Search Results

Synthetic fuels derived from renewable power sources, so-called e-fuels, will play a crucial role in achieving climate-neutral future mobility because they can be used in the existing fleets and in hard-to-decarbonize applications. In particular e-fuels that contain oxygen in their chemical structure can also burn more cleanly in terms of soot formation. For compression-ignition engines, polyoxymethylene dimethyl ethers (PODEs or OMEs) are among the most promising candidates for such oxygenated e-fuels. Here, we investigated the characteristics of injection and combustion of OME3-5 mixture compared to n-dodecane, a reference diesel-like fuel. Both single and multi-injection, comprising a short pilot injection, is used. Experiments were performed in a single-cylinder optically accessible Bowditch-type engine, injecting with 1500 bar pressure with a 3-hole injector (Spray B of the Engine Combustion Network).

Mixture formation in a hydrogen-fueled heavy-duty engine with direct injection and a nearly-quiescent top-hat combustion chamber was investigated using laser-induced fluorescence imaging, with 1,4-difluorobenzene serving as a fluorescent tracer seeded into hydrogen. The engine was motored at 1200 rpm, 1.0 bar intake pressure, and 335 K intake temperature. An outward opening medium-pressure hollow-cone injector was operated at two different injection pressures and five different injection timings from early injection during the intake stroke to late injection towards the end of compression stroke. Fuel fumigation upstream of the intake provided a well-mixed reference case for image calibration. This paper presents the evolution of in-cylinder equivalence ratio distribution evaluated during the injection event itself for the cylinder-axis plane and during the compression stroke at different positions of the light sheet within the swirl plane.

The oil transport phenomena in the chamfer beneath the oil control ring of a piston in a motored engine were investigated with a combined experimental-numerical approach. High-speed laser-induced fluorescence was used to visualize the oil distribution crank-angle-resolved on both thrust side and anti-thrust side of an optically accessible single cylinder engine. Corresponding three-dimensional volume-of-fluid CFD simulations were calibrated with the experiment and then utilized to analyze the cross sectional flows in the chamfer. Phenomena triggered by inertial forces and the lateral piston motion, e.g. oil transport from the piston to the liner (bridging) and the formation of a circular flow in the chamfer, are described in detail.

Late-evaporating liquid fuel films within the combustion chamber are considered a major source of soot in gasoline direct-injection engines. In this study a direct-injection model experiment was developed to visualize and investigate the evaporation of fuel films and their contribution to soot formation with different diagnostic techniques. A mixture of isooctane (surrogate fuel) and toluene (fluorescent tracer) is injected by a multi-hole injector into a wind tunnel with an optically accessible test section. Air flows continuously at low speed and ambient pressure through the test section. Some of the liquid fuel impinges on the quartz-glass windows and forms fuel films. Combustion is initiated by a pair of electrodes within the fuel/air-mixture. The turbulent flame front propagates through the chamber and ignites pool fires near the fuel films, leading to locally sooting combustion.

Two optical techniques were developed and combined with a CFD simulation to obtain spatio-temporally resolved information on air/fuel mixing in the cylinder of a methane-fueled, fired, optically accessible engine. Laser-induced fluorescence (LIF) of anisole (methoxybenzene), vaporized in trace amounts into the gaseous fuel upstream of the injector, was captured by a two-camera system, providing one instantaneous image of the air/fuel ratio per cycle. Broadband infrared (IR) absorption by the methane fuel itself was measured in a small probe volume via a spark-plug integrated sensor, yielding time-resolved quasi-point information at kHz-rates. The simulation was based on the Reynolds-averaged Navier-Stokes (RANS) approach with the two-equation k-epsilon turbulence model in a finite volume discretization scheme and included the port-fuel injection event. Commercial CFD software was used to perform engine simulations close to the experimental conditions.

This paper presents the study of a relationship between objective vertical vibration and coil spring fatigue life under different road excitation to shorten suspension design process. Current development processes of vehicle suspension systems consist of many different stages of analysis and time consuming. Through this vertical vibration and durability characterisation, the vehicle ISO weighted vertical accelerations were used to describe fatigue life of coil spring. Strain signals from various roads were measured using a data acquisition and then converted into acceleration signal. The acceleration signals were then used as input to multibody suspension model for forces time history on spring and acceleration signal of sprung mass extraction. The acceleration signals were then processed for ISO weighted indexes while the force time history was used for coil spring fatigue life prediction respectively.

This work investigates the image quality achievable with a large-aperture endoscope system and high-speed cameras in terms of detecting the premixed flame boundary in spark-ignited engines by chemiluminescence imaging. The study is an extension of our previous work on endoscopic flame imaging [SAE 2014-01-1178]. In the present work, two different high-speed camera systems were used together with the endoscope system in two production engines to quantify the time-resolved flame propagation. The systems were cinematography with a CMOS-camera, both with and without an intensifier, the latter variation being used in a four-cylinder automotive engine as well as in a single-cylinder motorcycle engine. An algorithm with automatic dynamic thresholding was developed to detect the line-of-sight projected flame boundary despite artifacts caused by the spark and the large dynamic range in image brightness across each time series.

In this study two different simulation approaches to large eddy simulation of spark-ignition engines are compared. Additionally, some of the simulation results are compared to experimentally obtained in-cylinder velocity measurements. The first approach applies unstructured grids with an automated meshing procedure, using OpenFoam and Lib-ICE with a mapping approach. The second approach applies the efficient in-house code PsiPhi on equidistant, Cartesian grids, representing walls by immersed boundaries, where the moving piston and valves are described as topologically connected groups of Lagrangian particles. In the experiments, two-dimensional two-component particle image velocimetry is applied in the central tumble plane of the cylinder of an optically accessible engine. Good agreement between numerical results and experiment are obtained by both approaches.

This work proposes a focus on the simulation of a rotative volumetric expander via a CFD code. A customized application of OpenFOAM® has been developed to handle the particular motion of the calculation grid. The model uses a mesh to mesh interpolation technique, switching from a calculation grid to the new one on the basis of mesh quality considerations performed on the fly. This particular approach allows to account for the presence of leakages occurring between the stator and blade tips and also occurring at the top and bottom of the vanes. The fluid considered is the refrigerant R245fa, whose particular properties have been determined resorting to the NIST database. Experimental data, measured at different conditions of mass flow and fluid temperature, are compared to calculation results. Moreover, the CFD analysis has allowed the estimation of the influence of the leakage mass flow occurring at the tip of the vanes on the overall machine performances.

During development process phases, mechatronic systems needs to be quantified to decide in early design phase which topology or hardware satisfy the safety requirements regulated by law. The regulations by law are focused especially to reliability and safety oriented aspects of safety relevant systems or components. The contribution deals with the automation of formal processes from design to the generation of reliability-oriented evaluation allowing the consideration of alternatives and appearing conflicts between several additional aspects like cost, spatial needs etc.. During design stage, when relevant system factors are determined, the system architecture is designed, and a function oriented topology tree is generated, the construction of the reliability-oriented structure (topology), which is used to consider the reliability-oriented aspects, can be made.

The improvement of the exhaust gas contents of diesel engines with respect to particles and gaseous emissions is still a very important engineering topic. In this work two different direct injection methods into the combustion chamber of a diesel engine have been investigated and compared. The first system involves the separate injection of H2O2/water solutions using a second nozzle, while the other is the injection of H2O2/water/diesel emulsions by a single injection system. It is known that H2O2 forms OH radicals at higher temperatures, whose probability for the oxidation of diesel soot is much higher than that of molecular oxygen [1]. The H2O2 injection into the combustion chamber [2] and the exhaust pipe of diesel engines [3] has proved to be an effective measure towards the reduction of diesel soot. A Differential Mobility Analyzer (DMA) is applied to detect the change in particle diameter as function of H2O2/water addition.