Search Results

Standard

Minimum Performance Standard Stall Warning Equipment

2020-12-22

CURRENT

AS8014A

This Aerospace Standard covers two basic Stall Warning Systems, one measures air flow and pressure distribution on the airfoil and the other measures the angle of airflow with respect to an arbitrary reference line. Each type of system includes, as a minimum, a sensor and the means for activating a device which warns the pilot of an impending stall.

Standard

Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

2020-12-22

CURRENT

ARP921B

This SAE Aerospace Recommended Practice (ARP) covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft.

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Indicator, Pressure, 1 1/2-Inch, Integrally Lighted

2012-08-22

CURRENT

AS23479A

This specification covers design requirements and all performance requirements for the procurement of single and dual hermetically sealed, integrally lighted, remote indicating, pressure indicators.

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

2012-08-22

CURRENT

AS22145A

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Compass; Magnetic, Pilot's Standby

2012-08-22

CURRENT

AS5604A

This specification covers the design requirements and all performance requirements for procurement of 1 7/8 inch dial pilot’s standby compasses as specified herein.

Standard

Fuel and Oil Quantity Instruments

2012-08-22

CURRENT

AS405D

This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments

Standard

FLIGHT TEST PROCEDURES FOR STATIC PRESSURE SYSTEMS INSTALLED IN SUBSONIC TRANSPORT AIRCRAFT

2011-08-10

HISTORICAL

ARP921

This Aerospace Recommended Practice covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft.

Standard

Airstream Deviation Instrument (ADI)

2008-02-16

CURRENT

ARP794A

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

Temperature Instruments (Reciprocating Engine Powered Aircraft)

2008-02-16

CURRENT

AS413B

This Aerospace Standard covers two basic types of temperature instruments as follows: TYPE I: Ratiometer type, actuated by changes in electrical resistance of a temperature sensing electrical resistance element; the resistance changes being obtained by temperature changes of the temperature sensing resistance element. TYPE II: Millivoltmeter type, operated and actuated by varying E.M.F. output of a thermocouple; the varying E.M.F. input to the instrument being obtained by temperature changes of the temperature sensing thermocouple.

Standard

TEMPERATURE INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT)

2008-02-16

CURRENT

AS414B

This SAE Aerospace Standard (AS) covers two basic types of temperature instruments as follows: Type I: Ratiometer type, actuated by changes in electrical resistance of a temperature sensing electrical resistance element; the resistance changes being obtained by temperature changes of the temperature sensing resistance element. Type II: Millivoltmeter type, operated and actuated by varying EMF output of a thermocouple; the varying EMF input to the instrument being obtained by temperature changes of the temperature sensing thermocouple.

Standard

Directional Indicating System (Turbine Powered Subsonic Aircraft)

2008-02-16

HISTORICAL

ARP416A

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Single-Degree-of-Freedom Spring-Restrained Rate Gyros

2008-02-16

CURRENT

AS1104

This specification covers that gyroscopic instrument normally defined as a "subminiature rate gyro." The rate gyro, when subjected to an angular rate about its input axis, provides an AC output voltage proportional to the angular rate. The subminiature size category generally includes gyro instruments of one (1) inch diameter or less and three and one-half (3 1/2) inches length or less. This specification defines the requirements for a subminiature spring-restrained, single-degree-of-freedom rate gyro for aircraft, missile, and spacecraft applications.

Standard

Minimum Performance Standard for Direction Instrument, Non-Magnetic (Gyroscopically Stabilized)

2008-02-16

CURRENT

AS8021

This document establishes the minimum requirements for design and qualification of equipment identified as Gyroscopically Stabilized Non-Magnetic Direction Instruments.

Standard

Minimum Performance Standard for Automatic Pressure Altitude Digitizer Equipment

2008-02-16

CURRENT

AS855

All automatic altitude reporting digitizer equipment manufactured under this standard shall comply with the requirements as specified up to its maximum range as indicated on the equipment nameplate.

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2008-02-16

HISTORICAL

AIR818D

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

SYNCHROS

2008-02-16

CURRENT

ARP461B

This document is limited to units meeting the definitions of para. 1.3 and covers the following general class of synchros:

Standard

Pressure Ratio Instruments

2008-02-16

CURRENT

ARP427A

This Aeronautical Recommended Practice covers two types of two unit Pressure Ratio Instruments each of which consist of a Transducer and an Indicator. The Transducer computes the ratio of two pressures and converts this ratio to a synchro electrical signal which is transmitted to the Indicator.

Standard

MINIMUM PERFORMANCE STANDARD FOR BANK & PITCH INSTRUMENTS

2008-02-16

CURRENT

AS8001

This Standard covers Bank and Pitch Instruments which measure and display the angular displacement of bank and pitch from a gyroscopic vertical reference. This reference may be pneumatically or electrically driven and be contained within the instrument display case or located remotely. Unless otherwise specified, whenever the term "Instrument" is used, it is to be understood to be the complete system of gyro component, any auxiliary equipment and display.

Standard

Compass System Installations

2008-02-16

HISTORICAL

ARP426A

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.