Search Results

Standard

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2024-04-01

CURRENT

AMS4344G

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 inches (6.35 to 50.80 mm) in nominal thickness and up to 32 square inches (206 cm2), inclusive, in cross-sectional area (see 8.5).

Standard

Aluminum Alloy, Extrusions and Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), Solution and Precipitation Heat Treated

2024-03-27

CURRENT

AMS4150P

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing, flash-welded rings fabricated from extruded stock, and stock for flash-welded rings (see 8.6).

Standard

Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged

2024-03-22

CURRENT

AMS4157F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).

Standard

Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged

2024-01-22

CURRENT

AMS4343G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing up to 5.000 inches, (127.00 mm), inclusive, in nominal diameter or least thickness (see 8.5).

Standard

Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2024-01-16

CURRENT

AMS4341H

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or thickness (wall thickness of tubing) and 32 square inches (206 cm2) and under in cross-sectional area (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

2023-12-13

CURRENT

AMS4337C

This specification covers an aluminum alloy in the form of extruded profiles (shapes) 0.500 to 1.500 inch (12.7 to 38.1 mm), inclusive, in nominal thickness, and having a maximum cross-sectional area of 20 square inches (129 cm2) and a maximum circle size of 10 inches (254 mm) (see 8.7).

Standard

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching when Required and Precipitation Heat Treated

2023-11-10

CURRENT

AMS4154S

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.

Standard

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged

2023-09-05

CURRENT

AMS4342G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles 5.000 inches (127.00 mm) and under in nominal diameter or thickness and 32 square inches (206 cm2) and under in cross-sectional area, and tubing 3.000 inches (76.20 mm) and under in wall thickness and 20 square inches (129 cm2) and under in cross-sectional area (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

2023-05-10

CURRENT

AMS4113G

This specification covers an aluminum alloy in the form of extruded profiles such as angles, channels, tees, zees, I-beams, and H-beams.

Standard

Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

2023-03-08

CURRENT

AMS4305A

This specification covers an aluminum alloy in the form of extruded profiles 0.500 to 1.750 inches thick (12.70 to 44.20 mm), inclusive, with a maximum cross-sectional area of 20 square inches (129 cm2) and a maximum circle size of 10 inches (254 mm).

Standard

Heat Treatment of Aluminum Alloy Raw Materials

2023-03-08

CURRENT

AMS2772H

This specification covers requirements and recommendations for the heat treatment of wrought aluminum alloy raw materials (see 2.2.1) by producers. It supersedes AMS-H-6088 and replaces MIL-H-6088.

Standard

Tolerances Copper and Copper Alloy Bars and Rods

2023-01-17

CURRENT

AMS2221H

This specification covers established inch/pound manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.

Standard

Aluminum Alloy, Extruded Profiles, 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2022-11-02

CURRENT

AMS4367A

This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 4.500 inches (1.02 to 114.30 mm), inclusive, in thickness produced with maximum cross sectional area of 56.1 square inches (36199 mm2) and a maximum circumscribing circle diameter (circle size) of 24.4 inches (620 mm) (see 2.4.1 and 8.6).

Standard

Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2022-11-02

CURRENT

AMS4374A

This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 4.500 inches (1.02 to 114.30 mm), inclusive, in thickness produced with maximum cross sectional area of 56.1 square inches (36193 mm2) and a maximum circumscribing circle diameter (circle size) of 20.2 inches (513 mm) (see 2.4.1).

Standard

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened

2022-10-04

CURRENT

AMS4163G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 2.999 inches (76.17 mm), inclusive, in thickness, nominal diameter or wall thickness with cross-sectional area 25 square inches (161 cm2) and under (see 8.6).

Standard

Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn, Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching

2022-09-13

WIP

AMS4402B

This specification covers an aluminum alloy in the form of extruded profiles (shapes) 0.063 to 0.375 inch (1.6 to 10 mm), inclusive, in nominal thickness (see 8.6).

Standard

Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded

2022-09-13

WIP

AMS4350P

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles.

Standard

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged

2022-09-13

WIP

AMS4617B

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 0.040 to 4.499 inches (1.01 to 114.27 mm) inclusive, in nominal diameter or least thickness, and with areas up to 32 in2 (206 cm2), inclusive (see 8.5).

Standard

Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)

2022-06-20

CURRENT

AMS4720J

This specification covers one type of bronze in the form of round wire 0.500 inch (12.70 mm) and under in nominal diameter (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles (2824-T3511), 4.0Cu - 1.35Mg - 0.7Mn, Solution Heat Treated and Stress Relieved by Stretching

2022-03-29

CURRENT

AMS4479A

This specification covers an aluminum alloy in the form of extruded profiles with a maximum cross-sectional area of 25 in2 (160.29 cm2) and nominal thicknesses from 0.250 to 2.500 inch, inclusive (6.3 to 63.50 mm, inclusive) (see 8.7).