Search Results

Standard

Application of Hydraulic Remote Control to Agricultural Tractorsand Trailing Type Agricultural Implements

2003-05-15

CURRENT

J716_200305

This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.

Standard

Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

2002-08-29

HISTORICAL

J2194_200208

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Flashing Warning Lamp for Agricultural Equipment

2002-08-22

HISTORICAL

J974_200208

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

Standard

Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors

2001-03-02

CURRENT

J1036_200103

This SAE Standard specifies the essential interface dimensions, the installation dimensions and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.

Standard

ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

1997-09-01

HISTORICAL

J2194_199709

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Three-Point Hitch, Implement Quick-Attaching Coupler, Agricultural Tractors

1996-07-01

CURRENT

J909_199607

This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers. It is intended to establish those dimensions which are necessary to assure adequate clearance between components and to assure proper functioning of the tractor-implement combination when the implement is attached to the tractor by means of quick-attaching coupler. Design of the latching mechanism and individual components of the coupler not restricted by this document are left to the discretion of the manufacturer.

Standard

SLOW-MOVING VEHICLE IDENTIFICATION EMBLEM

1993-06-10

HISTORICAL

J943_199306

This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements.

Standard

FLASHING WARNING LAMP FOR AGRICULTURAL EQUIPMENT

1993-06-10

HISTORICAL

J974_199306

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

Standard

SAFETY FOR AGRICULTURAL TRACTORS

1993-06-01

HISTORICAL

J208_199306

This SAE Standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural tractors.

Standard

THREE-POINT HITCH, IMPLEMENT QUICK-ATTACHING COUPLER, AGRICULTURAL TRACTORS

1993-06-01

HISTORICAL

J909_199306

This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers.

Standard

ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

1993-06-01

HISTORICAL

J2194_199306

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Three-Point Free-Link Hitch Attachment of Implements to Agricultural Wheeled Tractors

1993-06-01

CURRENT

J715_199306

This SAE Standard sets forth requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors by means of a three-point free-link in association with a power lift.

Standard

DIMENSIONAL STANDARD FOR CYLINDRICAL HYDRAULIC COUPLERS FOR AGRICULTURAL TRACTORS

1993-04-01

HISTORICAL

J1036_199304

This SAE Standard specifies the essential interface dimensions, the installation dimensions, and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.

Standard

OPERATING REQUIREMENTS FOR TRACTORS AND POWER TAKE-OFF DRIVEN IMPLEMENTS

1993-02-04

HISTORICAL

J721_199302

This SAE Standard was prepared to assist manufacturers of tractors and implements in providing suitable means of transmitting power from the tractor power take-off to the Implement and satisfactory hitching of the implement to the tractor.

Standard

FRONT-MOUNTED LINKAGE FOR AGRICULTURAL WHEELED TRACTORS

1992-10-17

HISTORICAL

J2131_199210

This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.

Standard

APPLICATION OF HYDRAULIC REMOTE CONTROL TO AGRICULTURAL TRACTORS AND TRAILING TYPE AGRICULTURAL IMPLEMENTS

1991-03-01

HISTORICAL

J716_199103

This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1:

Standard

MOUNTING BRACKETS AND SOCKET FOR WARNING LAMP AND SLOW-MOVING VEHICLE (SMV) DENTIFICATION EMBLEM

1991-03-01

HISTORICAL

J725_199103

The bracket shown in Figure 1 is intended for fixed attachment to the SMV emblem and to provide, through the tapered portion, a means of detachably mounting the emblem assembly in cooperation with the socket shown in Figure 2.

Standard

THREE-POINT FREE-LINK HITCH ATTACHMENT OF IMPLEMENTS TO AGRICULTURAL WHEELED TRACTORS

1988-10-01

HISTORICAL

J715_198810

This specification sets forth requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors by means of a three-point free-link in association with a power lift. In order to assure proper performance of certain implements, standard dimensions for mast height, mast pitch adjustment, and implement leveling adjustment are included. Location of link attachment points is not restricted and is, therefore, left to the discretion of the tractor designer. If draft links are used for trailing power take-off implements, a means shall be included for locking the draft links in a fixed position, and a draw-bar hitch point shall be positioned in conformance with power take-off standards. Dimensions comprising the standard specification are divided into four categories:

Standard

SLOW-MOVING VEHICLE IDENTIFICATION EMBLEM

1988-06-01

HISTORICAL

J943_198806

This standard establishes emblem dimensional specifications, performance requirements, related test procedures and mounting requirements.

Standard

THREE-POINT FREE-LINK HITCH ATTACHMENT OF IMPLEMENTS TO AGRICULTURAL WHEELED TRACTORS

1988-06-01

HISTORICAL

J715_198806

This specification sets forth requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors by means of a three-point free-link in association with a power lift. In order to assure proper performance of certain implements, standard dimensions for mast height, mast pitch adjustment, and implement leveling adjustment are included. Location of link attachment points is not restricted and is, therefore, left to the discretion of the tractor designer. If draft links are used for trailing power take-off implements, a means shall be included for locking the draft links in a fixed position, and a draw-bar hitch point shall be positioned in conformance with power take-off standards. Dimensions comprising the standard specifications are divided into four categories: