Search Results

The development of fuel systems components are becoming challenging with the increasing use of Biofuels like Biodiesels and Ethanol around the world. Biodiesels are one of the most challenging fuels, once they can have multiple sources, which influences its characteristics, mainly the oxidization stability and peroxide levels. As the fuel characteristics changes along the time, the correct materials selection during the development phase is very important for the fuel system performance during the vehicle lifetime. One of the components most affected by the Biodiesel is the in tank fuel pump system. During the vehicle lifetime, it is exposed to all sorts of fuel and its contaminants and exposed to system stress factors like temperature and voltage variation. The wires insulation in the fuel pump systems are one of the most affected components.

The application of press hardening steels (PHS) Al-Si coating has been increasing in body in white vehicles as an approach to meet the demands of safety and CO2 reduction regulations. The vehicle structures with PHS largely depend on the integrity and the mechanical performance of the spots weld. During the spot welding process, intermetallic phase may appear in function of the chemical composition of the steel and coating. One of these intermetallics is the Fe-Al phase which brittleness decreases the strength of the weld joint. In this study, resistance spot welding (RSW) experiments were performed in order to evaluate the influence of the welding parameters of single-lap joints PHS - 22MnB5 steel grade.

The purpose of the theme developed in this work is to increase the volume of information related to vehicle evaluation and how human perception can be translated into numbers, thus facilitating the process of definitions, refinement and analysis of its performance. Based on the discipline of psychophysics, where it is possible to study the relationship between stimulus and sensation and the use of post processing tool known as PSD (Power Spectral Density), post process the acceleration data of inputs perceived by the occupants of the vehicle, when driving in routes considered ergodic. By this, in a summarized way, get to human subjective perception of comfort. This material shows in a conceptual way a sequence of studies that were conducted to make it possible, to generate a performance classification of the subjective vehicle attribute of Smoothness, by processing values of acceleration measured the driver's seat.

Vehicle ergonomics, more specifically driver ergonomics, has been the subject of interest in the automotive industry as a way to provide customers vehicles that have more than modern project, efficiency and competitive price. The driver ergonomics is related to the way the driver interacts with the vehicle interior, particularly, with the seat, hand and foot controls, considering aspects such as ease of access, space, proper upper and lower limb motion and drivers comfort and fatigue. Regarding the lower limbs, the driver’s comfort can be evaluated in terms of joint moments and muscle forces, which are influenced by the hip, knee and ankle joint angles, which in turn depend on the distances between the seat and pedal. Variations in seat to pedal horizontal or vertical distances will result in different angular positions and, consequently, different joint moments and muscle forces, which are associated to greater or lower muscular activations and greater or lower driver’s fatigue.

This paper explores the method of modeling and validation the computational tools able to accurately replicate the dynamic behavior of a Formula SAE vehicle. Based on limitations in conducting physical tests, it is possible to mathematically predict the forces and momentum generated on the steering column of the vehicle, minimizing effort and improving driver comfort even before the component physically manufactured. The results in permanent state due technical instrumentations were used in the physical vehicles and compared with other proposals (skid Pad test). As the software simulating the same path, it was possible to adopt values of speed and wheel steering, allowing compare the dynamics of the vehicle, through the signals from other sensors installed in the data acquisition system, validating the behavior of the models presented in permanent state. Other aspects were studied to understand vehicle behavior concerning lateral stability and steering behavior.

Drive a vehicle through corners is a very complex activity, since it means change of movement states. Considering a typical corner, the driver starts in a transient state, changes to a steady state and again changes to transient. Those variations make the vehicle change its behavior due specific suspension and steering characteristics. The idea of this paper is show how only one of those characteristics, the understeer gradient, have influence in the stability perception of the driver. The focus is show how the understeer gradient variation can induce perception of low stability in vehicle when cornering no matter the vehicle still keeps its correct path. This variation means an understeer gradient “acceleration”, the metric human being can perceive, in other words the feeling of stability or its lack of.

Vehicular manual transmissions systems often use a vent or breather to allow pressure control inside the main structure. This pressure variation comes along with differences caused by working temperature range. However along with air flow these vents may occasionally allow oil passage noticed by vehicle owner as a transmission leakage event. The more sophisticated the more expensive is the venting device which may contain membranes, labyrinths, baffles and other solutions to avoid leakage. The purpose of this paper is to present a simplified solution to avoid transmission fluid leakage by combining a regular sealing device (fiber concept gasket) and a baffle to avoid oil splash to reach the venting device. The proposed concept took into consideration a quick implementation aspect, low financial impact and less complexity to the overall current system modifying an existing component by adding secondary function instead of creating additional components.

Over recent years, demands for fuel-efficient vehicles have increased with the rise of the fuel price and public concerns on environment. Recently, application of lightweight materials is increasing in the automobile industry in order to improve mass reduction and consequently fuel efficiency. On this particular study, with a goal of developing a Lightweight Fixed Steering Column, it was identified an opportunity to replace fixed steering column metallic upper and lower brackets by polymeric material. In order to fulfill NVH, Crash, Durability and Performance requirements, a DFSS methodology has been applied. As a result, It was achieved ∼51% of mass reduction, ∼10% of performance improvement with ∼14% of cost increase.

Product Design is a process of creating new product by an organization or business entity for its customer. Being part of a stage in a product life cycle, it is very important that the highest level of effort is being put in the stage. The Design for Six Sigma (DFSS) methodology consists of a collection of tools, needs-gathering, engineering, statistical methods, and best practices that find use in product development. DFSS has the objective of determining the needs of customers and the business, and driving those needs into the product solution so created. In this paper the DFSS methodology is employed to develop the optimal solution to enhance sound transmission loss in a vehicle front of dash pass-through. An integrated approach using acoustic holography and beamforming Noise Source Identification (NSI) techniques is presented as a manner to improve sound insulation during vehicle development.

The Brazilian Automotive regulations that are aimed towards the safety of drivers, passengers and pedestrians have gone through recent changes to prevent and/or minimize injury and trauma from different types of accidents. Until now, National Traffic Council (CONTRAN) Resolution n° 14/98 required vehicles to only have safety belts for an occupant restraint system, and frontal airbags were not required. Since the recent CONTRAN n° 311/09 Resolution requires mandatory frontal airbags, the occupant restraint system must be tuned due to the interaction with different components that may make up the system, like safety belts with pretensioners and seatbelt load limiting devices. The present study was developed to optimize the restraint system of a current vehicle in production, while focusing on minimizing the vehicle complexity. The optimization tool helped to develop a robust restraint system for the frontal passenger during a frontal impact [1].

This work conducted an optimization in sheet metal blank's sizes for cold pressing automotive parts, comparing dimensional characteristics of automotive hood outer panels deep drawn with commonly used blank sizes for this process. As a result, it was possible to suggest modifications to smaller blank sizes, accordingly to the improvement accomplished in this work. The experimental study was conducted from observations in part's superficial aspects after its deep drawing process, which was realized in a commonly used tooling for automotive industry, with a blank's width reduction for the suggested case. The results showed a cost reduction opportunity based in this optimization.

The control of noise and vibrations using conventional damping materials is typically associated to mass penalties in a vehicle. A lightweight alternative employs piezoceramic materials connected in series to a resistor and an inductor (R-L circuit) to perform as mechanical vibration absorber, called piezoelectric resonator. In this paper, piezoelectric resonators are designed to attenuate vibration in a vehicle panel. The choice of design parameters, such as correct placement for the piezoelectric patches and the optimal electrical circuit values, is assisted by Finite Element simulation (FE) and theoretical analysis. Measurements of Sound Transmission Loss (STL) and modal analyses are conducted to demonstrate the efficiency of the proposed technique when compared to a conventional damping material.

The growing need to avoid failures in vehicle components have become the methods of quality control of manufacturing processes more efficient and accurate, especially in safety components like automotive wheels. The aim of this work is examines the efficiency of aluminum-silicon specifications related to wheel quality for avoiding the poor results obtained in impact and fatigue tests as result of improper settings in the chemical composition and manufacture process. It is evaluated mainly the content of magnesium in aluminum alloys and certified the correct degree of silicon modification in the microstructure on the performance of these wheels. The test results indicate that even with the chemical composition parameters specified by the standard, the technical validation of the product may not be adequate.

The automotive industry is spending a huge amount of money searching for new technologies, focused on cost reduction of product and/or process, quality improvements and nowadays aiming for environmental improvements. This paper shows a new technology applied to the automotive industry and a new development of production process of painting with chromed plate appearance. Chromed plate is a traditional electrolytically deposited chromium coating on the first surface of plastic components used in several automotive parts to improve the vehicle jewel effect, more often to differentiate luxury levels into a vehicle platform (in this case for top level vehicles), but with some dramatically important issues, such as: process scraps, part costs and heavy metals in their composition. This new technology is environmentally friendly chrome appearance (water-based without heavy metals), and has reduced costs, compared with the traditional process of chroming.

Manual steering is largely employed on emergent markets and it demands high level performance to be competitive. To achieve customer satisfaction, it is important to understand physically and be able to quantify what is good performance regarding imperative steering aspects. Nevertheless, global projects and quality management require objective measurements and reference numbers. The strategy defining the measurements in order to compare among development steps and benchmark must be studied carefully. Objective measurements and subjective evaluation correlation is necessary to define the reference data. In this project, several cars were evaluated and measured performing standard maneuvers. The maneuvers were performed to obtain appropriated and enough information to understand the performance and to do the correlation. The subjective evaluation was normalized and; using objective data, parameters were calculated to represent properly and in a robust form the driver fills.

Few products or services exist that do not require some supply chain management. The more suppliers that are involved the more complex the supply chain management becomes. Even if the entire supply chain from basic raw materials that come from the earth or out of the minds and actions of people, is not considered there is still a supply chain that must be attended and in today's global economy competition is growing every day, and automotive products (vehicles and components) are often developed in one country though it's made based on global architectures, used and applied in other markets, and to find success in this competitive reality, automakers and/or global business migrated from local suppliers to global sourcing and in today's world of global outsourcing, supply chain management plays an ever important, strategic and expanding role in delivering results once automakers are aiming to launch low cost vehicles and recognized as world best-in-class products.

Even though the rollover is not the most frequent type of accident, it is of the greatest significance with respect to injury and trauma caused to the vehicle occupants. The need to reduce death incidence and serious injuries has increased the importance of computational simulations and prototype testing. This study presents finite element model to simulate rollover events and to predict possible injuries caused in the head, neck, thorax and cervical spine. Numerical models of a sport utility vehicle (SUV) are simulated including anthropomorphic dummy to represent the driver. The injury risks and traumas are verified to the driver considering belted and unbelted dummies. The computational methodology developed proved to be efficient for the evaluation of the vehicle's roof structure in rollover events.

Among all types of vehicle crashes, rollover is the most complex and yet least understood. During the last decades, a constant increase in the studies involving rollover crashes and injuries associated with it can be observed. Although the rollover is not the most frequent type of accident, it is of the greatest significance with respect to injury and trauma caused to the vehicle occupants. The existing standards and procedures to test rollover crashworthiness are still not suitable to computer simulation because of the huge computational effort required, and the need of faithful/overly complex representation of the aspects involved in real crashes. The objective of the present work is the development of computational models particularly adapted to simulate different standards and procedures used to evaluate the vehicles' roof strength. The models are compared with other approaches, and their advantages/disadvantages are discussed.

In the last decades, there has been an increasing demand for vehicle noise control and, at the same time, fuel economy has become critical for the automotive industry. Therefore, a precise balance between performance and mass of sound package components is essential. In this work the original dash insulation system of an automotive vehicle was replaced by a lightweight alternative. The methodology of Statistical Energy Analysis (SEA) was employed to design multilayered fibrous constructions for engine noise control. The results were verified through experimental testing and supported the achievement of vehicle requirements regarding comfort, weight and environment.

The current study shows important results obtained by a new technique of residual stress virtual evaluation in automotive components for improving the development and quality of new products, aiming the structural performance, mass and cost reductions. The approaching those virtual results were adjusted by metallurgic data obtained in metallography, mechanical and chemical analysis. As part of this proposal, an automotive aluminum wheel belong to current production was evaluated in accordance with data acquired in the wheel manufacturing process. It was taking in account the real information of casting process parameters and the metallurgic information obtained in laboratorial tests. In this work, the results show that product residual stresses shall be considerate and evaluated during design phases as improving proposal, new technical concerns and quality improving.