores how ASA/PC resin parts might be designed in for future luggage-rack-system applications.

Electrostatic painting of exterior body components is considered standard practice in the automotive industry. The trend toward the use of electrostatic painting processes has been driven primarily because of environmental legislation and material system cost reduction efforts. When electrostatically painting thermoplastic body panels, side by side with sheet metal parts, it is imperative that the thermoplastic parts paint like steel. Electrostatic painting of thermoplastics has traditionally required the use of a conductive primer, prior to basecoat and clearcoat application. The use of conductive plastics eliminates the need for this priming step, while improving paint transfer efficiency and first pass yield. These elements provide an obvious savings in material and labor. The most significant benefit, is the positive environmental impact that occurs through the reduction in the emission of volatile organic compounds (VOC's).

Over the last decade, on small- and medium-size passenger cars, a new class of front bumper - injection or blow molded from engineering thermoplastics - has been put into production use. These bumper systems provide full 8-km/hr federal pendulum and flat-barrier impact protection, as well as angled barrier protection. Thermoplastic bumpers, offering weight, cost, and manufacturing advantages over conventional steel bumper systems, also provide high surface finish and styling enhancements. However, there remain questions about the durability and engineering applicability of thermoplastic bumper systems to heavier vehicles. This paper presents results of a preliminary study that examines the durability of thermoplastic bumpers drawn from production lots for much lighter compact, and mid-size passenger cars against baseline steel bumper systems currently used on full-size pickup truck and sport-utility vehicles (SUVs). Bumpers were subjected to U.S.

The formulation of injection moldable thermoplastics with small loadings of graphite nanotubes provides sufficient conductivity in molded parts to allow for use in electrostatic painting applications. Normally, plastic parts need to be painted with a conductive primer prior to the electrostatic painting of base and clear coats. The use of conductive plastics eliminates the need for the priming step, and improves paint transfer efficiency and first pass yield. These elements provide obvious savings in materials and labor. What is less obvious, however, is the dramatic positive environmental impact that can occur through the reduction in emissions of volatile organic compounds (VOCs). Graphite nanotube technology provides advantages over other technologies such as conductive carbon black. In order to reach the percolation threshold for conductivity in carbon-black-containing resins, the loading of carbon black required tends to embrittle the polymer.

Recent vehicle design trends require bumper systems to be crashworthy under more demanding circumstances, e.g. tighter package space, heavier vehicle mass, and wider rail spans. Meanwhile, pressure to reduce cost and weight of bumpers continues at a time when roles in the supplier community are changing. These factors have combined to increase the importance of optimizing bumper design and material properties for specific platforms. Materials suppliers have responded by developing a range of specialized engineering thermoplastic (ETP) resins that can help meet increasing performance requirements yet also offer the potential for improved manufacturing productivity, significant weight savings, and systems cost reductions. Material suppliers have also increased the level of technical design support provided to OEMs and 1st Tier suppliers.

Designers and engineers encounter many challenges in developing vehicles for the small-car market. They face constant pressure to reduce both mass and cost while still producing vehicles that meet environmental and safety requirements. At the same time, today's discriminating consumers demand the highest quality in their vehicles. To accommodate these challenges, OEMs and suppliers are working together to improve all components and systems for the high-volume small-car market. An example of this cooperative effort is a project involving an integrated structural instrument panel (IP) designed to meet the specific needs of the small-car platform. Preliminary validation of the IP project, which uses a compression-molded, glass-mat-thermoplastic (GMT) composite and incorporates steel and magnesium, indicates it will significantly reduce part count, mass, assembly time, and overall cost.

Traditional knee bolster designs consist of a first-surface plastic component covered by paint or vinyl skin and foam, with a subsurface steel plate that transfers knee loads to 2 steel crush brackets. The design was developed to meet FMVSS 208 and OEM requirements. More recently, technological developments have allowed for the steel plate to be replaced by a ribbed plastic structure, which offers cost and weight savings to the instrument panel system. However, it is still a hybrid system that combines plastic with the 2 steel crush brackets. This paper will detail the development of an all-plastic design, which consolidates the plastic ribbed reinforcement plate with the 2 steel crush cans in a single engineering thermoplastic component. The new system is expected to offer further cost and weight savings.

The August 1996 expansion of FMVSS 201 established head impact performance criteria for upper interior components This standard has forced automotive manufacturers, designers, and suppliers to change their thinking for interiors, especially pillars, compliance with FMVSS 201 will require new, structural designs and energy-absorbing materials An ongoing study has examined the implications of FMVSS 201 and its effect on pillars The results of this study have demonstrated how energy-absorbing engineering thermoplastics can be used to meet and exceed the requirements of the head impact legislation through single-piece pillar trims

Engineering thermoplastics are being used increasingly in automotive exterior body applications; most of these applications require that the panels be painted “on line” with the rest of the car body at relatively high temperatures. The high temperatures associated with the painting/conditioning of the car have been shown to cause dimensional stability problems on automotive fenders molded from NORYL GTX®. This paper contains the results of an extensive FEA investigation targeted at determining what factors cause dimensional problems in fenders exposed to high heat. The ABAQUS FEA software was used to perform computer simulations of the process and the C-PACK/W software was used to determine molded in stress values.

Thermoplastic body panels are emerging in the industry as automotive manufacturers seek to design for advanced aerodynamic styling, lower weight, and cost effective vehicles. To best exhibit the advantages of GE thermoplastic resins in these applications, an extensive study has been completed to demonstrate the impact performance of thermoplastic body panels in the field based on the current success with the Buick LeSabre T-Type, Buick Reatta, and the Cadillac Deville and Fleetwood models using NORYL GTX® 910 resin fenders. This study provides a “real life” scenario of the advantages of thermoplastics compared to steel in body panel applications.