Search Results

This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.

This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.

The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.

This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.

Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.

This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii).

This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.

This SAE Aerospace Recommended Practice (ARP) establishes requirements for the function, characteristics, and installation of an aircraft On Board Weight and Balance System (OBWBS) for use on civil transport aircraft. This document is not intended to specify design methods, mechanisms, or material to accomplish the requirements set forth.

This SAE Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100A, published 2006-04 [TSO pending], as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.

This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.

This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.

This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.

This Aerospace Recommended Practice aims at providing general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight: a Cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems meeting the restraint requirements of air cargo pallets approved in accordance with NAS 3610 or AS36100, or b Additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or centre of gravity location, or c Individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, or d Individual pieces of load loaded in non-containerized (bulk loaded) baggage or cargo compartments.

The primary purpose of the shipping closure is to protect the aircraft parts or system from damage and foreign material ingress/egress (e.g., dust, dirt or other contaminants) during transport and storage. Shipping closures are not airworthy items. Therefore, their usage is defined as preventative for the parts to be protected as opposed to operational. Military and commercial customer requirements for the prevention of damage or contamination to stored parts are generally limited to the generic instructions “all openings should be sufficiently covered to prevent the entrance of dust, dirt, moisture or other foreign contaminants”. This recommended practice outlines basic minimum parameters for suggested item construction and usage. Additionally, this recommended practice provides instruction on how to apply these closures to various openings.

This specification covers new cylindrical drums to be used as exterior shipping containers (see 6.1).

This specification covers general requirements for covers intended to protect the following aircraft parts: Cockpit Fuselage Canopy Engine Armament Propeller or Rotor Miscellaneous

This specification covers the tie down assemblies for use on helicopter blades.