Search Results

The work examined the practicality of converting a modern production 6 cylinder 7.7 litre heavy-duty diesel engine for flex dual-fuel operation with ammonia as the main fuel. A small amount of diesel fuel (pilot) was used as an ignition source. Ammonia was injected into the intake ports during the intake stroke, while the original direct fuel injection equipment was retained and used for pilot diesel injection. A bespoke engine control unit was used to control the injection of both fuels and all other engine parameters. The aim was to provide a cost-effective retrofitting technology for existing heavy-duty engines, to enable eco-friendly operation with minimal carbon emissions. The tests were carried out at a baseline speed of 600 rpm for the load range of the engine (10-90%), with minimum pilot diesel quantity and as high as 90% substitution ratio of ammonia for diesel fuel.

Lithium-ion cells operate under a narrow range of voltage, current, and temperature limits, which requires a battery management system (BMS) to sense, control, and balance the battery pack. The state of power (SOP) estimation is a fundamental algorithm of the BMS. It operates as a dynamic safety limit, preventing rapid ageing and optimizing power delivery. SOP estimation relies on predictive algorithms to determine charge and discharge power limits sustainable within a specified time frame, ensuring the cell design constraints are not violated. This paper explores various approaches for real-time deployment of SOP estimation algorithms for a high-power lithium-ion battery (LIB) with a low-cost microcontroller. The algorithms are based on a root-finding approach and a first-order equivalent circuit model (ECM) of the battery.

Ammonia (NH3) is emerging as a potential fuel for longer range decarbonised heavy transport, predominantly due to favourable characteristics as an effective hydrogen carrier. This is despite generally unfavourable combustion and toxicity attributes, restricting end use to applications where robust health and safety protocols can always be upheld. In the currently reported work, a spark ignited thermodynamic single cylinder research engine was upgraded to include gaseous ammonia and hydrogen port injection fueling, with the aim of understanding maximum viable ammonia substitution ratios across the speed-load operating map. The work was conducted under stoichiometric conditions with the spark timing re-optimised for maximum brake torque at all stable logged sites. The experiments included industry standard measurements of combustion, performance and engine-out emissions.

Li-ion batteries (LIBs) optimum performance and lifetime depend on temperature, with the commonly suggested operating temperature being in the range of 25 to 40 °C. It's also crucial to keep the temperature difference between battery cells below 5°C. Operation at different temperature ranges can adversely affect or degrade the performance and lifetime of LIBs. A battery thermal management system (BTMS) is essential for keeping the battery temperature within the optimum range. This paper aims to develop and analyze the BTMS for an electric heavy-duty truck. To achieve this aim, battery cells and modules are modelled in ANSYS Fluent software. Validation with experimental results and mesh sensitivity studies are also performed to increase confidence in simulation data. The model is then analyzed for a specific cooling systems to investigate its effect on battery thermal performance during the operation.

Lithium-ion batteries are ubiquitous in modern energy storage applications, necessitating efficient methods for assessing their state and performance. This study explores a non-destructive approach to extract vital battery parameters using machine learning techniques applied to simulated Electrochemical Impedance Spectroscopy (EIS) data. EIS is a powerful diagnostic tool for batteries and provides a safe and repeatable alternative to the physical intrusion of battery dismantling, which could alter the batteries properties. The research focuses on the design and training of machine learning models for accurate prediction of battery parameters within the widely used P2D model. By leveraging the power of machine learning, this approach aims to accurately characterize the battery parameters using an electrochemical model as opposed to the less accurate equivalent circuit models, contributing to the reliability and longevity of lithium-ion batteries in diverse applications.

This paper presents a method for analysing the characteristics of nano-scale particles emitted from a 1.6 Litre, 4-stroke, gasoline direct injection (GDI) and turbocharged spark ignition engine fitted with a three-way catalytic converter. Ensemble Empirical Mode Decomposition (EEMD) is employed in this work to decompose the nano-scale particle size spectrums obtained using a differential mobility spectrometer (DMS) into Intrinsic Mode Functions (IMF). Fast Fourier Transform (FFT) is then applied to each IMF to compute its frequency content. The results show a strong correlation between the IMFs of specific particle ranges and the IMFs of the total particle count at various speed and load operating conditions. Hence, it is possible to characterise the influence of specific nano-scale particle ranges on the total particulate matter signal by analysing the frequency components of its IMFs using the EEMD-FFT method.

Porous wall permeability is one of the most critical factors for the estimation of backpressure, a key performance indicator in automotive particulate filters. Current experimental and analytical filter models could be calibrated to predict the permeability of a specific filter. However, they fail to provide a reliable estimation for the dependence of the permeability on key parameters such as wall porosity and pore size. This study presents a novel methodology for experimentally determining the permeability of filter walls. The results from four substrates with different porosities and pore sizes are compared with several popular permeability estimation methods (experimental and analytical), and their validity for this application is assessed. It is shown that none of the assessed methods predict all permeability trends for all substrates, for cold or hot flow, indicating that other wall properties besides porosity and pore size are important.

The number of electric vehicles is increasing in line with the global carbon reduction targets. More households are installing electric charging points to complement the existing charging infrastructure. The increasing electricity prices affected by the global energy/economic crisis however pushed more households towards coupling their charging points with renewable energy generation and storage systems to manage the supply and demand of energy more effectively. In this study, an electric charging station equipped with Photovoltaic panels and an electric storage system utilising second-life Electric Vehicles (EV) batteries is designed and analysed. Various electricity generation capacities are considered to be installed on the roof of the case study building ranging from 5m2 and 20m2. The second-life batteries are disposed from EVs with an 80% state of health. MATLAB Simulink is used for mathematical modelling of system.

To decarbonize heavy-duty vehicles solely through electrification with batteries is challenging as large batteries are required for a meaningful range, severely impacting payload. Employment of hybrid electric powertrains where fuel cells are integrated with batteries can deliver increased range and payload. However, the energy balance between the fuel cell and the battery needs to be analyzed to optimize the sizing of the powertrain components. This study has performed a multi-objective optimization using genetic algorithm to obtain the optimum range and hydrogen consumption for a DAF 44 tons heavy-duty truck. The proposed truck powertrain has been numerically modelled in AVL CRUISE M software. The electric drive from Involution Technologies Ltd and Bramble Energy Ltd’s printed circuit board fuel cell (PCBFC) are used in the model.

Drive cycles have been the official way to create standardized comparisons of fuel economy and emission levels between vehicles. Since the 1970s these have evolved to be more representative of real-world driving, with today’s standard being the World Harmonized Light Vehicle Testing Procedure. The performance of battery electric vehicles which consist of electric drives, battery, regenerative braking and their management systems may differ when compared to that of vehicles powered by conventional internal combustion engines. However, drive cycles used for evaluating the performance of vehicles, were originally developed for conventional powered vehicles. Moreover, the kinematic parameters that can distinguish the real-world performance of the differently powered vehicles are not fully known. This work aims to investigate the difference between vehicles powered by pure internal combustion engine, electric hybrid and pure electric drive.

Formula (1) vehicles have transitioned from E5 to E10 fuel for the 2022 season to reduce carbon emissions and by 2026 the vehicles are required to use 100% sustainable fuels. The aim of this paper is to identify the operating envelope of the F1 power unit for E10-E100 fuel and the resulting emission levels for these fuel compositions using numerical simulations. To achieve this aim an F1 engine model has been developed in GT-Suite with reference to the FIA 2022 Technical Regulations. The combustion model has been validated using data obtained from literature relating to laminar and turbulent flame speed, friction and heat transfer characteristics within the combustion chamber. One of the main challenges of using ethanol-based fuels is the increased levels of formaldehyde in the tailpipe.

Electrification of the transportation sector requires an energy-efficient electric powertrain supported by renewable sources of energy to limit the use of fossil fuels. However, the integration of battery electric powertrains in heavy-duty trucks seems more challenging than other types due to the high battery demand and negative impacts on the truck’s cargo capacity. In this paper, the battery sizing of a 41-tons Mercedes Actros truck is performed based on battery safety zone operating conditions. A parametric study is conducted to assess the impacts of sizing on a truck’s total cargo capacity as well as the body dynamic parameters. The numerical model of the Mercedes Actros electric powertrain is developed in AVL CRUISETM M software. The hybrid pulsed power characterization tests are performed on 3Ah lithium-ion NMC cells in the lab for fitting the second-order equivalent circuit model’s parameters used in the analysis.

Internal combustion (IC) engines are the most common power unit technology found in road vehicles. The process of combustion within IC engines is linked to the output torque and overall powertrain performance. This work presents a method of analysing the parameters of cylinder pressure and crankshaft instantaneous speed signals obtained from a turbocharged, 4-stroke, 4-cylinder, 1.6 Litre, spark ignition, gasoline direct injection engine at various speed and load operating conditions. Whereas cepstrum analysis is used in the present work to extract critical features characterising the combustion process. Cepstrum analysis showed that the location of maximum heat release can be directly obtained from the quefrency of the instantaneous crank speed. This paper presents a systematic scheme for applying cepstrum for obtaining combustion features from the instantaneous crank speed signal.

Electrification is one of the main solutions for the decarbonization of the transport system. It is employed widely by the automotive industry in light- and medium-duty vehicles and recently started to be considered in heavy-duty applications. However, powertrain electrification of heavy-duty vehicles, especially for Class 8 trucks, is very challenging. In this study, the battery-electric powertrain energy and technical performance of a DAF 44 tones truck are compared for two different electric drives. The case study truck is modeled in AVL CRUISE M software and the battery electric powertrain is evaluated for long haul driving cycle. The minimum number of battery packs is determined by defining the lowest energy consumption of the powertrain designed for the proposed drive cycle. Also, a transient analysis is accomplished to investigate the impact of various electric drives on energy consumption and performance of the proposed electric powertrain.

While the shift to vehicle electrification plays a pivotal role in governments’ targets towards carbon neutrality, there exists certain technical challenges that need to be addressed. The motorsport car industry is also affected by this policy with the electric cars being included in the formula SAE and formula E competitions as one of the main categories. Moreover, there is a gap in the literature in energy assessment of the electric powertrain used in Formula SAE (FSAE) and Formula Student (FS) cars. In this paper, a Formula Student electric car powertrain was designed as a case study for energy analysis. The proposed electric powertrain is equipped with a four-wheel drive system. The vehicle was modelled in AVL CRUISE M software using technical and measured lab data as input parameters. Simulations were run in a transient driving cycle for a real circuit layout used in previous SAE competitions.

Formula One (F1) is considered to be the forefront of innovation for the automotive and motorsport industry. One of the key provisions has been towards the inclusion of the Energy Recovery System (ERS) since 2014 in F1 regulations. ERS comprises Motor Generator Unit-Heat (MGU-H), Motor Generator Unit-Kinetic (MGU-K) and an Energy Storage (ES). This has not only converted the conventional powertrain into a hybrid power-split device, but also imposed constraints on the fuel energy available, energy recovered and deployed by MGU-K, and charge stored in ES, along with various other parameters. Although the objective for a F1 race is to minimize lap-time, it is obvious that there is no unique control path or decision to meet this objective. This builds up needs to optimally control the power-split and energy of the system.

The COVID-19 pandemic has forced governments to implement rigorous containment measures on reduction or cessation of human mobility, transportation and economic activities, to control the spread of the virus. This is considered as a unique opportunity to study the impact of local lockdowns periods, especially, on the vehicle emission levels, and urban air quality in cities with high pollution levels, such as Bogota, Colombia. The first case was confirmed in Colombia on March 6, 2020, since then to prevent its propagation, the government declared a national lockdown starting from March 20 until August 31, 2020. Therefore, this study attempted to analyse the air quality in Bogota by assessing the concentrations of the atmospheric pollutants NO₂, SO₂, O₃, CO, PM₂.₅ and PM₁₀ during the lockdown period and the corresponding concentrations levels during the same period in 2018 and 2019. The data for this pilot study was obtained from the air quality monitoring stations of Bogota.

Internal combustion (IC) engines are the current dominant power source used in the automotive industry for hybrid vehicles. The combustion process of IC engines involves various parameters, which are linked to the overall performance of the driveline. Therefore, finding the frequency coupling between the manifold pressure, in-cylinder pressure and output crankshaft speed will provide an insight into the reasons for torque fluctuations and its effect on driveline performance. The present work introduces a methodology to analyze cylinder pressure, manifold pressure and instantaneous crank speed signals measured from a 4 cylinder, 1.6 Litre, Gasoline Direct Injection Engine at different speed conditions to identify the frequency coupling between these signals. This work uses Ensemble Empirical Mode Decomposition (EEMD) as a de-noising method and Bispectral analysis for examining the presence of a frequency coupling from the signals.

Permanent magnet (PM) electrical machine has far-reaching impacts in aviation electrification due to the continuous development in high power density and high efficiency electrical drives. The primary barrier to acceptance of permanent magnet machines for safety-critical starter-generator systems is its low fault-tolerance capability and low reliability (for the conventional designs). This article investigates a modular triple three-phase PM starter-generator comprehensively, including the tradeoff of fault-tolerant topology, optimization design process, analysis of electromagnetic (highlight the post-fault analysis) and thermal behavior, respectively. The triple three-phase segmented topology proposed meet the fault-tolerant requirement along with complete electrical, magnetic, and thermal isolation. There would be cost penalty on the proposed topology, but it gets offset by the ease of manufacturing of coils and their insertion.

Electric machines in aerospace applications are subjected to extremely high operating temperatures. This increases coercivity or decreases saturation flux density of the electrical steel resulting in increased core loss. The need for high power density and increased operating speed favours the use of thin gauge Silicon Steel (Si-Fe) and Cobalt Iron (Co-Fe) laminations for aerospace applications. Therefore, the variation in iron loss is studied for three grades of Si-Fe laminations by subjecting them to controlled ageing in laboratory. The analysis is also provided over a range of flux density and frequency to generalize the phenomenon over the operating domain. The results of ageing the laminations are in turn used to predict the degradation in performance of a 1.15 MW, 16-pole 48-slot propulsion machine for aerospace application. The degradation is estimated in terms of variation in iron loss.