Search Results

Although aircraft tires are traditionally tested on external dynamometers, the effects of the curved test surface on normal contact pressure distribution and footprint area of a tire have not been previously addressed. Using the Tire Force Machine (TFM) at the Wright Laboratory Landing Gear Development Facility (LGDF), trends for pressure distribution and footprint area were investigated for concave, convex and flat plate surfaces. This evaluation was performed using the F-16 bias, F-16 radial and B-57 bias main landing gear tires at rated load and inflation pressures. The trends for overall tire footprint behavior indicate that the more convex the surface, the smaller the contact area and the larger the normal contact pressures. Conversely, the more concave the surface, the larger the contact area and the smaller the normal contact pressures. Based on these results, the study recommends a 168″ diameter concave (internal roadwheel) dynamometer for tire wear/durability tests.

A novel robot architecture has been developed which promises cost savings in a variety of applications in Space and on Earth. Utilizing cables in order to effect motion in a general workspace provides large weight savings, as well as high end effector stiffness. The architecture has been built and successfully tested in space. The capability of the robotic system to actuate those switches, dials, and buttons expected in space environments, as well as to read displays and transmit video to earth for operator feedback have been proven, and are discussed herein.

The paper describes the development, implementation, and benefits of a real-time statistical process control (SPC) data acquisition and response system. The system has been installed on four production CNC riveters and provides enhanced, in-process control of automated fastening machine performance. Each system employs commercially available SPC components. These components, coupled with real-time data acquisition computers, have been integrated with the riveter's controllers and sensors to detect process anomalies as they occur. Real-time knowledge of fastening machine performance is the benefit of this system's approach to SPC. Fastener quality is ensured during the fastening cycle, not after sequences (and perhaps hundreds of rivets) have been completed.

The objective of this paper is to present results of MDA's payload vibration isolation system research and development program. A unique isolation system with passive or active capabilities designed to provide isolation down to 10-6 g was developed and tested in our 1-g testbed under simulated microgravity conditions. Fluid and electrical umbilicals are also included in the system. The established isolation system performance requirements were met and the testbed data were used to refine our analytical models for predicting flight performance. Simulations using an updated Space Station configuration showed that the payload microgravity requirement can be met by upgrading the hardware from laboratory to flight tolerances and improving the control system design. The next step is to flight test the systems verified in 1 g on the STS/SPACEHAB using a middeck locker size development unit.

The Space Station Freedom program requires long-life thermal control coatings that are stable in low Earth orbit (LEO). To provide designers with a variety of coatings and optical properties, improvements were made to existing coatings, and new thermal control coatings were developed. Anodized aluminum was demonstrated to be an acceptable substrate for inorganic thermal control coatings such as Z-93. Mixtures of Z-93 with stable black oxides provided a wide range of optical properties and were stable in a simulated LEO environment. In addition, sulfuric acid anodized aluminum was developed to a production status to provide controlled optical properties for many aluminum alloys.