Search Results

It’s a common practice to use different kinds tools to aid in the development and verification of modern safety critical avionics systems. These tools play a key role in avionics engineering and used in all project phases: requirements development, software design, source code development, integration, configuration management, and verification. Tools assist to analyze and improve system safety by automation of some of the activities which if performed manually and are therefore prone to human error. However, incorrect functioning of a tool can have negative impact on the safety and performance of the Safety Critical system. Hence, tools are proposed to be qualified whenever any of the design assurance process(es) described in RTCA/DO-178C or RTCA/DO-254 are eliminated, reduced, or automated using the tool unless the output of the tool is verified manually. Qualification of the tool gives confidence in the tool functionality.

It is typical in aircraft engine design to explore new configurations in a constant effort to achieve greater efficiency with respect to various considerations. An integral component of this process requires a complete and robust simulation of rotor dynamics. Tuning the design with results of rotor dynamics simulations can be made possible with a tool that has adequate modeling techniques to capture the physics associated with engine behavior under various operating conditions accurately.

The On-Board Diagnostics II (OBD-II) port began as a means of extracting diagnostic information and supporting the right to repair. Self-driving vehicles and cellular dongles plugged into the OBD-II port were not anticipated. Researchers have shown that the cellular modem on an OBD-II dongle may be hacked, allowing the attacker to tamper with the vehicle brakes. ADAS, self-driving features and other vehicle functions may be vulnerable as well. The industry must balance the interests of multiple stakeholders including Original Equipment Manufacturers (OEMs) who are required to provide OBD function, repair shops which have a legitimate need to access the OBD functions, dongle providers and drivers. OEMs need the ability to protect drivers and manage liability by limiting how a device or software application may modify the operation of a vehicle.

In this work we have proposed an interesting clamping solution of V-band which has an important industrial impact by reducing the cost and assembly process as well compare to the traditional V-band. The design what we are focusing for is applied for all size of turbochargers which helps to connect the hot components such as manifold and turbine housing. The cost for V-band is mainly from T-bolt. It is made from special stainless steel which represents 50% of the total cost. In this work it is proposed a new V-band joint by changing bolt clamping status from tension to compression. From tension to compression we change the bolt material from high cost steel to low cost steel. The new total cost is reduced by 40%. The prototype is made and performed in static tests including anti-rotating torque test and salt spray test. The new joint meets the design requirements at static condition. Further work will focus on the dynamic qualification and at high temperature as well.

Health Ready Components are essential to unlocking the potential of Integrated Vehicle Health Management (IVHM) as it relates to real-time diagnosis and prognosis in order to achieve lower maintenance costs, greater asset availability, reliability and safety. IVHM results in reduced maintenance costs by providing more accurate fault isolation and repair guidance. IVHM results in greater asset availability, reliability and safety by recommending preventative maintenance and by identifying anomalous behavior indicative of degraded functionality prior to detection of the fault by other detection mechanisms. The cost, complexity and effectiveness of the IVHM system design, deployment and support depend, to a great extent, on the degree to which components and subsystems provide the run-time data needed by IVHM and the design time semantic data to allow IVHM to interpret those messages.

Turbochargers are widely used to boost internal combustion engines for both on and off high way applications to meet emission and performance requirements. Due to the high operating temperature, turbochargers are subjected to hostile environment. Low vibration level is one of the key requirements while designing turbo for every application. An engine bracket is employed to support turbine housing to reduce total vibration level. Turbine housing in the turbocharger is commonly equipped with boss to accommodate the engine bracket supporting which eventually includes additional constraints in the turbocharger system. Additional constraints in the turbine housing can lead to adverse impact in the Thermo-Mechanical Fatigue (TMF) life of the housing component. Boss generally has critical influence to thermal stress distribution of the turbine housing.

This paper identifies critical and relevant variable/adaptive cycle turbine engine and propulsion subsystem technologies for future next generation aviation systems. A comprehensive evaluation of key technology drivers associated with the development and demonstration of advanced Adaptive Power and Thermal Management System (APTMS) technologies applicable to next generation platforms is addressed. Specifically, the paper explores energy optimization through dynamic mission based simulations of an advanced hybrid air cycle / vapor cycle APTMS architecture combining multiple traditionally federated subsystem functions including auxiliary power, environmental control, emergency power, and engine start.

To obtain a system level, integrated perspective on vehicle energy management, the traditional methods for conducting preliminary design, gauging independent requirements, must be abandoned. This method does not capture critical interactions between the various aircraft subsystems. Instead, a more global appreciation for interactions across boundaries needs to be realized with a mosaic scheme, where models are integrated and co-simulated. The advantage of this approach is to enhance the preliminary design stage by predicting integration issues early in the development process. Legacy design practice involved gathering data from multiple vendors in order to produce design iterations. The ability to link models directly is extremely beneficial, as requirements no longer have to be executed independently. This approach reduces cumbersome iterations between model owners and accelerates trade studies.

The optimal integration of vehicle subsystems is of critical importance in the design of future energy efficient fighter aircraft. The INVENT (INtegrated Vehicle ENergy Technology) program has been dedicated to this endeavor through modeling/simulation of thermal management, power generation & distribution, & actuation subsystems. Achieving dual cooling & power generation capability from a single subsystem would be consistent with current efforts in system integration optimization. In this paper, we present a reconfiguration of an archetypal closed-loop air cycle system for a modern fighter as an open-loop gas generator cycle operating interchangeably between refrigeration and auxiliary power modes. A numerical model was developed within NPSS to assess maximum power extraction capabilities of a system originally designed for cooling purposes under different operating conditions.

Recent emphasis on optimization of engine technologies with ancillary subsystems such as power and thermal management has created a need for integrated system modeling. These systems are coupled such that federated design methods may not lead to the most synergetic solution. Obtaining an optimal design is often contingent on developing an integrated model. Integrated models, however, can involve combining complex simulation platforms into a single system of systems, which can present many challenges. Model organization and configuration control become increasingly important when orchestrating various models into a single simulation. Additionally, it is important to understand such details as the interface between models and signal routing to ensure the integrated behavior is not contaminated or biased. This paper will present some key learnings for model integration to help alleviate some of the challenges with system-based modeling.

An important part of future air vehicle design will be the development of a transient integrated aircraft system model. DC electric power system modeling poses particular challenges because they are highly dynamic and employ short time constant line replaceable units [1, 2, 3]. This paper describes an approach to modeling an aircraft's electric power system that uses simplified non-physics based models of the line replaceable units that are part of future 270VDC aircraft power systems. The model is an alternative to physics based models and is particularly useful for the initial phases of aircraft development before hardware development has occurred. A 270VDC aircraft power system model is constructed as an example using the unit models. Selected results will be presented.

There is a continuing need to simulate power electronic circuits that include magnetic components. It is necessary to determine the interaction of the magnetic component with the rest of the power electronic system so that a dynamic circuit model of the magnetic components including material saturation and iron losses is required. Also, the magnetic component model must be valid when the magnetic component's excitation is not sinusoidal. A dynamic magnetic circuit model derived from Maxwell's equations along with useful theorems for building circuit models from the structure of the magnetic device is reviewed. The developed circuit models are general including magnetic saturation and iron losses. Simulation results for a DC/DC converter employing a conventional gapped inductor and a gapped coupled inductor are presented.

Current industry trends demonstrate aircraft electrification will be part of future platforms in order to achieve higher levels of efficiency in various vehicle level sub-systems. However, electrification requires a substantial change in aircraft design that is not suitable for re-winged or re-engined applications as some aircraft manufacturers are opting for today. Thermal limits arise as engine cores progressively get smaller and hotter to improve overall engine efficiency, while legacy systems still demand a substantial amount of pneumatic, hydraulic and electric power extraction. The environmental control system (ECS) provides pressurization, ventilation and air conditioning in commercial aircraft, making it the main heat sink for all aircraft loads with exception of the engine fuel thermal management system.

This article attempts to provide a big picture of systems engineering in both philosophy and engineering perspectives, discusses current status and issues, trends of systems engineering development, future directions and challenges, followed by certain examples.

Natural atmospheric radiation effects have been recognized in recent years as key safety and reliability concerns for avionics systems. Atmospheric radiation may cause Single Event Effects (SEE) in electronics. The resulting Single Event Effects can cause various fault conditions, including hazardous misleading information and system effects in avionics equipment. As technology trends continue to achieve higher densities and lower voltages, semiconductor devices are becoming more susceptible to atmospheric radiation effects. To ensure a system meets all its safety and reliability requirements, SEE induced upsets and potential system failures need to be considered. The purpose of this paper is to describe a process to incorporate the SEE analysis into the development like-cycle. Background on the atmospheric radiation phenomenon and the resulting single event effects, including single event upset (SEU) and latch up conditions is provided.

The operating environment of aircraft causes accumulation and build-up of contamination on both the narrowest passages of the ECS (Environmental Control System) i.e: the heat exchangers. Accumulated contamination may lead to reduction of performance over time, and in some case to failures causing AOG (Aircraft on Ground), customer dissatisfaction and elevated repair costs. Airframers/airlines eschew fixed maintenance cleaning intervals because of the high cost of removing and cleaning these devices preferring instead to rely on on-condition maintenance. In addition, on-wing cleaning is t impractical because of installation constrains. Hence, it is desirable to have a contamination monitoring that could alert the maintenance crew in advance to prepare and minimize disruption when contamination levels exceed acceptable thresholds. Two methods are proposed to achieve this task, The effectiveness of these methods are demonstrated using analytical and computational tools.

The goal of the presented research is to study the effective operational range for a centrifugal vaneless diffuser turbocharger compressor with ported shroud typically used in diesel engines. A turbocharger bench facility was designed and tested in order to define the performances of the compressor and to better understand the occurrence of instabilities in the housing. Specific emphasis was given to the low mass flow rate region of the compressor performance characteristics where instabilities occur with fluctuations that can be significantly large in the case of surge. Static pressures and dynamic pressure fluctuations were measured at the inlet, the outlet, as well as at different positions around the volute and diffuser sections of the compressor in order to assess the development and propagation of flow instabilities. The dynamic signature of the flow was measured along with the elaboration of the compressor mapping.

This talk will present an overview of the newly published DO-326/ED-202 "Airworthiness Security Process Specification". Presenter Daniel P. Johnson, Honeywell

Atmospheric Neutron Single Event Effects (SEE) are widely known to cause failures in all electronic hardware, and cause proportionately more failures in avionics equipment due to the use altitude. In digital systems it is easy to show how SEE can contribute several orders of magnitude more faults than random (hard) failures. Unfortunately, current avionics Safety assessment methods do not require consideration of faults from SEE. AVSI SEE Task Group (Aerospace Vehicle Systems Institute Committee #72, on Mitigating Radiation Effects in Avionics) is currently coordinating development of an atmospheric Neutron Single Event Effects (SEE) Analysis method. This analysis method is a work in progress, in close collaboration with SAE S-18 and WG-63 Committees (Airplane Safety Assessment Committee). The intent is to include this method as part of current revisions to ARP4761 (Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment).

The study of Supercooled Large Droplets (SLD) has received greater attention in the Aviation industry since the ATR-72 accident in 1994, which was attributed to SLD. This type of icing cloud usually consists of droplets of up to a millimeter in diameter and mean volumetric diameter (MVD) greater than 40 microns1. The analyses of the ice accretion process with SLD have focused mainly on the wing and stabilizers, particularly on the leading edges where accretion can occur beyond the ice protected areas. There are several numerical and empirical models to predict the mass and shapes of ice accreted from SLD, but there are few published papers that focus on SLD accretion within aircraft turbofan engines2, 3, 4, 5, 6, 7, 8, 9. SLD droplets have higher inertia than conventional icing droplets, which leads to their trajectories being less influenced by the aerodynamic forces. However, large droplets are more likely to breakup than smaller droplets when subjected to highly shear flows.